滇中城市PM2.5污染防治对策研究

以昆明市为重点,调查了昆明、玉溪、曲靖等滇中3个主要城市的PM2.5监测与污染现状,初步分析认为:滇中城市PM2.5污染主要来源于建筑施工扬尘、汽车尾气排放和工业排放,且在不同的城市,上述3项PM2.5污染主要来源所占的比重有所不同。据此提出了滇中城市PM2.5污染综合防治对策措施。     

一种海洋气候环境-摩擦载荷耦合试验设备的研制

目的研制一台海洋气候环境-摩擦载荷耦合试验设备。方法针对相对运动部件在海洋环境下的服役条件,为评价其材料腐蚀磨损性能,分析摩擦载荷与气候环境可能对运动部件造成的交互作用,从机械结构上进行创新,研制一台海洋气候环境-摩擦载荷耦合试验设备。结果该设备可在一定范围内实行载荷、速度控制,利用传感器和数据采集系统完成对摩擦力、摩擦系数、温湿度的采集。设备包含6套下试样夹具,可实现6个样品轮转试验。结论该设备适用于研究服役于海洋气候环境下的材料的腐蚀磨损性能。     

2012年-2013年常州市PM2.5空气污染气象条件及天气形势特征分析研究

利用2012年-2013年常州市大气监测资料、2009年-2013年NECP再分析气象资料和日降水资料,对近两年常州市空气污染特征及其与气象条件的关系进行分析.结果表明2013年常州市污染事件相比2012年具有发生频率高、持续时间长和程度重等特点.造成污染天气异常偏多的气象条件是有效降水日异常减少,反映区域混合型PM2.5污染的地面系统不利扩散特征在2013年表现突出,污染高发期地面均压场范围扩大,对流层整层有异常抑制上升作用.典型PM2.5污染个例分析表明重污染天气尺度形势特征主要体现在高压型和冷空气外部输送型,其次为低压和均压场型.     

Significance of adverse outcome pathways in biomarker-based environmental risk assessment in aquatic organisms

In environmental risk assessments (ERA), biomarkers have been widely used as an early warning signal of environmental contamination. However, biomarker responses have limitation due to its low relevance to adverse outcomes (e.g., fluctuations in community structure, decreases in population size, and other similar ecobiologically relevant indicators of community structure and function). To mitigate these limitations, the concept of adverse outcome pathways (AOPs) was developed. An AOP is an analytical, sequentially progressive pathway that links a molecular initiating event (MIE) to an adverse outcome. Recently, AOPs have been recognized as a potential informational tool by which the implications of molecular biomarkers in ERA can be better understood. To demonstrate the utility of AOPs in biomarker-based ERA, here we discuss a series of three different biological repercussions caused by exposure to benzo(a)pyrene (BaP), silver nanoparticles (AgNPs), and selenium (Se). Using mainly aquatic invertebrates and selected vertebrates as model species, we focus on the development of the AOP concept. Aquatic organisms are suitable bioindicator species whose entire lifespans can be observed over a short period; moreover, these species can be studied on the molecular and population levels. Also, interspecific differences between aquatic organisms are important to consider in an AOP framework, since these differences are an integral part of the natural environment. The development of an environmental pollutant-mediated AOP may enable a better understanding of the effects of environmental pollutants in different scenarios in the diverse community of an ecosystem.     

Design and demonstration of a next-generation air quality attainment assessment system for PM2.5 and O3

Due to the increasingly stringent standards, it is important to assess whether the proposed emission reduction will result in ambient concentrations that meet the standards. The Software for Model Attainment Test—Community Edition (SMAT-CE) is developed for demonstrating attainment of air quality standards of O₃ and PM_2.5. SMAT-CE improves computational efficiency and provides a number of advanced visualization and analytical functionalities on an integrated GIS platform. SMAT-CE incorporates historical measurements of air quality parameters and simulated air pollutant concentrations under a number of emission inventory scenarios to project the level of compliance to air quality standards in a targeted future year. An application case study of the software based on the U.S. National Ambient Air Quality Standards (NAAQS) shows that SMAT-CE is capable of demonstrating the air quality attainment of annual PM_2.5 and 8-hour O₃ for a proposed emission control policy.     

Design and demonstration of a next-generation air quality attainment assessment system for PM2.5 and O3

Due to the increasingly stringent standards, it is important to assess whether the proposed emission reduction will result in ambient concentrations that meet the standards. The Software for Model Attainment Test—Community Edition (SMAT-CE) is developed for demonstrating attainment of air quality standards of O₃ and PM_2.5. SMAT-CE improves computational efficiency and provides a number of advanced visualization and analytical functionalities on an integrated GIS platform. SMAT-CE incorporates historical measurements of air quality parameters and simulated air pollutant concentrations under a number of emission inventory scenarios to project the level of compliance to air quality standards in a targeted future year. An application case study of the software based on the U.S. National Ambient Air Quality Standards (NAAQS) shows that SMAT-CE is capable of demonstrating the air quality attainment of annual PM_2.5 and 8-hour O₃ for a proposed emission control policy.     

Effects of different sludge disintegration methods on sludge moisture distribution and dewatering performance

A key step in sludge treatment is sludge dewatering. However, activated sludge is generally very difficult to be dewatered. Sludge dewatering performance is largely affected by the sludge moisture distribution. Sludge disintegration can destroy the sludge structure and cell wall, so as change the sludge floc structure and moisture distribution, thus affecting the dewatering performance of sludge. In this article, the disintegration methods were ultrasound treatment, K₂FeO₄ oxidation and KMnO₄ oxidation. The degree of disintegration (DD_COD), sludge moisture distribution and the final water content of sludge cake after centrifuging were measured. Results showed that three disintegration methods were all effective, and K₂FeO₄ oxidation was more efficient than KMnO₄ oxidation. The content of free water increased obviously with K₂FeO₄ and KMnO₄ oxidations, while it decreased with ultrasound treatment. The changes of free water and interstitial water were in the opposite trend. The content of bounding water decreased with K₂FeO₄ oxidation, and increased slightly with KMnO₄ oxidation, while it increased obviously with ultrasound treatment. The water content of sludge cake after centrifuging decreased with K₂FeO₄ oxidation, and did not changed with KMnO₄ oxidation, but increased obviously with ultrasound treatment. In summary, ultrasound treatment deteriorated the sludge dewaterability, while K₂FeO₄ and KMnO₄ oxidation improved the sludge dewaterability.     

Two-year measurements of surface ozone at Dangxiong, a remote highland site in the Tibetan Plateau

Measurements of surface O3 and carbon monoxide(CO) were made from September 2009 to August 2011 at Dangxiong(30.48°N, 91.10°E, 4187 m a.s.l.), a remote highland site in a southern valley of the Nyainqêntanglha Mountains in the Tibetan Plateau, China. The monthly mean O3 mixing ratio ranged from 29.1 to 51.4 ppb, with an average of 38.5 ppb, and the maximum value was observed in May. The average diurnal cycle of O3 concentration showed a minimum in early morning and a maximum in the afternoon, with a broader "high platform" from the late morning to the late afternoon, and resembled that of surface wind speed. The concentration of surface O3 was highly significantly correlated with tropospheric column O3 over the regions surrounding Dangxiong and with that of surface O3 observed at a site north of the Nyainqêntanglha Mountains, suggesting a good regional representativeness of surface O3 at Dangxiong. In the afternoon when stronger winds blew, surface air showed distinct features of free-atmospheric air, with higher O3, lower CO, and lower relative humidity(RH). The negative O3–CO and O3–RH correlations in most months indicate a significant influence of air masses from the free troposphere. Trajectory analysis suggests that air masses originating from the south of the site make a negative net contribution to surface O3 and a positive contribution to CO and humidity, and those from the northwest sector contribute conversely to the respective quantities.     

Effects of temperature and composite alumina on pyrolysis of sewage sludge

An interactive dual-circulating fluidized bed system has been proposed in which the pyrolysis of sewage sludge(SS) and incineration of biomass proceed simultaneously, and alumina is used as the bed material and heat carrier. The alumina coated with biomass ash would mix with sewage sludge in the pyrolysis reactor of this device. It is important to know the influence of composite alumina(CA) on the pyrolysis progress. Sewage sludge was pyrolyzed in a fixed bed reactor from 400 to 600°C using CA as catalyst. The effects of temperature and CA additive ratio on the products were investigated. The product yields and component distribution of non-condensable gas were more sensitive to the change of temperature, and the maximum liquid yield of 48.44 wt.% and maximum Useable Energy of Liquid of 3871 k J/kg sludge were observed at 500°C with 1/5 CA/SS(mass ratio). The gas chromatography–mass spectrometry results showed that the increase of temperature enhanced devolatilization of organic matter and promoted cyclization and aromatization of aliphatics. The presence of CA could strengthen secondary cracking and interaction among primary products from different organic compounds, such as acid–amine condensation,and reduce the content of oxygenated compounds. When the CA additive amount exceeded a certain proportion, the aromatization was clearly strengthened. The effects of CA on decomposition of fatty acids and formation of aromatics were similar to that of temperature. This means that the reaction temperature could be lowered by introducing CA, which has a positive effect on reducing energy consumption.     

Pretreatment of cyanided tailings by catalytic ozonation with Mn2+/O3

The increasing amount of cyanided tailings produced as a by-product has gained significant attention in recent years because of the rapid development of the gold industry and extensive exploitation of gold mineral resources. The effective use of these secondary resources is becoming an important and urgent problem for all environmental protection staff. Manganese-catalyzed ozonation for the pre-oxidation of cyanided tailings was studied and the effects of Mn²⁺ dosage, initial sulfuric acid concentration, ozone volume flow, temperature and agitation speed on pretreatment were examined. The optimum reaction conditions were observed to be: ore pulp density 2.5%, agitation speed 700 r/min, temperature 60 ℃, Mn²⁺ dosage 40 g/L, ozone volume flow 80 L/hr, initial sulfuric acid concentration 1 mol/L, and reaction time 6 hr. Under these conditions, the leaching rate of Fe and weight loss could reach 94.85% and 48.89% respectively. The leaching process of cyanided tailings by Mn²⁺/O³ was analyzed, and it was found that the leaching of pyrite depends on synergetic oxidation by high-valent manganese and O³, in which the former played an important part.