Characteristics of bricks made from waste steel slag

The characteristics of bricks made from steel slag were investigated in this research. Slag addition was shown to reduce the required firing temperature. When the firing temperature was greater than 1050 degrees C and the slag addition less than 10%, the bricks met ROC national standard CNS 3319 third-class brick for builders. The percentage of slag increased as the quartz and kaolin decreased in the sintered samples while the magnesium aluminum silicate and calcium silicate increased. There were no new crystal phases observed in these samples.     

WATER BUDGET COMPUTATION FOR A SHALLOW LAKE-LAKE OKEECHOBEE,FLORIDA1

ABSTRACT: The water budget computation in shallow lakes is complicated because marsh vegetation can transpire large quantities of lake water. Thus, a model including the marsh zone evapotranspiration (WET) was developed to compute the water budget for Lake Okeechobee. Three periods of testing (1969–74), planning (1963–74), and recorded period (1952–77) were used to compare the differences of the sum of storage deviation between the WET and conventional methods (WOET). Results of the WOET method showed that the sum of stage deviations were 87.42 cm (2.868 ft.), 231.80 cm (7.605 ft.), and 284.50 cm (9.333 ft.) in the testing, planning, and recorded periods, respectively. These stage deviations are equivalent in the same order to 29, 76, and 93 percent of the lake volume. In general, the WET method not only was applicable to compute the water budget for the lake but also reduced the sum of storage deviation by about 42, 31, and 49 percent, respectively, in those three periods. The storage deviation in WET method was reduced on an average to about 2 percent each year in all three periods, and the deviations were scattered more randomly than in WOET.     

LANDSAT MID-INFRARED DATA AND GIS IN REGIONAL SURFACE SOIL-MOISTURE ASSESSMENT1

ABSTRACT: Landsat satellite Thematic Mapper (TM) data were used to assess regional soil moisture conditions. The mid-infrared (MIR) data of TM band 7 were overlain onto four principal land-use categories (Agricultural/Irrigated, Urban/Clearings, Forest/ Wetlands, Water) using a geographic information system (GIS). M data were used to assess four qualitative surface soil-moisture conditions (water/very wet, wet, moist, and dry) within each land-use category of a 208,354 ha southwestern Florida study area. The MIR response was inversely related to the qualitative surface soil-moisture content. Integration of Landsat TM MIR data with land use through GIS appears to be a useful technique for high-resolution regional soil moisture assessment, and further research to reline this technique is recommended.     

COMPARATIVE STUDY OF OPTIMIZATION TECHNIQUES FOR IRRIGATION PROJECT PLANNING1

ABSTRACT: This study presents three optimization techniques for on‐farm irrigation scheduling in irrigation project planning: namely the genetic algorithm, simulated annealing and iterative improvement methods. The three techniques are applied to planning a 394.6 ha irrigation project in the town of Delta, Utah, for optimizing economic profits, simulating water demand, and estimating the crop area percentages with specific water supply and planted area constraints. The comparative optimization results for the 394.6 ha irrigated project from the genetic algorithm, simulated annealing, and iterative improvement methods are as follows: (1) the seasonal maximum net benefits are $113,826, $111,494, and $105,444 per season, respectively; and (2) the seasonal water demands are 3.03*10³ m³, 3.0*10³ m³, and 2.92*10³ m³ per season, respectively. This study also determined the most suitable four parameters of the genetic algorithm method for the Delta irrigated project to be: (1) the number of generations equals 800, (2) population size equals 50, (3) probability of crossover equals 0.6, and (4) probability of mutation equals 0.02. Meanwhile, the most suitable three parameters of simulated annealing method for the Delta irrigated project are: (1) initial temperature equals 1,000, (2) number of moves equal 90, and (3) cooling rate equals 0.95.     

Management of sustainability transitions through planning in shrinking resource city contexts: an evaluation of Yubari City,Japan

This paper evaluates the planning competences required to enact a managed transition to sustainability at the municipal level for cities facing population, economic and employment decline. Drawing on the ‘shrinking cities’ literature, we argue consolidation of the built environment can become a focal point for sustaining citizen welfare when transitioning cities that are facing decline, especially those previously reliant on resource industries. We evaluate the former coal mining city of Yubari, Japan, which is developing a consolidated urban form with the aim of creating a ‘sustainable’ future city. Findings from interviews and content analysis of Yubari’s planning policy indicate, however, that to translate ‘shrinking’ a city into a managed transition, spatial planning must be accompanied by a wider range of social policy measures and strong cross-sectoral engagement. We also caution that the unique geographical and political context of Yubari mean its model may not be directly replicable in other contexts.     

RIDGE REGRESSION TECHNIQUES APPLIED TO LANDSAT INVESTIGATION OF WATER QUALITY IN LAKE OKEECHOBEE1

ABSTRACT: Landsat radiance values were processed at two different (single and double) levels of accuracy to estimate chlorophyll a, turbidity, and suspended sediment in Lake Okeechobee, Florida. Both ordinary least square and ridge regression analyses were used to establish a relationship between water quality parameters and Landsat radiance. Radiance measurements made at greater precision (double level) gave a better solution in this application. The ridge regression analysis for double level not only can reduce the total mean square error about 13–20 percent and confidence interval about 6–28 percent as compared to ordinary least square analysis, but it can also change the interpretation of analysis results.     

Nitrate controls methyl mercury production in a streambed bioreactor

Organic carbon bioreactors provide low-cost, passive treatment of a variety of environmental contaminants but can have undesirable side effects in some cases. This study examines the production of methyl mercury (MeHg) in a streambed bioreactor consisting of 40 m3 of wood chips and designed to treat nitrate (NO?) in an agricultural drainage ditch in southern Ontario (Avon site). The reactor provides 30 to 100% removal of NO?-N concentrations of 0.6 to 4.4 mg L(-1), but sulfate (SO?(2-)) reducing conditions develop when NO? removal is complete. Sulfate reducing conditions are known to stimulation the production of MeHg in natural wetlands. Over one seasonal cycle, effluent MeHg ranged from 0.01 to 0.76 ng L(-1) and total Hg ranged from 1.3 to 3.4 ng L(-1). During all sampling events when reducing conditions were only sufficient to promote NO?(-) reduction (or denitrification) ( = 5, late fall 2009, winter 2010), MeHg concentrations decreased in the reactor and it was a net sink for MeHg (mean flux of -5.1 μg m(-2) yr(-1)). During all sampling events when SO?(2-) reducing conditions were present ( = 6, early fall 2009, spring 2010), MeHg concentrations increased in the reactor and it was a strong source of MeHg to the stream (mean flux of 15.2 μg m(-2) yr(-1)). Total Hg was consistently removed in the reactor (10 of 11 sampling events) and was correlated to the total suspended sediment load ( r2 = 0.69), which was removed in the reactor by physical filtration. This study shows that organic carbon bioreactors can be a strong source of MeHg production when SO?(2-) reducing conditions develop; however, maintaining NO?-N concentrations > 0.5 mg L suppresses the production of MeHg.     

Predicting the contents of BTEX and MTBE for the three types of tollbooth at a highway toll station via the direct and indirect approaches

This study was set out to assess the contents of five volatile organic compounds (VOCs), including BTEX (the acronym for benzene, toluene, ethylbenzene, and xylene) and methyl tertiary-butyl ether (MTBE), in three types of tollbooth (including the car lane/ticket-collecting, car lane/cash-collecting, and bus/truck lane tollbooths) at a highway toll station via the direct and indirect approaches. For the direct approach, VOC samples were collected from the breathing zone of booth attendants at all selected tollbooths during the three workshifts. For samples collected during the dayshift, we found VOC contents of BTEX and MTBE in both the car lane/ticket-collecting (=6.23, 21.93, 3.24, 8.56, and 5.63 ppb, respectively) and car lane/cash-collecting tollbooths (=5.98, 21.71, 3.25, 8.59, and 6.04 ppb, respectively) were quite comparable, but both were significantly higher than that in the bus/truck lane tollbooth (=3.13, 13.91, 2.05, 4.52, and 2.70 ppb, respectively). The same pattern can also be found for the other two workshifts. For the indirect approach, we conducted multivariate regression analyses to predict VOC contents for any given type of tollbooth by using the four independent variables of the vehicle flowrate, wind speed, relative humidity, and air temperature. We found that, except the vehicle flowrate, the other three factors did not have a significant effect on VOC contents in the three types of tollbooth. In addition, the magnitudes of the effect of the vehicle flowrate on VOC contents for the three types of tollbooth were: car lane/cash-collecting>bus/truck lane>car lane/ticket-collecting. All regression results yielded R²-values in the range of 0.41−0.74 indicating that the developed indirect approach was able to predict VOC contents for three types of tollbooth.     

SPECTRAL ANALYSIS OF TIDAL FLUCTUATIONS IN GROUND WATER LEVEL1

ABSTRACT: Water level data at 16 ground water wells and two sea water gauging stations, coupled with barometric measurements in an alluvial plain in the central‐west region of Taiwan, are analyzed using spectral analysis in the time and frequency domains. The semi‐diurnal component from water level station is observed to be the most noticeable signal while the diurnal component is the less distinct signal recorded at the water level stations. Both semidiurnal and diurnal components are coupled with atmospheric pressure measurements. From the atmospheric pressure data, spectral analysis indicates that both the raw and the pressure adjusted water levels are almost in phase and retain the same amplitude in this area. It implies that the effect of pressure variations is not significant for the sea water and ground water level nearby; the astronomical tidal components, as expected, are the main factor causing fluctuation of ocean water and ground water levels in the Choshuihsi alluvial plain.