烟气同时脱硫脱氮生物膜填料塔的适用外加碳源

实验分别考察了外加乙酸钠、葡萄糖、酒石酸钾钠、甲醇等4种低分子有机碳源对生物膜填料塔烟气同时脱硫脱氮效率的影响。结果表明,外加乙酸钠的脱氮效果最佳,对NOx的平均去除率为62.05%;外加葡萄糖、酒石酸钾钠、甲醇时的NOx平均去除率分别为51.03%、46.98%、58.71%。乙酸钠、酒石酸钾钠、甲醇均能使SO2的去除率达到100%,葡萄糖显著降低了SO2的去除率。乙酸钠是在生物膜填料塔烟气同时脱硫脱氮技术中适宜的外加碳源。     

脂肽类生物表面活性剂液体发酵条件的响应面优化

通过Plackett-Burman和Box-Behnken实验对解淀粉芽孢杆菌XZ-173液体发酵生产表面活性素进行了响应面优化研究。首先使用Plackett-Burman实验对影响表面活性素产量的17个因素进行显著性筛选,结果表明,MnSO4、CuSO4、温度和转速为显著性因素。再运用Box-Behnken实验对这4个显著因素的取值进一步优化,得到各因素优化后的数值分别为4.4 mg/L(MnSO4)、0.18 mg/L(CuSO4)、29℃(温度)和163 r/min(转速)。响应面分析结果表明:该菌株产生表面活性素的最佳培养基为:葡萄糖15 g/L,蛋白胨5 g/L,L-谷氨酸钠6 g/L,KH2PO40.8 g/L,MgSO40.4 g/L,KCl 0.4 g/L,酵母提取物3 g/L,L-苯丙氨酸2.5 mg/L,MnSO44.4 mg/L,CuSO40.18 mg/L,FeSO40.12 mg/L;最适培养条件:pH 7.5,温度29℃,转速163 r/min,接种量5%,装液量50 mL/250 mL,摇床培养36 h。在优化后的条件下,表面活性素实际产量为336 mg/L,实际实验结果与模型预测结果相一致。表面活性素采用HPLC技术分离,发现其在浓度仅为50 mg/L时EI24就可达到70%以上,反映了表面活性素优异的乳化活性以及广阔的应用前景。     

不同质量浓度苦草对铜绿微囊藻生长及抗氧化酶系统的影响

采用苦草（Vallisneria spiralis Linn.）和铜绿微囊藻（Microcystis aeruginosa）共生培养的实验方法,通过追踪测定铜绿微囊藻的生物量、叶绿素a含量、丙二醛（MDA）含量、超氧化物歧化酶（SOD）和过氧化物酶（POD）活性,研究了不同质量浓度苦草对铜绿微囊藻生长及抗氧化酶系统的影响。结果表明,质量浓度大于10 g/L时,苦草对铜绿微囊藻有明显的抑制作用,表现为苦草质量浓度为10、20和40 g/L时,第15天对铜绿微囊藻的抑制率分别为63.3%、94.7%和99.8%,培养过程中,铜绿微囊藻的叶绿素a含量逐渐减少,而SOD、POD活性及MDA含量呈现先增加后逐渐降低的趋势,表明苦草释放的化感物质在经过一定时间积累后能够明显抑制铜绿微囊藻SOD和POD的活性,引起细胞的氧化损伤,促进叶绿素的分解,从而导致藻类死亡,这是苦草抑制铜绿微囊藻生长的原因之一。     

Fe-MCM-41催化氧化2,4-二氯苯氧乙酸

采用水热法合成了Fe-MCM-41中孔分子筛,紫外、红外及XRD表征显示铁离子已进入中孔分子筛骨架。以H2O2为氧化剂形成类Fenton试剂,实验结果表明,在催化剂加入量为1 g/L、H2O2体积分数为6%、pH为4、反应时间为10h、反应温度为35℃的条件下,处理质量浓度为50 mg/L的2,4-D废水的降解率达94.95%。宏观动力学研究显示,该反应近似为一级反应,反应速率常数、表观活化能分别为0.21667 min-1和26.65 kJ/mol。     

改性矿物吸附剂抗菌作用

通过对蒙脱石、沸石和蛭石进行改性处理,研究了三者对大肠杆菌（E．coB）和猪链球菌（S．suis）的抗菌作用。结果发现,经过改性处理后三者对细菌的抗菌能力上升,其中以双十八烷基二甲基溴化铵改性蒙脱石（DODMAB．MMT）的抗菌效果最好,对E．coli和S．suis的抗菌率达到95％以上。研究了DODMAB—MMT在体外对E．coli和S．suis的抗菌规律,以及对土壤中微生物的影响。结果表明,同等菌液浓度条件下,DODMAB—MMT对S．suis的抗菌效果好于E．coli。介质温度、pH值和有机物浓度都会对DODMAB—MMT的抗菌效果产生影响,在一定范围内,介质温度越高、pH值偏离中性、有机物含量越低时,抗菌效果越好。低浓度DODMAB—MMT（〈25rtlg／g土壤）对土壤中E．coli和S．suis基本无抗菌作用,高浓度DODMAB—MMT对土壤中的E．coli和S．suis具有抗菌作用。     

Degradation of aqueous Rhodamine B by plasma generated along the water surface and its enhancement using nanocrystalline Fe-, Mn-, and Ce-doped TiO2 films

The degradation of aqueous Rhodamine B (RhB) was examined using a dual-channel spark switch module designed to regulate the steepness of pulsed high voltage with microsecond rise time. Depending on the energy per pulse, a spark along the water surface (SPWS) or streamer along the water surface (STWS) was formed. STWS was found to have a better degradation effect and energy efficiency toward RhB than SPWS at the same power; however, addition of H₂O₂ amounts resulted in increased degradation, the effect being more pronounced using SPWS. The initial concentration of RhB also appeared to influence the rate constant of the degradation reaction. Furthermore, TiO₂ films doped with Fe, Mn, and Ce were found to enhance the degradation performance of plasma. A possible reaction mechanism of plasma formation along the water surface was concluded by determination of the main inorganic products in the liquid and gas phases.     

Recycling of WEEE plastics: a review

Electric and electronic equipment (EEE) is swiftly growing in volume, level of sophistication, and diversity. Also, it evolves briskly, moved by innovation and technical change, and draws on numerous and at times rare resources. Waste EEE (WEEE) has evolved into an important societal problem. Recycling and treating WEEE implies occupational as well as environmental hazards that are still incompletely documented. Still, second hand EEE has been exported and treated in Africa, China, and India in a precarious informal context. In developed countries, EEE recycling has been sustained by a wide range of initiatives and motives, such as sustainability, creating jobs, and the value of precious or rare metals. Current EU Directives require a steep reduction of WEEE plastics (WEEP) going to landfill. Mechanical, thermal, and feedstock recycling of WEEP are analysed and some options confronted. Plastics recycling should be weighed against the eventual risks related to their hazardous ingredients, mainly legacy brominated fire retardants and heavy metals. Another paper is related to a somewhat similar problem, yet involving a different mix of plastics: recycling plastics from automotive shredder residue.     

Kinetics of peanut shell pyrolysis and hydrolysis in subcritical water

Biomass is recognized as an important solution to energy and the environmental problems related to fossil fuel usage. The rational utilization of biomass waste is important not only for the prevention of environmental issues, but also for the effective utilization of natural resources. Pyrolysis and hyrolysis in subcritical water are promising processes for biomass waste conversion. This paper deals with hydrolysis and pyrolysis of peanut shells. Hydrolysis and pyrolysis kinetics of peanut shell wastes were investigated for the in-depth exploration of process mechanisms and for the control of the reactions. Hydrolysis kinetics was conducted in a temperature range of 180–240 °C. A simplified kinetic model to describe the hydrolysis of peanut shells was proposed. Hydrolysis activation energy as well as the pre-exponential factor was determined according to the model. The target products of peanut shell hydrolysis, reducing sugars, can reach up to 40.5 % (maximum yield) at 220 °C and 180 s. Pyrolysis characteristics were investigated. The results showed that three stages appeared in this thermal degradation process. Kinetic parameters in terms of apparent pyrolysis activation energy and pre-exponential factor were obtained by the Coats–Redfern method.     

南京大气细粒子中重金属污染特征及来源解析

利用2011年1月、4月、7月和10月在南京市区和北郊采集的气溶胶样品,研究了南京大气细粒子中zn、Ph、Hg、As和cd5种重金属的污染水平,通过元素相关性分析和因子分析方法,对细粒子中这些重金属的污染来源进行了初步解析。结果表明,南京大气细粒子及其重金属污染严重,北郊普遍比市区严重;As严重超标,cd在南京北郊超标约5倍,zn在市区与北郊的质量浓度均高于其他重金属元素。每种重金属的浓度均随季节而变化。市区细粒子中,As和zn可能主要与燃煤、轮胎灰尘和建筑扬尘等有关,Pb、Hg和cd主要来自交通尘、城市垃圾焚烧等。北郊细粒子中,As、Hg和zn主要来源于燃煤、钢铁冶炼等工业,Pb和cd主要与农作物秸秆燃烧、汽车尾气、道路扬尘等影响有关。     

Ce-PbO_2/C电极的制备及其去除水中酸性红B

采用电沉积法制备铈修饰的PbO2/C电极,通过SEM、XRD、XPS及循环伏安对PbO2/C、Ce-PbO2/C电极进行表征,结果表明,Ce-PbO2/C电极比PbO2/C颗粒细小,表面均匀致密,电化学氧化能力较强,修饰电极中Ce以CeO2的形态存在。以Ce-PbO2/C为工作电极,电解浓度为1 000 mg/L的高盐酸性红B模拟活性染料废水,考察了电压、pH、电解质浓度、极间距对脱色率、氨氮去除率及COD去除率的影响。确定适宜工艺条件为：初始酸性红B溶液浓度为1 000 mg/L,pH值为6,电压10 V,电解时间1 h,电极间距1.5 cm,该条件下脱色率、氨氮去除率和COD去除率分别为99.98%、97.23%和90.17%。通过UV-Vis及GC-MS初步分析了降解过程可能存在的中间产物及降解途径。