太湖内源营养盐负荷状况及其对上覆水水质的影响

以太湖沉积物-上覆水界面为研究对象,于2013年夏季采集46个样点的沉积物柱状样,分析表层沉积物孔隙水中营养盐(正磷酸盐、氨氮、硝氮)的浓度空间分布,估算表层沉积物中磷、氮的扩散通量,明确营养盐在沉积物-水界面的分布规律,以探明内源营养盐负荷对太湖上覆水的污染贡献,并为沉积物-水界面氮磷的转移过程理论补充证据.结果表明:太湖西北部区域的表层沉积物孔隙水中正磷酸盐和硝氮浓度较高,分别达到1.11 mg·L~(-1)和1.25 mg·L~(-1)以上;大部分湖区的氨氮浓度超过2 mg·L~(-1).全湖区范围内,从表层沉积物的上覆水到孔隙水,氨氮含量呈现升高趋势而硝氮含量呈现降低趋势.北部3个湖湾区的沉积物营养盐扩散通量最高,正磷酸盐为2.69~4.60 mg·m~(-2)·d~~(-1),氨氮为17.8~45.7 mg·m-2·d~(-1),而湖岸河口区是沉积物硝氮内源释放显著的区域.沉积物向上覆水释放正磷酸盐和氨氮的年内源污染负荷分别为64.6 t·a~(-1)和1756 t·a~(-1);而上覆水向沉积物汇入硝氮的年负荷为1102 t·a~(-1).氨氮的内源污染负荷与外源污染负荷之比高达18.7%,氨氮、总磷和总氮内源污染为上覆水贡献的浓度分别为0.361、0.013和0.134 mg·L~(-1),表明自由扩散带来的内源负荷会使太湖水中营养盐污染恶化,需引起重视.     

江苏茅山断裂带中段重力异常多尺度分析及其构造识别

采用小波变换多尺度分析,将茅山断裂带中段的重力数据分解为不同尺度的重力异常,用于研究该区的地质构造特征。小波变换多尺度分析可以将重力数据分解为不同深度的局部异常和区域异常,局部异常解释为浅部地质体引起,区域异常解释为深部地质体引起。基于此种地质解释,分析了不同深度地质体与重力异常的对应关系,并对产生异常的原因进行解释,推断出该区的主要断裂构造,并对已有研究成果进行修正。研究结果表明,断裂带中段的构造形式与重力异常之间有较好的对应关系。     

长江三角洲城市群人为热排放特征研究

基于常规可获取的能源、交通、人口等统计资料,利用“自上而下”的能源清单法,研究了2010年长江三角洲(以下简称“长三角”)城市群地区各类人为热排放量及其时空分布特征.结果表明:该地区人为热排放总量为1.4′1019J/a,其中工业、交通、建筑、新陈代谢分别占75.1%、12.5%、9.9%和2.5%.上海、苏州、无锡、杭州和南京五个城市的人为热排放总量约占研究区域总量的71%.长三角城市群的人为热年平均排放通量为5.3W/m2,大部分地区介于5~30W/m2,城市高值区一般介于20~70W/m2,上海明显高于其他城市.为方便有关环境气候模式的输入,本文提供了人为热排放的网格化空间分布和简单的时间变化廓线.     

Anoxic gas recirculation system for fouling control in anoxic membrane reactor

Anoxic gas recirculation system was applied to control the membrane fouling in pilot-scale 4-stage anoxic membrane bioreactor(MBR). In the anaerobic-anoxic-anoxic-aerobic flow scheme,hydrophilic polytetrafluoroethylene(PTFE) membrane(0.2 μm, 7.2 m2/module) was submerged in the second anoxic zone. During 8 months operation, the average flux of the membrane was 21.3L/(m2·hr). Chemical cleaning of the membrane was conducted only once with sodium hydroxide and sodium hypochlorite. Dissolved oxygen(DO) concentration in the second anoxic zone was maintained with an average of 0.19 ± 0.05 mg/L. Gas chromatography analysis showed that the headspace gas in the second anoxic reactor was mainly consisted of N2(93.0% ± 2.5%), O2(3.8% ± 0.6%), and CO2(3.0% ± 0.5%), where the saturation DO concentration in liquid phase was 1.57 mg/L. Atmospheric O2 content(20.5% ± 0.8%) was significantly reduced in the anoxic gas. The average pH in the reactor was 7.2 ± 0.4. As a result, the recirculation of the anoxic gas was successfully applied to control the membrane fouling in the anoxic MBR.     

Structural effect of the in situ generated titania on its ability to oxidize and capture the gas-phase elemental mercury

Structural effect of the in situ generated TiO(2) sorbent particle was examined for its ability to capture elemental mercury under UV irradiation in a simulated combustion flue gas. Titania particles were prepared by thermal gas-phase oxidation of Titanium (IV) isopropoxide (TTIP) using a high temperature electric furnace reactor. The structural characteristics of the in situ generated TiO(2) at various synthesis temperatures were investigated; size distribution and the geometric mean diameter were measured using a scanning mobility particle sizer, while fractal dimension and radius of gyration were evaluated from the transmission electron microscopy images. Results from the Hg(0) capture experiment show that with increasing titania synthesis temperature, the overall aggregate size increases and the morphology becomes more open-structured to gas-phase Hg(0) and UV light, resulting in the improved mercury removal capability.     

Phosphate removal and recovery with a synthetic hydrotalcite as an adsorbent

Phosphate removal is important to control eutrophication and an ion exchange process is one of several treatment processes for this purpose. Hydrotalcite compounds (HTALs) are useful as adsorbents for phosphate removal because of their ion exchange properties. In this study, the adsorption properties of a granular synthetic HTAL for phosphate and the method of regeneration of the granular HTAL were examined. The adsorption isotherm of the granular HTAL was approximated by a modified Langmuir type, and the maximum adsorption capacity was 47.3 mg P g(-1), which corresponded to the content of HTAL in the granular one. Phosphate adsorbed on the HTAL was effectively desorbed with alkaline NaCl solutions and the HTAL was regenerated with 25 w/v% MgCl(2) solution. The regenerated HTAL could be reused repeatedly for the phosphate removal. Phosphate in the exhausted desorption solution was recovered as a precipitate of calcium phosphate by addition of CaCl(2), and the residual exhausted desorption solution could be also reused after supplying NaOH. The results suggest the possibility of an effective system for phosphate removal and recovery, which includes the following processes: adsorption, desorption, recovery of phosphate, and regeneration of the HTAL and the desorption solution.     

我国地热资源的开发战略

总结了我国地热资源的利用和管理状况,提出了"政策统一、市场运作、合理利用、可持续发展"的地热资源开发战略,并对战略内容进行了具体阐述.     

Modification of Aliphatic Polyesters and Their Reactive Blends with Starch

Modified polycaprolactone was synthesized by melt reaction of PCL and reactive monomers such as glycidyl methacrylate (GMA) and maleic anhydride (MAH) in the presence of benzoyl peroxide in Brabender mixer. MAH showed a different grafting phenomenon compared to GMA. The reaction mechanism was discussed with different reactive monomers. Reactive blends of the PCL-g-GMA and the gelatinized starch with glycerin were prepared and their mechanical properties and biodegradabilities were investigated. Reactive blends of PCL-g-GMA and starch showed well-dispersed starch domain in the matrix and better mechanical strength than the unmodified PCL/starch blend. However, the reaction between PCL-g-GMA and starch induced a crosslinking during the reactive blending and this crosslinking in the blend lowered the biodegradation of the blend during the composting test. The biodegradability was investigated by the weight loss and surface morphology change of the blend in the composting medium.