Review of light-duty diesel and heavy-duty diesel gasoline inspection programs

Emissions from diesel vehicles and gas-powered heavy-duty vehicles are becoming a new focus of many inspection and maintenance (I/M) programs. Diesel particulate matter (PM) is increasingly becoming more recognized as an important health concern, while at the same time, the public awareness of diesel PM emissions because of their visibility have combined to increase the focus on diesel emissions in the United States. This has resulted in an increased interest by some states in including heavy-duty vehicle testing in their I/M program. This paper provides an overview of existing I/M programs focused on testing light-duty diesel vehicles, heavy-duty diesel vehicles, and heavy-duty gasoline vehicles (HDGVs). Information on 39 I/M programs in 27 different states in the United States plus 9 international inspection programs is included. Information on the status of diesel emissions technology and current test procedures is also presented. The goal is to provide useful information for air quality managers as they work to decide whether such I/M programs would be worth pursuing in their respective areas and in evaluating the emissions measurement technology to be used in the program. Testing of HDGVs is generally limited to idle testing, because dynamometer testing of these vehicles is not practical, and most were not certified on a chassis basis. Testing of diesel vehicles has mostly been limited to SAE J1667 "snap-idle" opacity testing. Cost-effective technology for measuring diesel emissions currently does not exist, and, therefore, opacity-type measurements, although not effective at reducing the pollutants of most significant health concern, will continue to be used.     

The potential for anaerobic mineralisation of hydrocarbon constituents of oily drill cuttings from the North Sea seabed

The potential for natural attenuation of hydrocarbons in oily drill cuttings from the seabed beneath a North Sea oil platform was investigated. The study focused on the anaerobic degradation of n-hexadecane, n-octacosane and naphthalene using additions of 14C-labelled analogues to drill cuttings samples and was conducted under realistic seabed conditions (except pressure) over an 11-month period. No mineralisation of naphthalene was detected over this time period and mineralisation of octacosane represented only 0.5-1.5% of the added label. In contrast, mineralisation of hexadecane was 10-49% after 11 months of incubation. Selective inhibition of key functional bacterial groups revealed the key role of both sulfate reduction and methanogenesis in the degradation process. This study demonstrates the potential for natural attenuation of at least some hydrocarbon constituents of oily drill cuttings under realistic environmental conditions and highlights the involvement of a wide functional consortium in the natural attenuation process.     

Temperature effects on chlorinated-benzene sorption to hydrophobic surfaces

Sorption and desorption of chlorinated benzenes were investigated in a series of column experiments using porous silica that had phenyl groups bonded to the surface; the mass-fraction organic carbon was 0.016. Both sorption and desorption curves were asymmetrical, but they were mirror images of each other for most experiments, indicating good sorption reversibility. The resulting breakthrough curves were fit to an advection-dispersion mathematical model, with sorption as a first-order, reversible reaction. Significantly greater tailing in the chlorinated-benzene breakthrough curves versus the salt-tracer ones was evidence of slow sorption and desorption. ΔH° values for di-, tri- and tetra-chlorobenzene were 13–21 kJ mol₋₁, indicative of strong van der Waals binding. Despite these small values, slow desorption was attributed to slow binding and release rather than diffusion through the bonded organic phase. Desorption rates decreased in going from di- to tri- to tetra- to penta-chlorobenzene. This decrease was significantly more than the decrease in molecular-diffusion coefficients in the same series, suggesting a chemical rather than a physical rate control. There was less difference in sorption rates through the series, suggesting an inverse relation between partition coefficient and desorption rate. ΔG° values were −17 to −23 kJ mol⁻¹, giving TΔS° values of about 4 kJ mol⁻¹. Thus enthalpic contributions to sorption appear to be of greater importance than entropic contributions.     

In Situ solidification—A case study at a former manufactured gas plant in Macon,Georgia

In situ solidification (ISS) is a reliable, EPA‐recognized technology for the treatment of industrial and waste sites. ISS was employed at a former manufactured gas plant (MGP) site in Macon, Georgia, for the treatment of approximately 33,000 cubic yards of coal tar residues in the saturated zone soil. The site is regulated by the Georgia Environmental Protection Division (EPD) under the Hazardous Site Rehabilitation Act (HSRA) and is located approximately four blocks from downtown Macon. This article will review the technical and regulatory basis for the successful use of this technology, provide an overview of the treatability and pilot testing used to develop the design and implementation of the treatment process, and present the results of the application of ISS to an MGP site. The results of groundwater monitoring, pre and postremediation, will also be discussed. © 2004 Wiley Periodicals, Inc.     

A data integration framework to support Triad projects

Cost‐effective and efficient site remediation and scientifically defensible decisions require site characterizations that are representative of site conditions. The Triad conceptual site model (CSM) is at the center of a continually improving site characterization process that begins during systematic planning and ends after the last data are developed. To gain the full benefit and greatest cost‐effectiveness, the process of CSM refinement should be performed in real time. Thus, the use of collaborative data is critical for evolving and maturing the CSM. In the field, through the use of all available data that are of known quality, a skilled and experienced field team can collect sufficient site information to mature the CSM in a timely manner. To facilitate the planning and execution of such a process, an easily understandable framework is needed to structure data quality that supports scientifically defensible decisions and efficient projects. This article explores such a framework. © 2004 Wiley Periodicals, Inc.     

Water quality monitoring—Some practical sampling frequency considerations

Water quality monitoring involves sampling a population, water quality, that is changing over time. Sample statistics (e.g., sample mean) computed from data collected by a monitoring network can be affected by three general factors: (1) random changes due to storms, rainfall, etc.; (2) seasonal changes in temperature, rainfall, etc.; and (3) serial correlation or duplication in information from sample to sample. (Closely spaced samples will tend to give similar information).In general, these effects have been noted, but their specific effects on water quality monitoring network design have not been well defined quantitatively. The purpose of this paper is to examine these effects with a specific data set and draw conclusions relative to sampling frequency determinations in network design.The design criterion adopted for this study of effects due to the above factors is the width of confidence intervals about annual sample geometric means of water quality variables. The data base for the study consisted of a daily record of 5 water quality variables at 9 monitoring stations in Illinois for a period of 1 year.Three general regions of frequencies were identified: (1) greater than approximately 30 samples per year where serial correlation plays a dominant role; (2) between approximately 10 and 30 samples per year where the effects of seasonal variation and serial correlation tended to cancel each other out; and (3) less than approximately 10 samples per year where seasonal variation plays a dominant role. In region 2, either seasonal variation and serial correlation should both be considered or both ignored. To consider only seasonal variation introduces more error than ignoring it. These results are network averages (over variables and stations) from one network, thus results for individual variables may deviate considerably from the average and from those for other networks.Financial support for this study was provided, in part, by the U.S. Environmental Protection Agency, grant number R805759-01-0.     

Soil Characteristics and Management in an Urban Park in Hong Kong

3   threshold. With diminished porosity, transmission of air and water, storage of plant-available moisture, and root growth suffer. Chemically, the samples have an unnatural alkaline pH; inadequate organic matter, nitrogen, phosphorus, exchangeable cations; and limited cation exchange capacity. The results can help park-soil management, including the need to evaluate soil in planned park sites, salvage high-grade soil parcels, prevent construction damage, ameliorate structure by mechanical operations and suitable amendments, and replace site soil of very poor quality. Edaphic problems can be forestalled or solved by treating soil as an integral component of park planning and management based on scientific principles and methods.