Nitrogen critical loads and management alternatives for N-impacted ecosystems in California

Empirical critical loads for N deposition effects and maps showing areas projected to be in exceedance of the critical load (CL) are given for seven major vegetation types in California. Thirty-five percent of the land area for these vegetation types (99,639 km²) is estimated to be in excess of the N CL. Low CL values (3–8 kg N ha^?1 yr^?1) were determined for mixed conifer forests, chaparral and oak woodlands due to highly N-sensitive biota (lichens) and N-poor or low biomass vegetation in the case of coastal sage scrub (CSS), annual grassland, and desert scrub vegetation. At these N deposition critical loads the latter three ecosystem types are at risk of major vegetation type change because N enrichment favors invasion by exotic annual grasses. Fifty-four and forty-four percent of the area for CSS and grasslands are in exceedance of the CL for invasive grasses, while 53 and 41% of the chaparral and oak woodland areas are in exceedance of the CL for impacts on epiphytic lichen communities. Approximately 30% of the desert (based on invasive grasses and increased fire risk) and mixed conifer forest (based on lichen community changes) areas are in exceedance of the CL. These ecosystems are generally located further from emissions sources than many grasslands or CSS areas. By comparison, only 3–15% of the forested and chaparral land areas are estimated to be in exceedance of the NO₃^? leaching CL. The CL for incipient N saturation in mixed conifer forest catchments was 17 kg N ha^?1 yr^?1. In 10% of the CL exceedance areas for all seven vegetation types combined, the CL is exceeded by at least 10 kg N ha^?1 yr^?1, and in 27% of the exceedance areas the CL is exceeded by at least 5 kg N ha^?1 yr^?1. Management strategies for mitigating the effects of excess N are based on reducing N emissions and reducing site N capital through approaches such as biomass removal and prescribed fire or control of invasive grasses by mowing, selective herbicides, weeding or domestic animal grazing. Ultimately, decreases in N deposition are needed for long-term ecosystem protection and sustainability, and this is the only strategy that will protect epiphytic lichen communities.     

两种有机锌络合物处理棉花的霉变及热解行为研究

棉花是纺织业的重要原料,是人民群众生活不可或缺的必需品,同时也是我国进出口重要的商品。研究如何安全有效地进行棉花的储备具有十分重要的现实意义。棉纤维本身含有脂肪、蜡质和果胶等适合微生物生长繁殖的营养物质。在棉花储备中,高的回潮率会加速微生物的繁殖,进而产生热量。热量的累积会引起温度升高以及棉花霉变,不利于棉花的安全有效储存。因此,通过静电吸附法将安全无毒的有机锌络合物附着在棉纤维表面,研究表明,相同条件下,处理棉的霉变状况明显得到抑制。加速发霉条件下,未处理棉的相对于白纸的平均色差值为28.10,而双乙酸锌以及苯甲酸锌防霉处理棉的色差值分别为5.16和5.86,下降了81.6%和79.1%。自然发霉条件下,双乙酸锌以及苯甲酸锌防霉处理棉的色差值分别下降了53.8%和50.7%。同时研究了纯棉以及处理棉氮气下的热分解动力学,相比于未处理棉,双乙酸锌防霉处理后活化能下降了15.8%,而苯甲酸锌防霉处理后活化能下降了10.9%。此外,利用实时红外和热重红外联用技术得到了样品在热解过程中固相以及气相的裂解产物的红外谱图,发现防霉处理能一定程度上抑制棉花热解。     

Arbuscular mycorrhizal fungus-induced decrease in nitrogen concentration in pore water and nitrogen leaching loss from red soil under simulated heavy rainfall

Environmental Science and Pollution Research - Arbuscular mycorrhizal fungus (AMF) is generally colonized in plant roots and influences the migration of mineral elements such as nitrogen (N) in...     

Impact of pyrolysis temperature and activation on oily sludge-derived char for Pb(II) and Cd(II) removal from aqueous solution

Environmental Science and Pollution Research - This study investigated the Pb(II) and Cd(II) sorption from aqueous solution by oily sludge-derived char (OSDC) prepared at different pyrolysis...     

Research on the effects of diesel engine exhaust transport distance on particulate microstructure

This study aims to reveal the evolutionary process of particles during the diesel exhaust transport process and to further understand the effects of diesel exhaust transport distance (D_ET) on a particulate microstructure. Specifically, the micromorphological, particle size distribution, and aggregate characteristics of particles as well as the variation of the structural characteristics of elementary carbon particles (ECPs) as D_ET changed were examined using an engine exhaust particle size spectrometer, a high-resolution transmission electron microscopy system, and a small-angle X-ray scattering system. The results show the following: As D_ET increased, the chains gradually lengthened, the extent of accumulation and stacking increased, and a number of clusters gradually rose. The average particle diameter increased from 23.1 nm at 0 m to 92.7 nm at 3 m. In addition, as D_ET increased, the number of accumulation-mode particles, the number of folded, curved carbon layers in the inner core of carbon particles, and the disorderliness of carbon layers in the outer shell of carbon particles all increased. Moreover, the boundary between the inner core and the outer shell became increasingly obscure. As D_ET increased, there was a gradual decrease in the difference in electron density between particles, and the fractal dimensionality of the distribution, average cross-sectional size, radius of gyration, and axial length of pores were, respectively, 33.3%, 40%, 38.2%, and 50.3% less at 3 m than at 0 m. Besides that, the number of small (< 3 nm) pores gradually increased, and the number of large (> 10 nm) pores gradually decreased. Overall, as D_ET increased, pore size and number decreased. There was a gradual increase in the number of folded and curved carbon layers in the inner core of ECPs and an increase in the disorderliness of carbon layers in their outer shell as D_ET increased. Furthermore, the boundary between the inner core and the outer shell became increasingly obscure as D_ET increased. The crystallite size of ECPs decreased from 1.365 nm at 0 m to 1.098 nm at 3 m. This suggests that the number of continuously arranged carbon atoms decreased, the arrangement of carbon atoms was more disorderly, and the degree of graphitization decreased. As D_ET increased, there was a gradual increase in the interlayer spacing and curvature of ECPs. This suggests that increasing D_ET led to a more disorderly distribution of electron orbitals inside the carbon layers, less electron resonance stability in the carbon layers, greater oxidative activity of ECPs, and greater inherent oxidative capacity of particles.