Contamination of butyltin and phenyltin compounds in the marine environment of Otsuchi Bay, Japan

Butyltin (BT) and phenyltin (PT) compounds were measured in seawater, sediment, and biological samples collected from coastal areas of Otsuchi Bay, Japan. Tributyltin (TBT) compounds in seawater, sediment, plankton, mussels, scallops and fish were in the range of 0.008-0.074 microg liter(-1), 0.01-0.64 mg (kg dry wt)(-1), 0.24-9.8 mg (kg dry wt)(-1), 0.04-0.18 mg (kg wet wt)(-1), 0.10-0.13 mg (kg wet wt)(-1) and 0.01-0.02 mg (kg wet wt)(-1), respectively. Trace amount of PTs were found in seawater. The highest concentrations of TBT and triphenyltin (TPT) were found near a shipyard. Triorganotin compounds were more dominant than their metabolites. A positive correlation was observed between the concentrations of TBT and TPT in the mussels. Concentrations of TBT and TPT in mussels were high in the upper intertidal zone, and decreased toward the water.     

Proposed mechanism for bacterial metabolism of polyacrylate

A possible aerobic degradative pathway for polyacrylate was examined with trimer (1,3,5-pentane tricarboxylic acid; PTCA)-utilizing bacteria. A few metabolic products from PTCA accumulated in culture filtrates and reaction mixtures of washed cells. Fraction A was detected as a main metabolite by high-performance liquid chromatography. A small amount of fraction B was concomitant with fraction A. Another fraction, C, was also detected. These compounds were suggested by liquid chromatography-mass spectrometry analyses to be 1,3,5-(1- or 2-pentene)tricarboxylic acid (fraction A or B) and 1,3,5-(2-oxopentane)tricarboxylic acid (fraction C). Fraction A was quickly further metabolized by washed cells, but fraction B was only gradually degraded. From these results, the metabolic pathway for polyacrylate is suggested to be quite similar to-oxidation for saturated fatty acids. The degradation of PTCA by washed cells was slower than that by growing cells and was inhibited by 5 mM NaN₃. This suggests that the metabolism is linked to a respiratory chain or energy-producing system of bacteria which can aerobically assimilate PTCA.Paper presented at the Bio/Environmentally Degradable Polymer Society—Second National Meeting, August 19–21, 1993, Chicago, Illinois.     

Proximate composition of household waste and applicability of waste management technologies by source separation in Hanoi,Vietnam

The organic fraction of municipal solid wastes in Southeast Asia, which has a high moisture content, accounts for a large proportion of total waste. Local governments need to pay adequate attention to the composition of wastes to determine alternative waste management technologies. This study proposed the use of a triangle diagram to describe changes in proximate composition and rates of successful source separation of municipal solid waste and to identify technical challenges about alternative waste management technologies such as incineration, composting, and refuse-derived fuel production based on physical and proximate composition analysis of household waste sampled in Hanoi, Vietnam, as a case study. The analysis indicated the effectiveness of different types of source separation as well as different levels of successful achievement of source separation as an adjustment mechanism for the proximate composition of waste. Proper categorization of wastes for source separation is necessary for the appropriate use of alternative waste management technologies. The results showed that, at a source separation rate of just greater than 0.52 in a three-way separation scheme, the waste separated as combustible waste would be suitable for incineration with energy recovery. Based on well-designed schemes of source separation, alternative waste management technologies can be applied.     

Bacterial degradation of a new polyester,polyethylene glycol-phthalate polyester

Microorganisms which can assimilate a new polyester synthesized from polyethylene glycol (PEG) as a dihydroxyl compound and phthalic acid as a dicarboxyl compound were isolated from soils by enrichment culture techniques. Two cultures, K and N, were obtained: Culture K grew on PEG 4000 polyester and culture N assimilated PEG 6000 polyester. Each culture included two bacteria indispensable for the degradation of polyesters: bacteria K1 and K2 for PEG 4000 polyester-utilizing culture K and bacteria N1 and N2 for PEG 6000 polyester-utilizing culture N. Bacteria K2 and N2 were responsible for the hydrolysis of ester bonds in a polyester and both were identified as the same species,Comamonas acidovorans. Bacteria K1 and N6 could assimilate PEG as a sole carbon and energy source. Both are Gram-negative, non-spore-forming rods and resembled each other on their colony characteristics, although strain K1 could not grow on PEG 6000.C. acidovorans N2 (K2) grew on dialkyl phthalates (C₂–C₄) and phthalate and tributyrin, but not on PEG, diphthalic PEG, and PEG phthalate polyesters. Their culture supernatant and washed cells hydrolyzed PEG (400–20,000) phthalate and sebacate polyesters.C. acidovorans had higher esterase activity toward PEG phthalate, isophthalate, and terephthalate polyesters than known esterase and lipases. The esterase seemed to be an extracellular one and attached to the cell surface.     

Analysis of COVID-19 waste management in Vietnam and recommendations to adapt to the ‘new normal’ period

Journal of Material Cycles and Waste Management - Amid the 4th wave of COVID-19, Vietnam reopened its economy, which placed extra burdens on the COVID-19 waste management system. This study...     

Validation of diffusive mini-samplers for aldehyde and VOC and its feasibility for measuring the exposure levels of elementary school children

Exposure to various chemicals can cause adverse effects to health, such as asthma and allergies, especially in children. Data on personal exposure levels in children are scarce, thus small lightweight diffusive mini-samplers for aldehydes and volatile organic compounds (VOCs) were designed to measure the exposure level of children to these chemicals. The aim of the study was to validate and examine the applicability of these mini-samplers for measuring daily chemical exposure. The diffusive mini-samplers are 20 mm in length, 11 mm in diameter, and 1.67 g in weight. The devices are cylindrically shaped with polytetrafluoroethylene membrane filters placed at each end. To measure aldehydes and acetone, 20 mg of 2,4-dinitrophenylhydrazine was used as an absorbent. To measure VOCs, a carbon molecular sieve was used. The sampling rate for each chemical was determined by parallel sampling with active samplers in a closed exposure bag. The blank levels of the chemicals and the storage stability of the device were tested. The mini-samplers were compared to commercially available diffusive samplers. To examine the applicability of the samplers, 65 elementary school children carried them for 24 h. The sampling rates for formaldehyde, acetaldehyde, and acetone were 20.9, 22.9, and 19.7 mL min(-1), respectively. The limits of quantification (LOQ) for the 24-hour sampling by high-performance liquid chromatography/ultraviolet (HPLC/UV) analysis were 8.3, 7.6, and 8.8 μg m(-3) for formaldehyde, acetaldehyde, and acetone, respectively. The sampling rates for the 11 VOCs were determined and ranged from 3.3 mL min(-1) for styrene and 2-ethyl-1-hexanol to 11.7 mL min(-1) for benzene. The LOQ for the 24-hour sampling by gas chromatography-mass spectrometry (GC-MS) analysis ranged from 5.9-105.2 μg m(-3), 1.1-24.7 parts per billion. The storage stability after 5 days ranged from 94.8 to 118.2%. Formaldehyde, acetone, benzene, and toluene were detected above the LOQ in more than 90% of the children, and the median concentrations were 21.7, 20.9, 10.1, and 21.5 μg m(-3), respectively. This study shows that the diffusive samplers developed were suitable for children to carry and were capable of measuring the children's daily chemical exposure.     

Drivers and constraints of waste-to-energy incineration for sustainable municipal solid waste management in developing countries

Journal of Material Cycles and Waste Management - Implementation of waste-to-energy (WtE) incineration has recently surged in developing countries, but the drivers of this growth and the...