改革开放30年再生资源行业变迁

再生资源回收利用自建国初期就受到党和国家的高度重视,1958年周总理为其题词：“实行废品收购,变无用为有用,变一用为多用,勤俭节约,变破旧为崭新,把工农商学兵连成一片,密切协作,为全面地发展生产服务,以便更好地实现勤俭建国,改造社会的任务。”国务院专门发布了《关于加强对废弃物品收购和利用工作的指示》,把一切废弃物品广泛收集和充分利用起来,以支援国家的社会主义建设。文革期间,再生资源的回收利用受到了一定的影响。     

双负载双金属催化剂催化有机卤化物水相脱卤研究

通过把起相转移作用的聚乙二醇链固载在硅胶上（SiO2-PEG600）,再将聚乙稀吡咯烷酮（PVP）络合双金属Pd-Cu(PVP-PdCl2-CuCl2)后负载其中,制成一种新型双负载双金属水相脱卤催化剂PVP－PdCl2-CuCl2/SiO2-PEG600。以甲酸钠为氢转移试制,在水相中催化有机卤化物脱卤,研究结果表明：反应温度为800℃,Pd∶Cu=2∶1（摩尔比）,反应介质pH≈11.7左右时,该催化剂对芳香氯化物及α－氯代酮、酯具有良好的催化脱氯和重复使用性能。     

固相微萃取-气相色谱/质谱联用法测定饮用水中苯类化合物

用固相微苹取(ＳＰＭＥ)－气相色谱/质谱联用法测定饮用水中苯类化合物,以１００μｍ ＰＤＭＳ(聚二甲基硅氧烷)萃取针提取、浓缩、分离与测定九种目标化合物．萃取时间经优化选定为８ｍｉｎ,而热解析时间设定为２ｍｉｎ． 本方法的相对标准偏差小于５%,线性范围宽(２０ｎｇ·ｍｌ－１－１００００ｎｇ·ｍｌ－１),多数化合物的检测限低于５μｇ·ｌ－１．饮用水样品检测显示,样品加标回收率范围在８４%至１１０%内．     

城市污染地区与高山清洁地区新粒子生成事件特征分析

在中国复合型污染的大气环境背景下,新粒子生成(New Particle Formation,NPF)是大气颗粒物的重要来源之一,直接影响到空气质量、云物理过程、全球辐射平衡及人类的生产生活.本文通过分析城市污染地区和高山清洁地区新粒子生成天和非新粒子生成天的特征差异,研究新粒子生成事件的关键影响因素.利用2016年3月12日—4月6日北京的观测资料和2012年9月23日—10月28日黄山的观测资料,分别代表城市污染地区和高山清洁地区进行研究,同时,结合同期气态前体物浓度和气象要素进行详尽的分析.结果表明,观测期间,北京发生新粒子生成事件的频率为42.3%,黄山发生新粒子生成事件的频率为25%,北京的新粒子生成速率J₃和J₁₀、增长速率GR_3～10和GR_10～25及凝结汇分别为3.30～51.39 cm^-3·s^-1和3.37～35.21 cm^-3·s^-1、0.10～2.89 nm·h^-1和1....     

Assessment of trace element contamination in sediment cores from the Pearl River and estuary,South China: geochemical and multivariate analysis approaches

Twenty-four major and trace elements and the mineralogical composition of four sediment cores along the Pearl River and estuary were analyzed using ICP-AES, ICP-MS, and X-ray diffraction (XRD) to evaluate contamination levels. The dominant minerals were quartz, kaolinite, and illite, followed by montmorillonite and feldspars, while small amounts of halite and calcite were also observed in a few samples. Cluster analysis (CA) and principal component analysis (PCA) were performed to identify the element sources. The highest metal concentrations were found at Huangpu, primarily due to wastewater treatment plant discharge and/or the surreptitious dumping of sludge, and these data differed from those of other sources. Excluding the data from Huangpu, the PCA showed that most elements could be considered as lithogenic; few elements are the combination of lithogenic and anthropogenic sources. An antagonistic relationship between the anthropogenic source metals (K, Ba, Zn, Pb, Cd, Ag, Tl, and U) and marine source metals (Na, Mg, Ti, V, and Ca) was observed. The resulting normalized Al enrichment factor (EF) indicated very high or significant pollution of Cd, Ag, Cu, Zn, Mo, and Pb at Huangpu, which may cause serious environmental effects. Conflicting results between the PCA and EF can be attributed to the background values used, indicating that background values must be selected carefully.     

Effects of adsorption onto silica sand particles on the hydrolysis of tetracycline antibiotics

Due to high usage of tetracycline antibiotics, concerns have been raised about their environmental fate. In this study, potential changes in the pseudo-first-order hydrolysis rate constants for three tetracyclines, tetracycline (TC), oxytetracycline (OTC) and chlortetracycline (CTC), were evaluated by measuring the rate constants in batch and column leaching experiments. The first-order hydrolysis rate constants were measured at pH 5, 7, and 9 using batch tests. The values were highest at pH 7 for all three tetracyclines (0.0030 ± 0.0004, 0.0042 ± 0.0001, and 0.0323 ± 0.0003 h(-1) for TC, OTC, and CTC, respectively), indicating relatively short environmental half-lives of tetracyclines. Interestingly, it was found that the rates of degradation of the parent tetracyclines were much faster when silica sand was present in a batch solution or when the solution was passed through a silica column. For example, the ratios of the first-order degradation rate constants obtained in the column experiments to those in batch experiments were 13.2, 2.1, and 2.0 for TC, OTC, and CTC at a volumetric flow rate of 0.08 mL h(-1), with an observed tendency for this ratio to increase with an increased flow rate. This indicates that the silica surface may serve as a catalyst for hydrolysis and that the actual environmental half-lives of tetracycline antibiotics could be shorter than those estimated from laboratory hydrolysis rate constants using the standard batch protocol. Furthermore, the toxicity of the column effluent containing hydrolysis metabolites was assessed using bioluminescence inhibition in Vibrio fischeri. It was estimated that the toxicity of the metabolites of CTC was lower than that of their parent compound, whereas the toxicity of metabolites of TC and OTC was as high as or higher than that of their parent compounds.     

Biodegradation of Poly(Aspartic Acid-Itaconic Acid) Copolymers by Miscellaneous Microbes from Natural Water

Poly(aspartic acid-itaconic acid) copolymers (PAI) is a new scale inhibitor for water treatment. Thus, it is necessary to investigate its biodegradability. The biodegradability of PAI was investigated through CO₂ evolution tests under different conditions based on determination of carbon dioxide production. The investigation results showed that the degradation rate of PAI on day 10 and day 28 were respectively 38.7 and 79.5%, indicating that PAI was one kind of easily biodegradable scale inhibitors. With the increase in the content of itaconic acid in copolymerization process, the biodegradability of PAI was significantly reduced. In addition, the high biodegradability might be attributed to the existence of C–N bone-structure and more –COO–. Finally, Cu²⁺ could decrease the degradation percentage and the enzyme inhibition effect of Cu²⁺ was not the linear effect, but the “low-dosage effect”.     

钙钛矿型催化剂催化湿式氧化处理煤气化废水纳滤浓缩液

采用溶胶-凝胶法制备了Mn掺杂钙钛矿型催化剂LaFexMn1-xO3,并以其为催化剂催化湿式双氧水氧化处理煤气化废水纳滤浓缩液。采用XRD,SEM,FTIR技术对催化剂进行了表征。表征结果显示：制备的催化剂均具有标准的钙钛矿型结构,其中,LaFe0.9Mn0.1O3的结构稳定,比表面积大。实验结果表明：制备的催化剂中LaFe0.9Mn0.1O3的催化活性最高,且稳定性好,连续使用5次后催化活性未见明显减弱;在H2O2投加量3.0 g/L、n（H2O2）∶n（LaFe0.9Mn0.1O3）=12∶1、反应温度160 ℃、反应压力1 MPa、浓缩液pH 3、反应时间60 min的最优条件下,COD、UV254和TOC的去除率分别达到80.9%、95.2%和68.0%,BOD5/COD由0.02提升至0.40,可生化性大幅提高。     

Absorption characteristics of potassium carbonate-based solutions with rate promoters and corrosion inhibitors

In this research, absorbents for CO₂ capture were prepared by blending 30 wt% potassium carbonate, 3 wt% of a rate promoter, and 1 wt% of a corrosion inhibitor. Pipecolic acid, sarcosine, and diethanolamine were chosen as rate promoter candidates. Based on a rate promoter screening test for CO₂ loading capacity and absorption rate, pipecolic acid and sarcosine were selected to be used as rate promoters. 1,2,3-benzotriazole and ammonium thiocyanate were chosen as corrosion inhibitors, and they were mixed with a 30 wt% potassium carbonate-based absorbent mixture containing one of the rate promoters. The absorption rates for four absorbent solutions (30 wt% potassium carbonate?+?3 wt% pipecolic acid?+?1 wt% 1,2,3-benzotriazole, 30 wt% potassium carbonate?+?3 wt% pipecolic acid?+?1 wt% ammonium thiocyanate, 30 wt% potassium carbonate?+?3 wt% sarcosine?+?1 wt% 1,2,3-benzotriazole, and 30 wt% potassium carbonate?+?3 wt% sarcosine?+?1 wt% ammonium thiocyanate) were measured, tabulated, and graphically displayed. These types of absorbents can be used for capturing CO₂ under high temperature and pressure conditions, such as those found in coal-fired power plants.     

电感耦合等离子体发射光谱法测定石化废水中的重金属

建立了硝酸加热消解后采用电感耦合等离子体发射光谱(ICP-OES)测定石化废水中重金属(As,Cd,Cr,Cu,Zn,Pb,Mn)的方法,优化了仪器工作参数,得到了线性回归方程,并对该方法进行了评价。优化后的仪器工作参数为射频功率1 150 W、雾化器流量0.70 L/min、辅助气流量0.50 L/min。各重金属元素回归方程的相关系数均在0.999 9以上,检出限为0.000 18~0.007 00 mg/L,相对标准偏差为0.1%~2.0%,加标回收率为96.3%~102.2%。该方法具有线性关系好、检出限低、精密度和准确度高、分析速度快等优点。