Influence of seat foam and geometrical properties on BioRID P3 kinematic response to rear impacts

As the primary interface with the human body during rear impact, the automotive seat holds great promise for mitigation of Whiplash Associated Disorders (WAD). Recent research has chronicled the potential influence of both seat geometrical and constitutive properties on occupant dynamics and injury potential. Geometrical elements such as reduced head to head restraint, rearward offset, and increased head restraint height have shown strong correlation with reductions in occupant kinematics. The stiffness and energy absorption of both the seating foam and the seat infrastructure are also influential on occupant motion; however, the trends in injury mitigation are not as clear as for the geometrical properties. It is of interest to determine whether, for a given seat frame and infrastructure, the properties of the seating foam alone can be tailored to mitigate WAD potential. Rear impact testing was conducted using three model year 2000 automotive seats (Chevrolet Camaro, Chevrolet S-10 pickup, and Pontiac Grand Prix), using the BioRID P3 anthropometric rear impact dummy. Each seat was distinct in construction and geometry. Each seat back was tested with various foams (i.e., standard, viscoelastic, low or high density). Seat geometries and infrastructures were constant so that the influence of the seating foams on occupant dynamics could be isolated. Three tests were conducted on each foam combination for a given seat (total of 102 tests), with a nominal impact severity of Delta V = 11 km/h (nominal duration of 100 msec). The seats were compared across a host of occupant kinematic variables most likely to be associated with WAD causation. No significant differences (p < 0.05) were found between seat back foams for tests within any given seat. However, seat comparisons yielded several significant differences (p < 0.05). The Camaro seat was found to result in several significantly different occupant kinematic variables when compared to the other seats. No significant differences were found between the Grand Prix and S-10 seats. Seat geometrical characteristics obtained from the Head Restraint Measuring Device (HRMD) showed good correlation with several occupant variables. It appears that for these seats and foams the head-to-head restraint horizontal and vertical distances are overwhelmingly more influential on occupant kinematics and WAD potential than the local foam properties within a given seat.     

Prediction of cervical spine injury risk for the 6-year-old child in frontal crashes

This article presents a series of 49 km/h sled tests using the Hybrid III 6-year-old dummy in a high-back booster, a low-back booster, and a three-point belt. Although a 10-year review at a level I trauma center showed that noncontact cervical spine injuries are rare in correctly restrained booster-age children, dummy neck loads exceeded published injury thresholds in all tests. The dummy underwent extreme neck flexion during the test, causing full-face contact with the dummy's chest. These dummy kinematics were compared to the kinematics of a 12-year-old cadaver tested in a similar impact environment. The cadaver test showed neck flexion, but also significant thoracic spinal flexion which was nonexistent in the dummy. This comparison was expanded using MADYMO simulations in which the thoracic spinal stiffness of the dummy model was decreased to give a more biofidelic kinematic response. We conclude that the stiff thoracic spine of the dummy results in high neck forces and moments that are not representative of the true injury potential.     

The impact of mandatory versus voluntary participation in the Alberta ignition interlock program

Research has demonstrated that participation in an interlock program significantly reduces the likelihood of subsequent driving while intoxicated (DWI) convictions at least so long as the interlock device is installed in the vehicle. Despite the growing number of jurisdictions that allow interlock programs and the demonstrated success of these programs, the proportion of DWI offenders who actually have the device installed is minimal. In an effort to increase the proportion of offenders using interlocks, some jurisdictions require offenders to install an interlock as a condition of license reinstatement whereas others merely offer offenders a reduction in the period of hard suspension if they voluntarily participate in an interlock program. The objective of the present study was to determine the extent to which voluntary interlock participants are more or less successful in terms of subsequent recidivism than those for whom interlock program participation has been mandated. The issue was addressed using data from the interlock program in Alberta, Canada, which provides for both mandatory and voluntary participation. The recidivism experience of voluntary and mandatory interlock participants was examined both during and after the period of interlock installation. Cox regression revealed that, after controlling for (or equating) the number of prior DWI offenses, the survival rates of DWI offenders who were ordered to participate in the interlock program did not differ from those of voluntary participants. These results suggest that further use of mandatory interlock programs should be just as successful as voluntary programs when offenders share characteristics with those studied in Alberta.     

Biosolids decomposition after surface applications in west Texas

In a semiarid environment, climate is a critical factor in the decomposition of surface-applied biosolids. This study examined the effect of 2- to 7-yr exposure times on the composition of single applications of New York, NY biosolids in western Texas. Exposure time effects on organic matter, N, P, S, Cu, Cr, Pb, Hg, and Zn were studied near Sierra Blanca, TX. Due to organic matter decomposition, total organic C decreased from 340 g kg(-1) in fresh biosolids to 180 g kg(-1) in biosolids after 82 mo of exposure, whereas the inorganic ash content of the biosolids increased from 339 to 600 g kg(-1). Total N decreased from 50 to 10 g N kg(-1) and total S decreased from 12 to 6 g S kg(-1). Bicarbonate-available P in the biosolids decreased from 0.9 to 0.2 g kg(-1). Successive H2O extractions yielded soluble P concentrations consistent with dicalcium phosphate (dical) for fresh biosolids and tricalcium phosphate (trical) for biosolids exposed for 59 months or more. Sparingly soluble phosphates, such as dical and trical, potentially yield > 0.5 mg P L(-1) in runoff waters for extended periods after biosolids applications, especially after multiple applications. Selective dissolution of the biosolids indicated that as much as 66 to 78% of P exists as iron phosphates, 16 to 21% as Fe oxides, and 5 to 12% as insoluble Ca phosphates. Chemical analyses of ash samples suggest that Cu and Zn have been lost from biosolids through leaching or runoff and no losses of Pb, Cr, or Hg have occurred since application.     

The effect of five forage species on transport and transformation of atrazine and isoxaflutole (balance) in lysimeter leachate

A field lysimeter study with bare ground and five different ground covers was established to evaluate the effect of forage grasses on the fate and transport of two herbicides in leachate. The herbicides were atrazine (ATR; 2-chloro-4-ethylamino-6-isopropylamino-1,3,5-triazine) and isoxaflutole [IXF; 5-cyclopropyl-4-(2-methylsulfonyl-4-trifluormethyl-benzoyl)isoxazole], which has the commercial name Balance (Aventis Crop Science, Strasbourg, France). The ground covers included orchardgrass (Dactylis glomerata L.), smooth bromegrass (Bromus inermis Leyss.), tall fescue (Festuca arundinacea Schreb.), timothy (Phleum pratense L.), and switchgrass (Panicum virgatum L.). The results suggested that the total IXF (parent + metabolites) showed higher mobility than ATR and its metabolites. Differences in the timing of transport reflected the rapid degradation of IXF to the more soluble, stable, and biologically active diketonitrile (DKN) metabolite in the system. Although grass treatments did not promote the hydrolysis of DKN, they significantly reduced its transport in the leachate through enhanced evapotranspiration. Grass treatments significantly enhanced ATR degradation in the leachates and soils, especially through N dealkylation, but they did not reduce total ATR transported in the leachate. Leachate from the orchardgrass lysimeters contained the highest proportion of ATR metabolites (64.2%). Timothy and smooth bromegrass treatments also displayed a significant increase in ATR metabolites in leachate. Grass-treated lysimeters showed higher microbial biomass carbon than bare ground. For ATR treatments, the proportion of metabolites in the leachate strongly correlated with the elevated soil microbial biomass carbon in forage treatments. In contrast, DKN degradation was poorly correlated with soil microbial biomass carbon, suggesting that DKN degradation is an abiotic process.     

Chemical extraction methods to assess bioavailable arsenic in soil and solid media

Soil ingestion by children is an important pathway in assessing public health risks associated with exposure to arsenic-contaminated soils. Soil chemical methods are available to extract various pools of soil arsenic, but their ability to measure bioavailable arsenic from soil ingestion is unknown. Arsenic extracted by five commonly used soil extractants was compared with bioavailable arsenic measured in vivo by immature swine (Sus scrofa) dosing trials. Fifteen contaminated soils that contained 233 to 17 500 mg kg(-1) arsenic were studied. Soil extractants were selected to dissolve surficially adsorbed and/or readily soluble arsenic (water, 1 M sodium acetate, 0.1 M Na2HPO4/0.1 M NaH2PO4) and arsenic in Fe and Mn oxide minerals (hydroxylamine hydrochloride, ammonium oxalate). The mean percent of total arsenic extracted was: ammonium oxalate (53.6%) > or = hydroxylamine hydrochloride (51.7%) > phosphate (10.5%), acetate (7.16%) > water (0.15%). The strongest relationship between arsenic determined by soil chemical extraction and in vivo bioavailable arsenic was found for hydroxylamine hydrochloride extractant (r = 0.88, significant at the 0.01 probability level). Comparison of the amount of arsenic extracted by soil methods with bioavailable arsenic showed the following trend: ammonium oxalate, hydroxylamine hydrochloride > in vivo > phosphate, acetate > water. The amount of arsenic dissolved in the stomach (potentially bioavailable) is between surficially adsorbed (extracted by phosphate or acetate) and surficially adsorbed + nonsurficial forms in Fe and Mn oxides (extracted by hydroxylamine hydrochloride or ammonium oxalate). Soil extraction methods that dissolve some of the amorphous Fe, such as hydroxylamine hydrochloride, can be designed to provide closer estimates of bioavailable arsenic.     

Measuring Plant Diversity in the Tall Threetip Sagebrush Steppe: Influence of Previous Grazing Management Practices

In July 2000, a 490-ha wildfire burned a portion of a long-term grazing study that had been established in 1924 at the US Sheep Experiment Station north of Dubois, Idaho, USA. Earlier vegetation measurements in this tall threetip sagebrush (Artemisia tripartita spp. tripartita) bunchgrass plant community documented significant changes in vegetation due to grazing and the timing of grazing by sheep. A study was initiated in May 2001 using 12 multiscale modified Whittaker plots to determine the consequences of previous grazing practices on postfire vegetation composition. Because there was only one wildfire and it did not burn all of the original plots, the treatments are not replicated in time or space. We reduce the potential effects of psuedoreplication by confining our discussion to the sample area only. There were a total of 84 species in the sampled areas with 69 in the spring-grazed area and 70 each in the fall- and ungrazed areas. Vegetation within plots was equally rich and even with similar numbers of abundant species. The spring-grazed plots, however, had half as much plant cover as the fall- and ungrazed plots and the spring-grazed plots had the largest proportion of plant cover composed of introduced (27%) and annual (34%) plants. The fall-grazed plots had the highest proportion of native perennial grasses (43%) and the lowest proportion of native annual forbs (1%). The ungrazed plots had the lowest proportion of introduced plants (4%) and the highest proportion of native perennial forbs (66%). The vegetation of spring-grazed plots is in a degraded condition for the environment and further degradation may continue, with or without continued grazing or some other disturbance. If ecosystem condition was based solely on plant diversity and only a count of species numbers was used to determine plant diversity, this research would have falsely concluded that grazing and timing of grazing did not impact the condition of the ecosystem.     

Integrated effects of applied pressure,time, and polymer doses on alum sludge dewatering behaviour

In this study, combinations of applied pressure, pressing time and polymer dose were examined in an air pressure plate apparatus to explore their integrated influence on the dewatering of an alum sludge. Results of the investigation demonstrated that dewatering can be enhanced by increases in pressure and time. However, a point is reached at which continued increases in pressure and time offer little benefit. The data also confirmed that polymer affects the rate of water release rather than the extent of dewatering. Increased rates of water release due to increasing polymer dose can be attributed to the aggregation of sludge particles by polymer addition. It was also evident in this study that the initial sludge depth has a major impact on the average cake moisture content at a given dewatering time. It was apparent that once the initial sludge thickness exceeds about 2 cm, the water release follows a fairly similar pattern, which can be represented by a simple empirical model.     

Waste ecocompatibility in storage and reuse scenarios: global methodology and detailed presentation of the impact study on the recipient environments

In 1995, the ADEME launched a research program called "Waste Ecocompatibility" in order to define a reliable methodology for measuring the impact of waste in storage or reuse scenarios. The French concept of "Ecocompatibility" is defined as the situation where the pollutant flux from waste disposed of or used in specified conditions is compatible with the environmental acceptance of the receiving environments. The chief feature of this definition is to integrate the evaluation of the three following terms: pollutants emission from the waste, transport of the pollutants from the waste to the receptor cells and the environmental acceptance of the receiving environments. The "Waste Ecocompatibility" program consisted of a literature survey and an experimental part. The literature study aimed to determine factors and waste characteristics to be considered for a reliable ecocompatility assessment, to provide an overview of the available tools for measuring those factors and characteristics and to propose a first approach of the methodology. In the framework of the experimental program, this approach was then applied to three theoretical scenarios to validate the laboratory tools (comparative study of laboratory and field results) and to calibrate the global methodology. This paper deals with the results of the experimental program concerning the impact study on receiving environments: impact on plants and microorganisms living in soil, impacts on soil fauna and aquatic fauna. In other papers we intend to present the operational methodology for the assessment of waste ecocompatibility. It includes bio-assays at laboratory scale (microcosms), pilot scale (mesocosms) and in situ experiments (experimental prairie). To limit the use of in situ experiments other research works are necessary to validate bio-assays at laboratory or pilot scale.