节能型虹吸式滗水器的设计与应用

详细介绍了虹吸式滗水器的构成、特点及工作原理,结合理论和实践经验给出了虹吸式滗水器的设计、计算方法及关键设计参数,提出了常规使用方法,整套设备的设计全面而简单明了。     

电石渣-石膏湿法烟气脱硫废水处理工艺研究

电石渣-石膏湿法脱硫废水与石灰石-石膏湿法脱硫废水存在差异,主要体现在悬浮物与COD较难去除,采用在中和池添加助凝剂与曝气池添加氧化剂的方法,可在沿用石灰石法脱硫废水处理工艺设计的前提下达到对电石渣法脱硫废水的良好处理效果。     

滴灌沼液对茶园土壤-茶树氮磷含量影响研究

茶园滴灌沼液,不仅可以将沼液进行生态处理,避免其造成二次污染,而且可以充分利用沼液中营养成分,提高茶园效益。实验表明,适时滴灌沼液可以保持土壤中铵态氮含量,有利于提高茶叶产量;可以改善土壤结构,增强土壤微生物活性,使滴灌区土壤中有效磷含量升高,滴灌可以提高氮磷的利用率。与非滴灌区相比,滴灌系统水肥耦合较好,更利于茶树吸收利用养分。就产茶中氮磷含量作为茶树对氮磷的吸收量而言,与非滴灌区相比,滴灌区茶树对氮磷的吸收利用率分别提高了18.12%、8.33%。     

藏南羊卓雍错湖水化学空间分异特征

2010年7月对藏南羊卓雍错流域进行了水样采集,通过测定与分析,揭示了流域最大湖泊羊卓雍错表层湖水化学水平分布特征和深水剖面变化规律,并探讨了该湖与流域其他水体化学性质的差异。结果表明:流域特殊的高寒气候、湖泊形状与补给来源、湖岸水系发育程度不同是造成羊卓雍错湖水化学空间分异特征明显的关键。在水平方向上,湖水HCO3-、Ca2+以及矿化度南高北低,而SO42-和Mg2+南低北高。这是由于湖水从南向北缓慢流动过程中蒸发浓缩所致;卡鲁雄曲径流量经空姆错补给羊卓雍错北部,使其矿化度较低。在垂直方向上,愈向湖泊深处,湖水SO42-、Cl-、CO32-和矿化度愈大,HCO3-则降低。与流域其他湖泊相比,羊卓雍错水化学性质与同属以降水补给为主的湖泊相近,与以冰雪融水补给为主的湖泊差异显著。与河水和地下水相比,羊卓雍错湖水SO42-和Mg2+当量浓度最大,河水和地下水则HCO3-和Ca2+含量较大。     

常州夏冬季PM2.5中无机组分昼夜变化特征与来源解析

为探讨常州大气气溶胶中无机组分的昼夜变化特征,在夏冬两季分别连续采集1个月的PM2.5样品,对比分析了11种水溶性离子和13种重金属元素的昼夜特征和来源.结果表明,夏冬两季PM2.5平均质量浓度白天高于夜间,水溶性离子占比夜间稍高于白天.冬季水溶性离子占PM2.5的比例(44%~45%)高于夏季(31%~36%),而重金属元素呈现相反的季节性特征(冬季白天3.03%,夜间2.29%;夏季白天4.40%,夜间4.51%).SO_4~(2-)、NO_3~-、NH_4~+是主要的二次离子,占总水溶性离子77%~85%,说明常州市大气污染呈二次污染为主的复合污染特征.夏季强太阳辐射的光化学反应导致白天SO_4~(2-)占比(49.0%)稍高于夜间(41.1%),而白天高温NH_4NO_3分解,使NO_3~-浓度白天(1.98μg·m-3)远低于夜间(5.10μg·m-3).NH_4~+与SO_4~(2-)、NO_3~-之间好的线性相关性及预测NH_4~+与实测NH_4~+的比值接近1,表明NH_4~+主要以(NH4)2SO4,NH_4NO_3和NH4Cl形态存在.离子平衡表明夏季颗粒物呈弱碱性,冬季呈中性.Fe、Al和Zn这3种重金属元素占比最大,Fe和Al元素白天占比明显高于夜间,Zn正好相反.无机组分相关性及主成分分析表明,无机组分都来自二次生成、扬尘和交通等排放源,表现一定的季节性和昼夜变化特征.     

黄河源区鄂陵湖中多环芳烃的百年沉积记录

为研究黄河源区多环芳烃（PAHs）的污染历史,于2016年7月在鄂陵湖中采集了沉积物柱芯,采用²¹⁰Pb定年,利用气相色谱串联三重四级杆质谱仪（GC-MS/MS）分析了16种PAHs,运用有序聚类分析对PAHs的垂向分布进行分带,并采取主成分分析及多元线性回归定量分析了PAHs的来源.结果表明,鄂陵湖沉积柱的沉积速率为0.176cm/a,慢于青藏高原多数湖泊.总PAHs的含量为11.3~54.7ng/g,平均值为29.2ng/g,与其他高原和偏远地区湖泊沉积物相比,处于较低水平,可被视为PAHs的全球沉积物背景值.PAHs的垂向变化分为1948年以前、1948~1976和1976~2016年3个时间段,5~6环PAHs在1948~2016年间呈上升趋势,与青海省人口及大型牲畜数量显著相关,反映了鄂陵湖地区近70a来的人类活动以农牧业为主.PAHs来源分为本地源（23%）以及长距离迁移与本地混合源（77%）.本地源的垂向变化与5~6环PAHs一致,代表了青藏高原地区以牛粪饼为主要燃料的生物质燃烧源.     

Polymer hydrogels with enhanced stability and heterogeneous Fenton activity in organic pollutant removal

Polymer hydrogel-based materials have been shown to act as novel Fenton catalysts for water treatment, but the rational design of hydrogel-based catalysts with good stability has been a great challenge. To increase the stability and activity of polymer-based Fenton catalysts, uniform urchin-like α-Fe_2O_3 was grown in situ in a PVA carrier matrix here. PVA molecules promoted the growth of urchin-like α-Fe_2O_3, and then the PVA hydrogel acted as a barrier and carrier to reduce agglomeration. Through coordination by hydroxyl groups,PVA had good combination with Fe ions and α-Fe_2O_3. The formation of Fe–O–C bonds between iron oxides and polymers was reported for the first time, enhancing the material stability during catalysis. Under higher PVA concentrations, the resulting composite hydrogel could generate more ˙OH due to the increase in the number of active sites because of the hairy urchin-like structure. In tetracycline degradation through a heterogeneous Fenton reaction, the resulting material had good catalytic activity from pH 2 to pH 10 with low iron leaching, good reusability and remained at a level of nearly 90%after five consecutive cycles. Density functional theory calculations were used to further prove the mechanism of structural change of the iron oxides. The HOMO and LUMO energies of the iron oxides changed from 5.428 and 4.899 eV to 5.926 and 5.310 eV,indicating that the presence of PVA could influence the charge of the iron atom. The results provide new insights into the preparation of polymer hydrogel-based heterogeneous Fenton catalysts with enhanced stability for water treatment.     

氯化石蜡产品中短链和中链同系物的指纹分布

使用气相色谱-电子捕获负化学电离质谱（GC-ECNI-MS）,对包含CP-42、CP-52和CP-70三种常见氯含量的22个CPs产品进行了测定,分析了不同氯含量的CPs产品中短链氯化石蜡（SCCPs）和中链氯化石蜡（MCCPs）同系物的分布模式.SCCPs同系物呈现5种分布特征,分别是CP-42型、三类CP-52型和CP-70型,MCCPs同系物呈现4种分布特征,分别是CP-42型和三类CP-52型,CP-70产品中MCCPs同系物未呈现出一致的分布规律.CPs生产原料石蜡中烷烃的成分组成和CPs生产工艺的不同,是造成产品同系物分布模式不一致的原因.通过统计学分析,得到CPs产品中SCCPs和MCCPs同系物的指纹分布,这是开展环境中CPs的源解析、迁移转化、归趋和毒性风险评价等研究的有利工具.     

Highly catalytic activity of Mn/SBA-15 catalysts for toluene combustion improved by adjusting the morphology of supports

Rod-like, hexagonal and fiber-like SBA-15 mesoporous silicas were synthesized to support MnO_x for toluene oxidation. This study showed that the morphology of the supports greatly influenced the catalytic activity in toluene oxidation. MnO_x supported on rod-like SBA-15(R-SBA-15) displayed the best catalytic activity and the conversion at 230°C reached more than 90%, which was higher than the other two catalysts. MnO_x species consisted of coexisting MnO_2 and Mn_2O_3 on the three kinds of SBA-15 samples. Large amounts of Mn_2O_3 species were formed on the surface and high oxygen mobility was obtained on MnO_x supported on R-SBA-15, according to the H_2 temperature programmed reduction(H_2-TPR)and X-ray photoelectron spectroscopy(XPS) results. The Mn/R-SBA-15 catalyst with greater amounts of Mn_2O_3 species possessed a large amount of surface lattice oxygen, which accelerated the catalytic reaction rate. Therefore, the surface lattice oxygen and high oxygen mobility were critical factors on the catalytic activity of the Mn/R-SBA-15 catalyst.     

One-step synthesis of Cu(II) metal–organic gel as recyclable material for rapid, efficient and size selective cationic dyes adsorption

Efficient removal of non-biodegradable and hazardous dyes from wastewater remains a hot research topic. Herein, a rationally designed a Cu(Ⅱ)-based metal–organic gel(Cu-MOG) with a nanoporous 3 D network structure prepared via a simple one-step mixing method was successfully employed for the removal of cationic dyes. The Cu-MOG exhibited high efficiency, with an adsorption capacity of up to 650.32 mg/g, and rapid adsorption efficiency, with the ability to adsorb 80% of Neutral Red within 1 min. The high adsorption efficiency was attributed to its large specific surface area, which enabled it to massively bind cationic dyes through electrostatic interaction, and a nanoporous structure that promoted intra-pore diffusion. Remarkably, the Cu-MOG displayed size-selective adsorption, based on adsorption studies concerning dyes of different sizes as calculated by density functional theory. Additionally, the adsorption performance of the Cu-MOG still maintained removal efficiency of 100% after three regeneration cycles. These results suggested that the Cu-MOG could be expected to be a promising and competitive candidate to conveniently process wastewater.