Assessment of the Streptomyces-plant system to mitigate the impact of Cr(VI) and lindane in experimental soils

Environmental Science and Pollution Research - Phytoremediation techniques have been proposed as ecological methods to clean up contaminated sites. This study is aimed to evaluate the effect of the...     

Presence, biotransformation and effects of sulfophenylcarboxylic acids in the benthic fish Solea senegalensis

The presence of linear alkylbenzene sulfonates (LAS) and their degradation intermediates, sulfophenylcarboxylic acids (SPCs), with concentrations up to 100 ppb has been found in surface waters taken from the estuary of the river Guadalete (Cádiz, SW of Spain). Higher concentrations were found at the sampling site located adjacent to the discharge outlet of a wastewater treatment plant (WWTP). The concentrations decreased downstream to a few ppb as a result of dilution, sorption, and degradation processes, which were taking place along the estuary. Once the presence of both xenobiotics was confirmed in the environment, an in vivo assay was conducted to study their biotransformation and effects in the benthic fish Solea senegalensis. A flow-through system was employed, consisting of an exposure phase (120 h) with environmental levels of the surfactant (200, 500 and 800 microg/L of 2?C(10)LAS), followed by a depuration stage (72 h). The generation of SPCs has been quantified during these phases in both water and fish, with LAS biotransformation shown in all cases. The antioxidant enzymes catalase (CAT), glutathione peroxidase (GPX), glutathione reductase (GR), the phase II enzyme glutathione S-transferase (GST), and the phase III acid and alkaline phosphatases (AcP, ALP) were also estimated and utilized as biomarkers.     

Zinc removal from synthetic waters using magnetite/graphene oxide composites

The removal of heavy metals from wastewater has become a global challenge, which demands the continuous study of efficient and low-cost treatment alternatives such as adsorption. In this research, the removal of zinc was evaluated using batch adsorption processes with nonconventional materials such as graphene oxide (GO), magnetite (MG), and their composites (GO:MG), formulated with three weight ratios (2:1, 1:1, and 1:2). Graphene was synthesized by the modified Marcano method, using pencil lead graphite as a precursor. MG and the composites were synthesized by chemical coprecipitation of ferrous sulfate and ferric chloride. The materials were characterized by Raman and Fourier transform infrared spectroscopies, scanning electron microscopy, X-ray diffraction, and the Brunauer–Emmett–Teller method to determine the functional groups, microstructural and morphological characteristics, and specific surface area. Batch adsorption tests were carried out to optimize the adsorbent dose and contact time with zinc solutions of 10 ppm. Zinc adsorption reached equilibrium at 2 h, with an optimal dose between 0.25 and 1.0 g/L. The maximum zinc removal efficiencies/adsorption capacities were 98.6%/165.6, 83.4%/47.6, 83.5%/21.9, 72.8%/19.9, and 82.2%/9.25 mg/g using GO, 2GO:1MG, 1GO:1MG, 1GO:2MG, and MG, respectively. Furthermore, the analysis of the isotherm and adsorption kinetics models determined that the adsorption processes using MG and the composites fit the Sips and pseudo-second-order models.     

Application of life cycle assessment of system solution scenarios for municipal solid waste management in Turkey

Journal of Material Cycles and Waste Management - In this study, an average waste composition was determined using the Provincial Environmental Status Reports of 81 provinces in Turkey for 2019,...     

Effects of the forced ventilation on composting of a solid olive-mill by-product ("alperujo") managed by mechanical turning

The evaluation of the most suitable aeration technology for olive-mill by-product "alperujo" (AL) composting was carried out by using two identical piles prepared by mixing AL with a bulking agent (fresh cow bedding) and a mature compost (as inoculant). Forced ventilation was employed in conjunction with mechanical turning in one of the piles, whereas only mechanical turning was used in the other pile. These two treatment methods were evaluated by assessing process efficiency and end-product quality. The results show that the composting process was completed in less time when forced ventilation was coupled with mechanical turning. A slight delay in the evolution of pH, C/N ratio, and biodegradation of fats and organic matter was observed when only turning was employed. However, the recommended method for composting AL was mechanical turning without forced ventilation since the composition of the end-product in this case was comparable to the composted AL using forced ventilation coupled with mechanical turning. Furthermore, there were substantial economic savings by selecting mechanical turning alone, which included capital costs for equipment.     

Modelling Phosphorus Retention in Lakes and Reservoirs

Steady-state models for the prediction of P retention coefficient (R) in lakes were evaluated using data from 93 natural lakes and 119 reservoirs situated in the temperate zone. Most of the already existing models predicted R relatively successfully in lakes while it was seriously under-estimated in reservoirs. A statistical analysis indicated the main causes of differences in R between lakes and reservoirs: (a) distinct relationships between P sedimentation coefficient, depth, and water residence time; (b) existence of significant inflow–outflow P concentration gradients in reservoirs. Two new models of different complexity were developed for estimating R in reservoirs: , where τ is water residence time (year), was derived from the Vollenweider/Larsen and Mercier model by adding a calibrated parameter accounting for spatial P non-homogeneity in the water body, and is applicable for reservoirs but not lakes, and , where [P_in] is volume-weighted P concentration in all inputs to the water body (μg l⁻¹), was obtained by re-calibrating the OECD general equation, and is generally applicable for both lakes and reservoirs. These optimised models yield unbiased estimates over a large range of reservoir types.     

Effect of Cadmium on Microbial Activity and a Ryegrass Crop in Two Semiarid Soils

Soil pollution with Cd is an environmental problem common in the world, and it is necessary to establish what Cd concentrations in soil could be dangerous to its fertility from toxicity effects and the risk of transference of this element to plants and other organisms of the food chain. In this study, we assessed Cd toxicity on soil microorganisms and plants in two semiarid soils (uncultivated and cultivated). Soil ATP content, dehydrogenase activity, and plant growth were measured in the two soils spiked with concentrations ranging from 3 to 8000 mg Cd/kg soil and incubated for 3 h, 20 days, and 60 days. The Cd concentrations that produced 5%; 10%;, and 50%; inhibition of each of the two soil microbiological parameter studied (ecological dose, ED, values) were calculated using two different mathematical models. Also, the effect of Cd concentration on plant growth of ryegrass (Lolium perenne, L.) was studied in the two soils. The Cd ED values calculated for soil dehydrogenase activity and ATP content were higher in the agricultural soils than in the bare soil. For ATP inhibition, higher ED values were calculated than for dehydrogenase activity inhibition. The average yields of ryegrass were reduced from 5.03 to 3.56 g in abandoned soil and from 4.21 to 1.15 g in agricultural soil with increasing concentrations of Cd in the soil. Plant growth was totally inhibited in abandoned and agricultural soils at Cd concentrations above 2000 and 5000 mg/kg soil, respectively. There was a positive correlation between the concentration of Cd in the plants and the total or DTPA-extractable concentrations of Cd in the soil.     

Spatiotemporal evolution of soil pH and zinc after the Aznalcollar mine spill

The residual pollution after the Aznalcóllar (southwestern Spain) pyrite mine spill is still a threat due to the continuing oxidation of sulfuric minerals. The objective of this paper was to analyze the combined effect of pyrite oxidation, sugar beet foam applications, and meteorological conditions on the spatiotemporal evolution of the pH and EDTA-extractable Zn concentration, using non co-located data from 11 sampling dates between June 1999 and March 2002. Median pH values ranged from 4.4 at the beginning of the monitoring period to 7.6 at the end, although values near 2.5 were observed throughout the entire period, despite of two sugar beet foam (SBF) applications. Zinc distributions were positively skewed and median concentrations ranged from 17 to 94 mg kg(-1). The inverse relationship between pH and Zn became weaker toward the end of the monitoring period as a consequence of the precipitation and posterior dissolution of newly formed minerals from the reaction products of the pyrite oxidation. Normal score maps showed that after the SBF applications only 0.5% of the monitored area was below the pH = 4 threshold, while on other dates up to one-third of the area remained below this value. The better performance of the second SBF application could be explained in terms of pyrite oxidation pathways and environmental conditions. From this analysis, with data obtained under uncontrolled field conditions, it is concluded that SBF should be applied before or during the wet and cold season to alleviate acidification, caused by the oxidation of pyrite or other sulfuric minerals.     

Larvicidal and pupicidal activities of eco-friendly phenolic lipid products from Anacardium occidentale nutshell against arbovirus vectors

Environmental Science and Pollution Research - Aedes aegypti and Culex quinquefasciatus are vectors of diseases that constitute public health problems. The discovery of products capable of...     

Simultaneous removal of metronidazole and Pb(II) from aqueous solution onto bifunctional activated carbons

Environmental Science and Pollution Research - In this work, it was analyzed the behavior of three commercial activated carbons with different textural and chemical properties to adsorb...