Methods of characterizing the distribution of exhaust emissions from light-duty, gasoline-powered motor vehicles in the U.S. fleet

Mobile sources significantly contribute to ambient concentrations of airborne particulate matter (PM). Source apportionment studies for PM10 (PM < or = 10 microm in aerodynamic diameter) and PM2.5 (PM < or = 2.5 microm in aerodynamic diameter) indicate that mobile sources can be responsible for over half of the ambient PM measured in an urban area. Recent source apportionment studies attempted to differentiate between contributions from gasoline and diesel motor vehicle combustion. Several source apportionment studies conducted in the United States suggested that gasoline combustion from mobile sources contributed more to ambient PM than diesel combustion. However, existing emission inventories for the United States indicated that diesels contribute more than gasoline vehicles to ambient PM concentrations. A comprehensive testing program was initiated in the Kansas City metropolitan area to measure PM emissions in the light-duty, gasoline-powered, on-road mobile source fleet to provide data for PM inventory and emissions modeling. The vehicle recruitment design produced a sample that could represent the regional fleet, and by extension, the national fleet. All vehicles were recruited from a stratified sample on the basis of vehicle class (car, truck) and model-year group. The pool of available vehicles was drawn primarily from a sample of vehicle owners designed to represent the selected demographic and geographic characteristics of the Kansas City population. Emissions testing utilized a portable, light-duty chassis dynamometer with vehicles tested using the LA-92 driving cycle, on-board emissions measurement systems, and remote sensing devices. Particulate mass emissions were the focus of the study, with continuous and integrated samples collected. In addition, sample analyses included criteria gases (carbon monoxide, carbon dioxide, nitric oxide/nitrogen dioxide, hydrocarbons), air toxics (speciated volatile organic compounds), and PM constituents (elemental/organic carbon, metals, semi-volatile organic compounds). Results indicated that PM emissions from the in-use fleet varied by up to 3 orders of magnitude, with emissions generally increasing for older model-year vehicles. The study also identified a strong influence of ambient temperature on vehicle PM mass emissions, with rates increasing with decreasing temperatures.     

Linking movement, diving, and habitat to foraging success in a large marine predator

Establishing where and when predators forage is essential to understanding trophic interactions, yet foraging behavior remains poorly understood in large marine carnivores. We investigated the factors leading to foraging success in gray seals (Halichoerus grypus) in the Northwest Atlantic in the first study to use simultaneous deployments of satellite transmitters, time depth recorders, and stomach-temperature loggers on a free-ranging marine mammal. Thirty-two seals were each fitted with the three types of instrumentation; however, complete records from all three instruments were obtained from only 13 individuals, underscoring the difficulty of such a multi-instrument approach. Our goal was to determine the characteristics of diving, habitat, and movement that predict feeding. We linked diving behavior to foraging success at two temporal scales: trips (days) and bouts (hours) to test models of optimal diving, which indicate that feeding can be predicted by time spent at the bottom of a dive. Using an information-theoretic approach, a Generalized Linear Mixed Model with trip duration and accumulated bottom time per day best explained the number of feeding events per trip, whereas the best predictor of the number of feeding events per bout was accumulated bottom time. We then tested whether characteristics of movement were predictive of feeding. Significant predictors of the number of feeding events per trip were angular variance (i.e., path tortuosity) and distance traveled per day. Finally, we integrated measures of diving, movement, and habitat at four temporal scales to determine overall predictors of feeding. At the 3-h scale, mean bottom time and distance traveled were the most important predictors of feeding frequency, whereas at the 6-h and 24-h time scales, distance traveled alone was most important. Bathymetry was the most significant predictor of feeding at the 12-h interval, with feeding more likely to occur at deeper depths. Our findings indicate that several factors predict feeding in gray seals, but predictor variables differ across temporal scales such that environmental variation becomes important at some scales and not others. Overall, our results illustrate the value of simultaneously recording and integrating multiple types of information to better understand the circumstances leading to foraging success.     

Cocoa Intensification Scenarios and Their Predicted Impact on CO<Subscript>2</Subscript> Emissions,Biodiversity Conservation,and Rural Livelihoods in the Guinea Rain Forest of West Africa

The Guinean rain forest (GRF) of West Africa, identified over 20 years ago as a global biodiversity hotspot, had reduced to 113,000 km² at the start of the new millennium which was 18% of its original area. The principal driver of this environmental change has been the expansion of extensive smallholder agriculture. From 1988 to 2007, the area harvested in the GRF by smallholders of cocoa, cassava, and oil palm increased by 68,000 km². Field results suggest a high potential for significantly increasing crop yields through increased application of seed-fertilizer technologies. Analyzing land-use change scenarios, it was estimated that had intensified cocoa technology, already developed in the 1960s, been pursued in Cote d’Ivoire, Ghana, Nigeria and Cameroon that over 21,000 km² of deforestation and forest degradation could have been avoided along with the emission of nearly 1.4 billion t of CO₂. Addressing the low productivity of agriculture in the GRF should be one of the principal objectives of REDD climate mitigation programs.     

The Effect of Chain Extender on Poly(3-hydroxybutyrate-co-3-hydroxyvalerate): Thermal Degradation,Crystallization, and Rheological Behaviours

Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), a semi-polycrystalline biopolymer from the polyhydroxyalkanonate family has in recent years become a commercial bioplastic with mechanical properties comparable to isotactic polypropylene and enhanced O₂, CO₂ and H₂O barrier properties. However, its brittleness and sensitivity to thermal and hydrolysis degradations restrict its applications. To overcome the problems associated with degradation during processing blending of PHBV and an epoxy-functionalized chain extender (Joncryl^® ADR-4368 S) was conducted in a twin screw extruder. The effect of concentration of the chain extender on thermal, crystallization and rheological behaviours of PHBV was investigated. Thermal gravimetric analysis results indicated improvement in the resistance to thermal decomposition of PHBV by introducing the chain extender. This was accompanied with calculation of thermal degradation activation energy (E_a) using the Flyn–Walls–Ozawa method which confirmed increase of E_a with the increase in content of the chain extender. The rheological behaviour and crystallization of modified PHBV was characterized by rotational rheometry and differential scanning calorimetry techniques, respectively. The results show that addition of chain extender enhanced viscosity of PHBV and also reduce the rate of crystallization.     

Optimization of Microwave-Assisted and Conventional Heating Comparative Synthesis of Poly(lactic acid) by Direct Melt Polycondensation from Agroindustrial Banana (Musa AAA Cavendish) and Pineapple (Ananas comosus) Fermented Wastes

In Costa Rica, a lot of pineapple (Ananas comosus) and banana (Musa AAA) agroindustrial residues are generated each year. These residues can be used to obtain l-lactic acid by fermentation, ultrafiltration and electrodialysis. Poly(l-lactic acid) (PLLA) is a biodegradable and renewable polyester with many industrial and biomedical applications. There is a growing interest to improve the energetic efficiency of the synthesis of PLLA, because the main issue to produce this polymer is the high productive cost compared with petrochemical traditional commodities. In this research, the synthesis of PLLA through two different techniques was compared: microwave-assisted and conventional heating. On microwave synthesis the best results were obtained using lower temperatures and lower reaction times than the conventional heated synthesis. The reaction time was reduced from 15 h by conventional heating to 4.5 h using microwave-assisted synthesis.     

Integrated pollution evaluation of the Tagus River in Central Spain

The aim of this study was to integrate hydrochemical and sediment data in order to obtain a picture of the pollution state of the Tagus River along central Spain. This area is of special interest because tributaries from the Madrid region are discharged and no previous data were available. Waters and sediments were sampled between 2002 and 2004 from selected sites before and after Jarama River confluence (Madrid city input). The samples were analysed for more than 50 parameters, including those of physico-chemical nature and those reporting the pollution caused by both metals and organic compounds. The quality of waters for different uses has been tested and statistical quality indexes of both global and partial type has also been established. Sediments pollution state was evaluated by comparison with general quality standards. A high degree of pollution and general degradation was observed in the Tagus River downstream the Jarama River input. The pollution of waters is mainly related to parameters indicators of organic pollution from urban sewage. In sediments, a dramatic increase in the concentration of trace metals was found in different points, exceeding toxicological threshold. Further studies would be necessary for organic pollutants and also to evaluate the remobilization potential.     

Red soil geochemistry in a semiarid Mediterranean environment and its suitability for vineyards

A geochemical study of a red soil derived from plioquaternary materials was carried out. The soil was located in a region of complex geomorphology and pedologic evolution, with particular characteristics of a Mediterranean climate associated with processes of alteration, rubification, gleying (hydromorphism) and argillization. The depth distribution of 27 trace elements was studied in order to determine the amounts of these elements in the soil and its tendency. The mineralogy of the clay fraction was also studied along with other physico-chemical properties to elucidate in terms of attributes meaningful for viticulture. The geochemical composition of the horizons was studied. The effect of human activities on the soil was investigated as well as the geographical origin of Mancha wines. It was found that these activities did not give rise to significant variations of trace elements, although a discontinuity related to the accumulation of new materials was detected. Ultimately, using established productivity standards, suitability for the cultivation of vines on these soils was determined.     

Characteristics of major volatile organic hazardous air pollutants in the urban air of Kaohsiung city

The concentrations and characteristics of volatile organic hazardous air pollutants (HAPs) in the urban city of Kaohsiung from motor vehicles and dense pollutant sources has become a national concern. To continuously monitor volatile organic HAPs, sampling sites were selected near the four air-quality monitoring stations established by Ethe nvironmental Protection Administration of Taiwan ROC, namely Nan-tz, Tso-ying, San-min and Hsiao-kang, from north to south. An on-site automated online monitor of volatile organic compounds (VOCs) was used for continuous monitoring. This study performed two consecutive days of 24-h monitoring of five volatile organic HAPs form August to October 2005 at the four monitoring sites, which cover the northern, central, and southern areas of Kaohsiung city. The average monitored concentration was 2.78–4.84 ppb for benzene, 5.90–9.66 ppb for toluene, 3.62–5.90 ppb for ethylbenzene, 3.73–5.34 ppb for m,p-xylene, 3.38–4.22 ppb for o-xylene, and 4.48–7.00 ppb for styrene. The average monitored concentrations of the major volatile organic HAPs tended to follow the pattern San-min > Nan-tz > Hsiao-kang > Tso-ying. Among all the species monitored in this study, toluene had the highest ambient concentration, followed by styrene, m,p-xylene, ethylbenzene, o-xylene, and benzene. The results showed that the concentration at night was higher than that in the day for toluene at Nan-tz, San-min, Hsiao-kang, and for benzene at Nan-tz and Hsiao-kang.     

Managing Excessive Methanogenesis During ERD/ISCR Remedial Action

Excessive production of methane has been observed at some remediation sites following the addition of organic hydrogen donors such as (emulsified) oils/lecithin, sugars, and conventional carbon + zero‐valent iron (ZVI) amendments. This is due to the fact that methanogens are commonly the most ubiquitous indigenous microbes in anoxic aquifer settings, and, under enriched environmental conditions, methanogens replicate every one to two hours (whereas Dehalococcoides spp., e.g., double in 24–48 hr). Hence, methanogens often bloom and dominate the microbial ecosystem following the addition of remedial amendments, thereby liberating large amounts of methane gas. There are at least three important consequences of this response:

1. By utilizing hydrogen, the methanogens compete with dechlorinating microbes, thus making inefficient use of the remedial amendment (just 20 ppm methane in groundwater represents an approximate 30 percent “waste” of added fermentable substrate (i.e., hydrogen donor)—this is a common and tangible detriment);
2. Methanogens can methylate heavy metals and their rapid growth consumes alkalinity, while generating acidity, thereby facilitating multiple potential mechanisms for creating secondary contaminant issues (i.e., arsenic plumes); and
3. Elevated methane concentrations can exceed current and pending regulations of <10 to <28 ppm methane in groundwater and/or 0.5 percent by volume methane in soil gas (e.g., 10 percent of the lower explosive limit) and/or indoor air (methane is flammable between 5 percent and 15 percent by volume) and this will induce migration of contaminant vapors potentially causing indoor air issues.

Considering the recent guidelines for indoor air published by the US Environmental Protection Agency, it is increasingly important to prevent excessive methanogenesis associated with remedial actions. From a regulatory perspective, public safety issues are paramount; from a property re‐use or real estate (brownfield) developers’ perspective, project delays are costly and can jeopardize an entire program. The use of antimethanogenic compounds as inhibitors of protein biosynthesis and the activity of enzyme systems unique to Archaea (i.e., methanogens) during in situ remedial action can improve contaminant removal while offering safer, more efficacious treatment, simply by impeding the methanogenic bacteria's ability to proliferate and out compete desired bacterial communities (e.g., Dehalococcoides spp.). ©2016 Wiley Periodicals, Inc.     

Water — and nutrient and energy — systems in urbanizing watersheds

Driven by considerations of sustainability, it has become increasingly difficult over the past 15?C20 years ?? at least intellectually ?? to separate out the water infrastructure and water metabolism of cities from their intimately inter-related nutrient and energy metabolisms. Much of the focus of this difficulty settles on the wastewater component of the city??s water infrastructure and its associated fluxes of nutrients (N, P, C, and so on). Indeed, notwithstanding the massive volumes of these materials flowing into and out of the city, the notion of an urban nutrient infrastructure is conspicuous by its absence. Likewise, we do not tend to discuss, or conduct research into, ??soilshed?? agencies, or soilshed management, or Integrated Nutrient Resources Management (as opposed to its most familiar companion, Integrated Water Resources Management, or IWRM). The paper summarizes some of the benefits (and challenges) deriving from adopting this broader, multi-sectoral ??systems?? perspective on addressing water-nutrient-energy systems in city-watershed settings. Such a perspective resonates with the growing interest in broader policy circles in what is called the ??water-food-energy security nexus??. The benefits and challenges of our Multi-sectoral Systems Analysis (MSA) are illustrated through computational results from two primary case studies: Atlanta, Georgia, USA; and London, UK. Since our work is part of the International Network on Cities as Forces for Good in the Environment (CFG; see www.cfgnet.org), in which other case studies are currently being initiated ?? for example, on Kathmandu, Nepal ?? we close by reflecting upon these issues of water-nutrient-energy systems in three urban settings with quite different styles and speeds of development.