Multiple kinetic Langmuir modeling to predict the environmental behaviour of As(v) in soils

A soil with a relatively high Fe content (2.82% [w/w]) was loaded for up to one year with As(v) by equilibrating it with a solution containing 1000 mg l(-1) As(v) at a soil mass-to-solution ratio of 0.1 kg l(-1). The incorporation of As(v) into the soil and its distribution over the soil phases were monitored by sampling at strategic time intervals using an operationally defined five-step sequential extraction procedure (Wenzel et al., Anal. Chim. Acta, 2001, 436, 309) and subsequent As measurement. A multiple kinetic Langmuir model was developed to retrieve the dynamic parameters (adsorption and desorption rate constants, capacities and Langmuir equilibrium constants) for each of the soil phases by numerical fitting of the experimental adsorption data to the model. Under the equilibration conditions used the adsorption rate constants for all five operationally defined soil phases were very similar but the desorption rate constants decreased by a factor of ca. 150 from soil phase 1 (non-specifically sorbed As) to 5 (residual phases). This implies that As(v) incorporation "deeper" into the soil leads to stronger binding which is associated with the Langmuir equilibrium constants (adsorption rate constants/desorption rate constants). Equilibration of the soil with As(v) was complete in ca. 10 days with As(v) predominantly bound to soil phase 2 (specifically sorbed As) and soil phase 3 (amorphous and poorly crystalline hydrous oxides). X-Ray absorption spectroscopy techniques revealed that these binding characteristics may be related to adsorption of As(v) on Si- and/or Al-containing structures and natural hydrous iron oxide (HFO) surface sites, respectively. Since the model is independent of the initial As(v) concentration in the solution and the soil mass-to-solution ratio, the behaviour of the thus characterized soil-As(v) system can be predicted for a range of conditions. Simulations showed that in an accidental As(v) spill the soil studied would actively scavenge As(v) by instantaneous adsorption onto all soil phases followed by redistribution of As(v) from weaker binding sites to stronger ones over time.     

Gasification of dried sewage sludge: status of the demonstration and the pilot plant

The disposal of sewage sludge from municipal waste water treatment plants is suffering from raising costs.The gasification is an alternative way of treatment, which can reduce the amount of solid residues that must be disposed from a water treatment plant. The produced gas can be used very flexible to produce electrical energy, to burn it very cleanly or to use it for upgrading.The gasification in the fluidised bed and the gas cleaning with the granular bed filter has shown successful operation. A demonstration plant in Balingen was set up in 2002 and rebuilt to a larger throughput in 2010. As a next step a demonstration plant was built in Mannheim and is now at the end of the commissioning phase. Nowadays the product gas is blended with biogas from sludge fermentation and utilized in a gas engine or combustion chamber to produce heat. In the future the process control for a maximized efficiency and the removal of organic and inorganic impurities in the gas will be further improved.     

Impact of mineral components and selected trace metals on ambient PM10 concentrations

PM10 levels of the mineral components Si, Al, Fe, Ca, Mg and some trace metals were measured at three different sites in the urban area of Vienna (Austria). Observed trace metal concentrations varied between less than 0.1 ng m^?3 (Cd) and approximately 200 ng m^?3 (Zn), mineral components showed enhanced concentrations ranging from 0.01 μg m^?3 (Ca) to 16.3 μg m^?3 (Si). The contribution of the respective mineral oxides to PM10 mass concentrations accounted on average for 26.4 ± 16% (n = 1090) of the PM10 mass, with enhanced rates in spring and autumn (monthly averages of up to 40%) and decreased contributions in the cold season (monthly averages below 10%). The atmospheric occurrence of Al, Ti and Sr could be assigned to crustal sources, whereas for the elements Ba, Ca, Fe, Mg, Mn and V an increased contribution of non-crustal origin was observed. PM10 levels of As, Cd, Co, Cr, Cu, Ni, Pb, Sb, Sn and Zn were predominantly derived from man-made emissions. Intersite comparison indicated that urban PM10 mass concentrations and PM10 levels of As, Pb and Zn were predominantly influenced from the transport of aerosols from outside into the city, whereas for the elements Ba, Mg, Ca, Cu and Fe a distinctly increased impact of local emissions was observed. The contribution of these urban emissions to total PM10 concentrations was estimated by calculating the so-called “urban impact”, which was found to be 32.7 ± 18% (n = 392) in the case of PM10 mass concentrations. The investigated elements accounted on average for 31.3 ± 19% (n = 392) of the observed PM10 mass increase. The mean values for the “urban impacts” of individual elements varied between 25.5% (As) and 77.0% (Ba).     

Enrichment of fetal nucleated cells from maternal blood: Model test system using cord blood

The presence of small numbers of fetal nucleated red cells in the maternal circulation has been a stimulus for the development of technologies for non-invasive prenatal genetic analysis. Our laboratory has been assessing the feasibility of density gradient centrifugation followed by magnetic activated cell sorting (MACS) of cells expressing CD32 and CD45, to deplete maternal nucleated blood cells. We have examined the efficiency of each of the steps of this procedure using cord blood from term pregnancies as a source of nucleated red blood cells. Cord blood was shown to contain highly variable numbers of nucleated red cells. Three different density gradients were examined. There was no major difference in the performances of the double and triple gradients. Density gradient centrifugation resulted in enrichments of nucleated red blood cells of about 1000-fold relative to the total cell count. However, it was apparent that the selection of the cell layers which were most enriched for these cells would result in significant losses of nucleated red cells in other layers. MACS sorting of cells using CD45 resulted in white cell depletions ranging from 7 to 34-fold. These data provide a foundation for comparison with other methods and for optimization of the MACS technique.     

Biochemical composition of Nyctiphanes australis and its possible use as an aquaculture feed source: Lipids,pigments and fluoride content

Nyctiphanes australis contained, on a dry weight basis, an average of 52% crude protein and 5.0 to 9.5% lipid. The fatty acid profile of N. australis was markedly unsaturated, with a mean total 3 fatty acid content of 48.6±2.4% of total fatty acids. N. australis contained high levels of the essential long-chain polyunsaturated fatty acids eicosapentaenoic (EPA, 20:53) and docosahexaencic (DHA, 22:63), ranging from 16.6 to 36.5% and 11.1 to 24.8%, respectively. The concentration of total carotenoids ranged from 137 to 302 g g^–1 dry wt, with no significant differences in concentrations found with season or life stage. The carotenoids were comprised of 79.5% astaxanthin and 20.5% canthaxanthin. The lipid and pigment compositions of N. australis suggest that the species could serve as a suitable feed source for cultured salmonids. Like other euphausiids, N. australis contained high levels of fluoride, with a seasonal range between 277 and 3507 g g^–1 dry wt. The high fluoride levels found in N. australis would not detract from its potential as a feed source for salmonids because ingested fluoride is largely absorbed by the skeleton.     

Bestimmung von Nitrodiphenylaminen und verwandten Verbindungen im Sickerwasser einer Rüstungsaltlast

Goal, Scope and Background

Nitrodiphenylamines can be found at abandoned military sites where the explosive 2,2′,4,4′,6,6′-hexanitrodiphenylamine (hexyl) or diphenylamine as a stabilizer of smokeless powder was handled. Aim of the present study is the development of HPLC methods for the analysis of contaminants which can be expected in particular under aerobic conditions at premises which are contaminated by nitrodiphenyl-amines and related compounds.

Methods

A list of 13 compounds which can be expected at these explosives factories was deduced from literature studies. HPLC methods were developed for the analytes. Water samples from the unsaturated zone of a former hexyl-producing factory were collected by suction cups and the material was analysed according to these procedures to demonstrate the practicability of the new methods and to verify the existence of the postulated compounds in the environment of the former nitration plant.

Results and Conclusion

The new HPLC methods are suitable for the exploration of sites contaminated by nitrodiphenylamines. Beside some hexyl its intermediates 1-chloro-2,4-dinitrobenzene, 2,4-dinitrodiphenylamine und 2,2′,4,4′-tetranitrodiphenylamine were identified in the leachate water.

Recommendation and Perspective

It is advisable to include at least these 4 compounds in the examination of former hexyl-producing plants. Several unknown peaks were observed in the HPLC-chromatogram. It is recommendable to perform further investigations of the unidentified compounds to compile a final list of analytes for military sites polluted by nitrodiphenylamines.     

Amorphous and condensed organic matter domains: the effect of persulfate oxidation on the composition of soil/sediment organic matter

The composition of amorphous and condensed soil/sediment organic matter (SOM) domains was investigated for one soil sample and four sediment samples. These samples were oxidized with persulfate to remove amorphous SOM, before and after which the composition of SOM was studied by thermogravimetric analysis, pyrolysis-GC/MS, and cross polarization magic angle spinning 13C-NMR. Comparison of the SOM composition before and after oxidation showed that condensed SOM was more thermostable and less polar than amorphous SOM. Condensed SOM was relatively low in O-alkyl C and carboxyl C and it was likely to contain only small amounts of labile organic components (carbohydrates, peptides, fatty acids). Apart from these general characteristics, the composition of the condensed and amorphous domains appeared to be highly dependent on the origin and nature of the SOM investigated. Condensed domains in relatively undecomposed SOM were enriched in aliphatic C, whereas condensed domains in relatively weathered SOM were enriched in aromatic C. Altogether, the compositional changes upon persulfate oxidation were similar to the compositional changes upon humification, which supports the idea that weathered SOM is more condensed than the original material.     

The relationship between elimination rates and partition coefficients

Rate constants for uptake and elimination of chemicals in organisms are often related to partition coefficients (typically the octanol-water partition coefficient). We show that the well-mixed one-compartment model for toxico-kinetics implies that the elimination rate is inversely proportional to the square root of the partition coefficient. When chemical exchange is limited by diffusion in the boundary layers adjacent to the interface, two-film models are appropriate, which have more complex implications for the relationships between the exchange rates and the partition coefficient. We also show that the popular steady-flux approximation of the two-film model is not a conceptual generalization of the one-compartment model, although it shares the first-order kinetics. We compare the kinetics of a series of models with an increasing number of well-mixed compartments for exchange, such that the two-film model results for an infinite number of compartments. The latter model formulation in terms of partial differential equations, and more in particular its boundary condition at the interface of the two media, is believed to be new. In the steady-flux approximation and in the model with single well-mixed boundary layers and low diffusivities, the elimination rate depends hyperbolically on the partition coefficient. The available data for abiotic systems (SPME fibers) supports a hyperbolic relationship, whereas the data for aquatic biota are less discriminating between a hyperbolic or a square root relationship with the partition coefficient. The daphnia data showed less scatter than the fish data, possibly due to the small variance in body sizes, since elimination rates are inversely proportional to body length. The square root relationship fitted these data best.