Evaluation of non-point source pollution reduction by applying Best Management Practices using a SWAT model and QuickBird high resolution satellite imagery

This study evaluated the reduction e ect of non-point source pollution by applying best management practices (BMPs) to a 1.21 km2 small agricultural watershed using a SWAT (Soil andWater Assessment Tool) model. Two meter QuickBird land use data were prepared for the watershed. The SWAT was calibrated and validated using daily streamflow and monthly water quality (total phosphorus (TP), total nitrogen (TN), and suspended solids (SS)) records from 1999 to 2000 and from 2001 to 2002. The average Nash and Sutcli e model e ciency was 0.63 for the streamflow and the coe cients of determination were 0.88, 0.72, and 0.68 for SS, TN, and TP, respectively. Four BMP scenarios viz. the application of vegetation filter strip and riparian bu er system, the regulation of Universal Soil Loss Equation P factor, and the fertilizing control amount for crops were applied and analyzed.     

Effects of a dynamic membrane formed with polyethylene glycol on the ultrafiltration of natural organic matter

The formation of a dynamic membrane (DM) was investigated using polyethylene glycol (PEG) (molecular weight of 35000 g/mol, concentration of 1 g/L). Two natural organic matters (NOM), Dongbok Lake NOM (DLNOM) and Suwannee River NOM (SRNOM) were used in the ultrafiltration experiments along with PEG. To evaluate the effects of the DM with PEG on ultrafiltration, various transport experiments were conducted, and the analyses of the NOM in the membrane feed and permeate were performed using high performance size exclusion chromatography, and the effective pore size distribution (effective PSD) and effective molecular weight cut off (effective MWCO) were determined. The advantages of DM formed with PEG can be summarized as follows: (1) PEG interferes with NOM transmission through the ultrafiltration membrane pores by increasing the retention coefficient of NOM in UF membranes, and (2) low removal of NOM by the DM is affected by external factors, such as pressure increases during UF membrane filtration, which decreases the effective PSD and effective MWCO of UF membranes. However, a disadvantage of the DM with PEG was severe flux decline; thus, one must be mindful of both the positive and negative influences of the DM when optimizing the UF performance of the membrane.     

Cytotoxicity, genotoxicity and ecotoxicity assay using human cell and environmental species for the screening of the risk from pollutant exposure

For the screening of the risk from environmental contamination, the cytotoxic/genotoxic effects of various model pollutants were determined using an in vivo system comprised of human HeLa cells; the ecotoxicity was also determined using the acute and genotoxicity tests on two aquatic sentinel species widely used in biomonitoring, namely, freshwater crustacean, Daphnia magna and larva of aquatic midge, Chironomus tentans. Nonylphenol (NP), bisphenol A (BPA), bis(2-ethylhexyl) phthalate (DEPH) and paraquat dichloride (PQ) were used as the model pollutants. The results showed that exposure of HeLa cells to NP, BPA and DEHP was sufficient for the expression of noticeable genotoxic and cytotoxic effects. Ecotoxicity results showed that, as expected, D. magna was more sensitive than C. tentans to chemical exposure. BPA may exert a genotoxic effect on D. magna and C. tentans, given that DNA strand breaks increased in both species exposed to this compound, whereas NP-induced DNA damage occurred only in C. tentans. In vivo genotoxic data obtained in aquatic sentinel species could provide valuable information for freshwater quality monitoring. From the results of the present study, the use of cytotoxic, genotoxic and ecotoxic tests using human cell system, as well as, biomonitoring species, seems to be relevant for preliminary evaluation of the human health and ecological effects of pollutants and thus, a promising screening tool for environmental monitoring and risk assessment.     

Transfer of 90Sr to rice plants after its acute deposition onto flooded paddy soils

The transfer of 90Sr to rice plants following its acute ground deposition was examined experimentally in a greenhouse. Lysimeters were flooded after being filled with the soil monoliths from 12 paddy fields. A solution of 90Sr was applied to the standing water in the flooded lysimeters at the pre-transplanting stage or booting stage. Applied 90Sr was mixed with the topsoil only after the pre-transplanting application (PTA). The transfer was quantified with the areal transfer factor (TF(a), m2 kg(-1)-dry) defined as the ratio of the plant concentration to the initial ground deposition. In the PTA, the first-year TF(a) values in the 12 soils were in the range of 8.2 x 10(-3) -2.1 x 10(-2) and 1.7 x 10(-4) -3.6 x 10(-4) for the straws and hulled seeds, respectively. The TF(a) values from the booting-stage application (BSA) were higher than those from the PTA by a factor of up to four. The ratios of the seed TF(a) to the straw TF(a) were, on the whole, higher in the BSA. The 90Sr TF(a) in the PTA was negatively correlated with the soil pH and, to a lesser degree, the exchangeable Ca content. In the second year, the TF(a) in the PTA reduced to 53-90% of that in the first year. A more significant reduction, in general, occurred in a sandier soil. Based on the four consecutive years' transfer data, an overall half-time of the 90Sr TF(a) was estimated to be 2.2 years.     

Effects of humic acid on phytodegradation of petroleum hydrocarbons in soil simultaneously contaminated with heavy metals

Effects of humic acid on phytoremediation of petroleum hydrocarbons in soil simultaneously contaminated with heavy metals were evaluated.     

Removal of arsenate and arsenite from aqueous solution by waste cast iron

The removal of As(III) and As(V) from aqueous solution was investigated using waste cast iron, which is a byproduct of the iron casting process in foundries. Two types of waste cast iron were used in the experiment: grind precipitate dust (GPD) and cast iron shot (CIS). The X-ray diffraction analysis indicated the presence of Fe0 on GPD and CIS. Batch experiments were performed under different concentrations of As(III) and As(V) and at various initial pH levels. Results showed that waste cast iron was effective in the removal of arsenic. The adsorption isotherm study indicated that the Langmuir isotherm was better than the Freundlich isotherm at describing the experimental result. In the adsorption of both As(III) and As(V), the adsorption capacity of GPD was greater than CIS, mainly due to the fact that GPD had higher surface area and weight percent of Fe than CIS. Results also indicated the removal of As(III) and As(V) by GPD and CIS was influenced by the initial solution pH, generally decreasing with increasing pH from 3.0 to 10.5. In addition, both GPD and CIS were more effective at the removal of As(III) than As(V) under given experimental conditions. This study demonstrates that waste cast iron has potential as a reactive material to treat wastewater and groundwater containing arsenic.     

The impact of size-segregated particle properties on daily mortality in Seoul,Korea

Environmental Science and Pollution Research - To investigate the causative component for certain health outcomes, the associations between the properties of ambient particles and cause-specific...     

Potential Impacts of Climate Change on the Reliability of Water and Hydropower Supply from a Multipurpose Dam in South Korea

Future climate change is a source of growing concerns for the supply of energy and resources, and it may have significant impacts on industry and the economy. Major effects are likely to arise from changes to the freshwater resources system, due to the connection of energy generation to these water systems. Using future climate data downscaled by a stochastic weather generator, this study investigates the potential impacts of climate change on long‐term reservoir operations at the Chungju multipurpose dam in South Korea, specifically considering the reliability of the supply of water and hydropower. A reservoir model, Hydrologic Engineering Center‐Reservoir System Simulation (HEC‐ResSim), was used to simulate the ability of the dam to supply water and hydropower under different conditions. The hydrologic model Soil and Water Assessment Tool was used to determine the HEC‐ResSim boundary conditions, including daily dam inflow from the 6,642 km² watershed into the 2.75 Gm³ capacity reservoir. Projections of the future climate indicate that temperature and precipitation during 2070‐2099 (2080s) show an increase of +4.1°C and 19.4%, respectively, based on the baseline (1990‐2009). The results from the models suggest that, in the 2080s, the average annual water supply and hydropower production would change by +19.8 to +56.5% and by +33.9 to 92.3%, respectively. Model simulations suggest that under the new climatic conditions, the reliability of water and hydropower supply would be generally improved, as a consequence of increased dam inflow.     

Stabilization of lead and copper contaminated firing range soil using calcined oyster shells and fly ash

A stabilization/solidification treatment scheme was devised to stabilize Pb and Cu contaminated soil from a firing range using renewable waste resources as additives, namely waste oyster shells (WOS) and fly ash (FA). The WOS, serving as the primary stabilizing agent, was pre-treated at a high temperature to activate quicklime from calcite. Class C FA was used as a secondary additive along with the calcined oyster shells (COS). The effectiveness of the treatment was evaluated by means of the toxicity characteristic leaching procedure (TCLP) and the 0.1 M HCl extraction tests following a curing period of 28 days. The combined treatment with 10 wt% COS and 5 wt% FA cause a significant reduction in Pb (>98 %) and Cu (>96 %) leachability which was indicated by the results from both extraction tests (TCLP and 0.1 M HCl). Scanning electron microscopy–energy dispersive X-ray spectroscopy (SEM–EDX) analyses are used to investigate the mechanism responsible for Pb and Cu stabilization. SEM–EDX results indicate that effective Pb and Cu immobilization using the combined COS–FA treatment is most probably associated with ettringite and pozzolanic reaction products. The treatment results suggest that the combined COS–FA treatment is a cost effective method for the stabilization of firing range soil.