INVESTIGATION OF TURBIDITY MAXIMUM IN A MESOTIDAL ESTUARY,TAIWAN1

ABSTRACT: To comprehend the distributions of salinity, temperature, and suspended sediment in the Danshuei River estuary in Taiwan, monthly field surveys were conducted in 2003. These included several high and low slackwater surveys and intensive surveys. The results show that the Danshuei River estuary is predominately a partially mixed estuary. The highest concentration of suspended sediment is typically observed at the Chung‐Hsin Bridge, the most upstream sampling station. The suspended sediment concentration exhibits a general decreasing trend in the downstream direction. It may be concluded that the sediments mostly come from the upstream reach. A locally high concentration of suspended sediment is found at the Kuan‐Du station because of the local deep channel bathymetry and two‐layered estuarine circulation. A vertical two‐dimensional hydrodynamic and sediment transport model is applied to investigate the tidally averaged salinity distribution, residual circulation, and suspended sediment concentration. The modeling results reveal that, under the Q₇₅ flow condition (i.e., low flow), a turbidity maximum occurs at the Kuan‐Du station due to the strong estuarine circulation. The model simulation with a much higher river flow condition results in a weaker residual circulation and weaker turbidity maximum.     

DEVELOPMENT OF A BASIN GEOMORPHIC INFORMATION SYSTEM USING A TIN-DEM DATA STRUCTURE1

ABSTRACT: To make a distributed rainfall-runoff model, it is very important to build a model of topographic surface of a basin which takes account of the direction of water flow. In this paper, a geographic information system in hydrologic modeling, the BGIS (Basin Geomorphic Information Systems) are presented for modeling a river basin using a TIN-DEM (Triangulated Irregular Network - Digital Elevation Model) data structure. The BGIS have two core systems, which are the TIN-DEM generating system and the topographic analysis system. In the TIN-DEM generating system, landscapes are modeled as a set of contiguous non-overlapping terangular facets whose vertices are made up of points on a regular grid DEM and on river segments. These triangular facets are subdivided, if needed, so that each of them has only one side through which water flows out. The TIN-DEM generating system is made up of four modules, (1) a module for generating triangles from a grid DEM, (2) a module for getting rid of pits, (3) a module for joining discontinuous valley segments to a channel network, (4) a module for subdividing triangular facets. In the topographic analysis system, using datasets processed with the TIN-DEM generating system, a watershed source area for any segments in a stream network are delineated automatically, and topographic attributes of slopes, aspects, flow path lengths and upslope contributing areas are computed.     

Behavior of dialifor, dimethoate, and methidathion in artificially fortified grape juice processed into wine.

Dialifor and methidathion were added to diluted "Zinfandel" grape concentrate at 25 ppm and dimethoate at 1.0 and 25 ppm prior to fermentation with Saccharomyces cerevisiae. The finished wine 56 days later contained 10% (2.5 ppm) of the dialifor, 46% (12 ppm) of the methidathion and 85% (21 and 0.98 ppm) of the dimethoate added to the grape must. Residues in wine stored at 24 degrees C dissipated by hydrolysis; half-lives in wine were 7 days for dialifor and methidathion and 30 days for dimethoate. Residues were unchanged in wine in frozen storage for one year. Analysis of seven commercial wines for dimethoate indicated less than 0.03 ppm dimethoate was present; identity could not be confirmed by thin-layer chromatography at this level.     

Feeding habits of marine cladocerans in the Inland Sea of Japan

Natural food items of five species of marine cladocerans, Evadne nordmanni, E. tergestina, Penilia avirostris, Podon leuckarti and P. polyphemoides, were investigated in the Inland Sea of Japan between April 1986 and May 1987. Gut content examination with SEM (scanning electron microscopy) revealed that feeding was largely limited to centric diatoms and a few exceptions of pennate diatoms and dinoflagellates. No animal remains were detected, and some unidentified materials were also found. Phytoplankton smaller than 35 m in size (cell diameter in centric diatoms and longest dimension in others) was found most frequently in the gut of cladocerans. The role of grazing of marine cladocerans in trophodynamic pathways of the pelagic realm is discussed.     

Re-emission of heavy water vapour from soil to the atmosphere

The re-emission process of tritiated water (HTO) deposited on a soil surface is an important process to assess tritium doses to the general public around nuclear fusion facilities in future. A field experiment using heavy water (HDO) as a substitute for HTO was carried out in the summertime to investigate the re-emission process of HTO from soil to the atmosphere. In the experiment, the time variations of depth profiles of HDO concentrations in soil exposed to HDO vapour and soil mixed with HDO were measured during the re-emission process on the field. The HDO concentrations in soil water in top soil layers of both the exposed and mixed soil rapidly decreased with time during the re-emission. However, the decrease of exposed soil was much greater than that of mixed soil. The re-emission process was analysed using a model including the evaporation of HDO from soil, the exchange between soil HDO and air H2O, and the diffusion of HDO in soil. It was found that the model is applicable to calculating the time variations of detailed depth profiles of HDO concentration in soil water in surface soil layers, using an estimated exchange velocity.     

Monitoring of radionuclides contamination of soils in Shatsk National Natural Park (Volyn region, Ukraine) during 1994-2001

The results of studies of radionuclide contamination of the soils in the western part of the territory of Shatsk National Natural Park (ShNNP), Volyn region, Ukraine, performed during 1994-2001 are presented. Based on the experimental results, the three-dimensional plot of the 137Cs density contamination for the soils at the territory under investigation has been constructed. The monitoring during 1994-2001 of the 137Cs vertical distributions in the different kinds of soils from the Park and the forecasting of the distribution changes of the depth down to 50 cm for the sod loamy sandy gleyed loamy sand soil of the Park up to 2086 have been performed.     

Spatial distribution of DDT in sediments from estuarine rivers of central Florida

Sediments may act as both a carrier for and a potential source of contaminants such as toxic organics in aquatic environments. This study investigated the spatial distribution of the pesticide DDT [1,1, 1-trichloro-2,2-bis(p-chlorophenyl)ethane] in sediments from the Cedar and Ortega Rivers located in the lower St. Johns River basin, Florida, USA, using field measurements and three-dimensional kriging analysis. High DDT concentrations were found near the junction of the Cedar and Ortega Rivers and at the north end of the Ortega River in the upper 0.5 m of the sediments, indicating that the sediment was enriched with DDT in the top layer although use of this chlorinated compound was banned in 1972. Further study revealed that the influence of sediment grain size or texture on DDT contamination was negligible in this river system and no linear correlations existed among DDT and its metabolites such as DDD [1,1-dichloro-2,2-bis(p-chlorophenyl)ethane] and DDE [1,1-dichloro-2,2-bis(p-chlorophenyl)ethylene]. Comparison of three-dimensional distribution of DDT content to the Florida sediment quality assessment guideline or probable effect level (PEL) showed several "hot spots" in the Ortega River sediments, where DDT contents exceeded the PEL value of 4.78 microg kg(-1). Such contamination may pose a significant hazard to aquatic life.     

EMMC process for combined removal of organics, nitrogen and an odor producing substance

In order to improve the process performance regarding the removal of organics, nitrogen, and an odor-causing compound (sulfide) contained in domestic wastewater, an entrapped-mixed-microbial cell (EMMC) with and without humic substances for both fixed and moving carrier reactors and conventional suspended growth culture (i.e. conventional activated sludge process) were investigated simultaneously. Both synthetic (simulated to the organics concentration of general domestic sewage) and actual domestic wastewater were investigated under operational conditions of 12 h of hydraulic retention time (HRT) with 1 h of aeration and 1 h of non-aeration, and 6 h of HRT with continuous aeration, at a room temperature of 25 +/- 2 degrees C. It was found that entrapping humic substances in the EMMC carriers had no impact on the removal of organics, nitrogen, and the odor-producing compound. Additionally, the performance of the EMMC moving carrier system for the removal of these pollutants is similar to that of the EMMC fixed carrier system. In general, the EMMC associated systems which provide high solids retention time achieve a better removal of chemical oxygen demand (COD), nitrogen, and the odor-producing substance than the suspended growth system for both HRTs of 6 h (continuous aeration) and 12 h (1 h of aeration and 1 h of non-aeration). Both the fixed and moving carrier EMMC processes, therefore, have the potential for improvement or replacement of the existing conventional activated sludge process with regard to improving the effluent qualities (such as COD, nitrogen and odor-producing compound) for reuse/disposal.     

Integrated effects of applied pressure,time, and polymer doses on alum sludge dewatering behaviour

In this study, combinations of applied pressure, pressing time and polymer dose were examined in an air pressure plate apparatus to explore their integrated influence on the dewatering of an alum sludge. Results of the investigation demonstrated that dewatering can be enhanced by increases in pressure and time. However, a point is reached at which continued increases in pressure and time offer little benefit. The data also confirmed that polymer affects the rate of water release rather than the extent of dewatering. Increased rates of water release due to increasing polymer dose can be attributed to the aggregation of sludge particles by polymer addition. It was also evident in this study that the initial sludge depth has a major impact on the average cake moisture content at a given dewatering time. It was apparent that once the initial sludge thickness exceeds about 2 cm, the water release follows a fairly similar pattern, which can be represented by a simple empirical model.