Evaluation of Cu-PPHs as active catalysts for the SCR process to control NOx emissions from heavy duty diesel vehicles

Copper based catalysts supported on mesoporous materials, which were in turn based on a surfactant expanded zirconium phosphate for the formation of silica galleries in the interlayer space, were prepared by the impregnation method. They were then characterised and tested in the selective catalytic reduction of NO with ammonia as active catalysts for the control of the NOx emissions from heavy duty vehicles. Copper catalysts displayed a high catalytic performance, even in the presence of 14% (v/v) of H2O and 100 ppm of SO2. They also displayed improved catalytic behaviour when compared to a CuZSM5 catalyst.     

Selenium Distribution in Topsoils and Plants of a Semi-arid Mediterranean Environment

Selenium was determined from 25 topsoils and 25 plants in the semi-arid Central Spain where large extents of soils are developed on evaporitic materials. Some species of vegetation associated with them are of the genera Astragalus, Salsola, Mercurialis, Phlomis, Thymus and Atriplex. Total selenium in soils was determined and its bioavailability assessed by chemical sequential fractionation. Se content in soils was adequate (in the range 0.17–0.39 mg kg⁻¹) or large (in the range 0.50–4.38 mg kg⁻¹) and appeared in highly and/or potentially available forms. Several plant species showed high Se levels (in the range 5–14.3 mg kg⁻¹), which can be a potential risk of toxicity to animals. Data obtained from the study area can be used as a guide to the range of values in soils and plants of the European Mediterranean area that are relatively unpolluted from industrial sources, allowing comparison with more polluted areas.     

Development of the IM147: an alternative inspection/maintenance mass-emission transient test to address vehicle preconditioning concerns

A series of studies was performed to develop an alternative to the U.S. Environmental Protection Agency's gold standard IM240 mass-based emission test. The new IM147 test was based on the second phase of the IM240 that consists of 147 sec of transient vehicle operation. Paired IM240/IM147 tests were conducted on vehicles ranging from 1981 to 1996 to determine IM147 cutpoints and excess emissions were identified. Additionally, an optimized test procedure was developed that combined possible triplicate IM147s with improved drive trace quality control, fast-pass, and retest methods. The optimized procedure was found to provide improved vehicle preconditioning with a relatively minor decrease in excess emissions identification. Resulting identification rates ranged from 96 to 100% for hydrocarbons (HC), 93-100% for CO, and 93-100% for NOx, depending on cutpoint selection, while false failures caused by lack of vehicle preconditioning were reduced to essentially zero. Significant vehicle throughput improvements were achieved through the development of software algorithms involving modal fast-pass and retest procedures. Modal drive trace variation limits also were developed to improve test accuracy. The combination of the algorithms reduced average IM147 test times by nearly 60%.     

The removal of microorganisms and organic micropollutants from wastewater during infiltration to aquifers after irrigation of farmland in the Tula Valley, Mexico

The Tula Valley receives untreated wastewater from Mexico City for agricultural irrigation, half of which infiltrates to aquifers from where drinking water is extracted. Samples of wastewater and infiltrated water from three areas of the valley were analyzed for microorganisms, organic micropollutants, and some basic parameters. Concentrations of microorganisms in the infiltrated water were generally very low but the incidence of fecal coliforms (present in 68% of samples), somatic bacteriophages (36%), Giardia spp. (14%), and helminth eggs (8%) suggested a health risk. Organic micropollutants, often present at high concentrations in the wastewater, were generally absent from the infiltrated water except carbamazepine which was in 55% of samples (up to 193 ng/L). There was no correlation between carbamazepine concentrations and the presence of microorganisms but highest concentrations of carbamazepine and boron coincided. A treatment such as nanofiltration would be necessary for the infiltrated water to be a safe potable supply.     

Control of ozone precursors in a complex industrial terrain by using multiscale-nested air quality models with fine spatial resolution (1 km2)

The location of the northeastern Iberian Peninsula (NEIP) in the northwestern Mediterranean basin, the presence of the Pyrenees mountain range (with altitudes > 3000 m), and the influence of the Mediterranean Sea and the large valley canalization of Ebro river induce an extremely complicated structure for the dispersion of photochemical pollutants. Air pollution studies in very complex terrains such as the NEIP require high-resolution modeling for resolving the very complex dynamics of flows. To deal with the influence of larger-scale transport, however, high-resolution models have to be nested in larger models to generate appropriate initial and boundary conditions for the finer resolution domains. This article shows the results obtained through the utilization of the MM5-EMICAT2000-CMAQ multiscale-nested air quality model relating the sensitivity regimes for ozone (O3)-nitrogen oxides (NOx)-volatile organic compounds (VOCs) in an area of high geographical complexity, like the industrial area of Tarragona, located in the NEIP. The model was applied with fine temporal (one-hour) and spatial resolution (cells of 24 km, 2 km, and 1 km) to represent the chemistry and transport of tropospheric O3 and other photochemical species with respect to different hypothetical scenarios of emission controls and to quantify the influence of different emission sources in the area. Results indicate that O3 chemistry in the industrial domain of Tarragona is strongly sensitive to VOCs; the higher percentages of reduction for ground-level O3 are achieved when reducing by 25% the emissions of industrial VOCs. On the contrary, reductions in the industrial emissions of NOx contribute to a strong increase in hourly peak levels of O3. At the same time, the contribution of on-road traffic and biogenic emissions to ground-level O3 concentrations in the area is negligible with respect to the pervasive weight of industrial sources. This analysis provides an assessment of the effectiveness of different policies for the control of emission of precursors by comparing the modeled results for different scenarios.     

活性炭纤维（ACF）电极法处理染料废水的探讨

根据Ａｄｖａｎｃｅｄ Ｃｈｅｍｉｃａｌ Ｏｘｉｄａｔｉｏｎ＾［１］［６］的原理，通过ＡＣＦ电极的引入，使得电化学处理成为一个自由基反应与絮凝反应相结合的过程，对于多种模拟印染废水可以具有良好的处理效果。通过与其他方法的对比实验，表明在色度去除率方面不比Ｆｅｎｔｏｎ试剂法逊色，并明显优于絮凝法。经过单级处理，对于实验范围内的还原染料、酸性染料、活性染料及硫化染料，其脱色率全部大于９０％，大多数为９８     

Cadmium, copper, lead, and zinc in Mugil cephalus from seven coastal lagoons of NW Mexico

The increasing order of the mean concentrations of Cd, Cu, and Zn in the tissues of Mugil cephalus of seven coastal lagoons of Sinaloa State (NW Mexico) was liver > gills > muscle, while for Pb it was gills > muscle ≥ liver. There were no differences between the mean concentrations of Cd and Pb of the three tissues determined in the samples of the seven lagoons and, although there were some significant differences, there was no indication of a latitude-related trend in the distribution of Cu and Zn: the Cu content of the muscle tended to be higher in the northern than in the southern lagoons, although in the case of the gills the highest and lowest mean values indicated an opposite trend, with the highest and lowest values in one southern and one northern lagoon. In the case of the liver, there were no differences and no indication of a regional trend. There were no differences in the mean Zn contents of muscle and gills; in the case of the liver, one of the lagoons of the central part of the state had a significantly higher value than one of the southern lagoons and all the rest had similar values. In addition, there was no clear indication of season-related differences in any of the three tissues. According to our results, the metal contents of the muscle of this species are not of concern for human health, since the allowable ingestion would be in the order of 0.9 kg/day.     

Automatic continuous river monitoring of nitrate using a novel ion-selective electrode

On-site continuous measurement of nitrate in the River Taw situated in Devon (UK) was performed automatically for two months using a recently developed ion-selective electrode (ISE). A non-submersible electrode support system was developed and a field instrument was constructed comprising the nitrate-ISEs, a reference electrode and a temperature probe connected through a pre-amplifier to a data-logger and battery supply. The nitrate-ISE was constructed using a commercially available electrode body with a membrane incorporated into the tip. This rubbery membrane contained the sensor molecule (N,N,N-triallylleucine betaine chloride, 6.5% m/m) covalently bound to polystyrene-block-polybutadiene-block-polystyrene, SBS, (43.5% m/m), with 2-nitrophenyloctyl ether (2-NPOE) as mediator (40% m/m). The Nernstian slope was -59.1 mV per decade over a linear range of 1400-0.07 mg L(-1) nitrate-N. The limit of detection was 0.007 mg L(-1) nitrate-N with a selectivity coefficient for nitrate against chloride (k(pot)NO3-, Cl-) of 3.4 x 10(-3). The speed of response was less than a minute over the linear Nernstian range. The lifetime in the laboratory exceeded 5 months with no potentiometric drift over the linear Nernstian range. A temperature correction algorithm was also used to accomodate the temperature changes encountered in the river. The river nitrate results obtained with the ISEs at hourly intervals compared very favourably (R2 = 0.9) with those obtained with laboratory automated chemical determinations made on contemporaneous river samples over a concentration range 0.55-2.00 mg L(-1) nitrate-N. The ISEs did not require re-calibration and no deterioration in performance or fouling of the membrane surface was observed during 40 days.     

Exploring the relationship between nitrogen dioxide and ground-level ozone by applying the joint multifractal analysis

The main goal of this study is to determine the present heavy metal pollution state in the two gulfs of the Aegean Sea; Saros and Gökova Gulfs. The surface sediments were collected from 11 and eight locations in the Saros and Gökova during May 2001, respectively. The results showed that the sediments of Saros and Gökova gulfs were polluted with Pb, Cr, Zn, Mn, and Ni and Pb, Cr, Ni, and Mn, respectively. For various metals the contamination factor (CF) has been calculated to assess the degree of pollution in sediments. The sediments were noted to be not contaminated with Hg, Cd, and Cu in all areas. Moderate contaminations were observed for Pb, Cr, and Zn in Saros Gulf. The CF was moderate and very high for Ni in the Saros and the Gökova Gulf, respectively.