A study on the self-assembly behavior of dark materials from molasses

We have previously demonstrated that dark materials (DM) in acidified molasses are effectively adsorbed to Amberlite XAD7HP resin and are eluted from the resin with 0.1 M sodium hydroxide. In this paper, we have characterized the self-assembly behavior of molasses DM by using dynamic and static light scattering in combination with isoelectric focusing and infrared absorption spectroscopy in order to better understand the resin adsorption mechanism. One of DM derivatives, X-G2, contained carboxyl and hydroxyl groups and had a weight-average molar mass of 9.39?×?10³ to 4.42?×?10⁴ at pH 2.1–11.5. The aggregates retained their spherical shape over the full pH range and the large gyration radius (66.4–80.0 nm) indicated that the inner structure was loosely packed. Furthermore, X-G2 had an isoelectric point of 1.8, and its density increased sharply at pH 5.9 and then approached a nearly constant value under alkaline conditions. In summary, the self-assembly processes of DM are controlled by intermolecular hydrogen-bonding and hydrophobic interactions. The aggregates adsorb to the resin through hydrophobic interactions and are eluted when excess carboxylate anions are generated.     

Effects of a composition change of ordinary Portland cement on waste utilization and CO2 emissions in Japan

Journal of Material Cycles and Waste Management - This paper estimates the effects of a composition change of ordinary Portland cement on waste utilization and CO2 emissions in the Japanese cement...     

Fabric-filter-supported catalyst for removal of harmful solid and gaseous compounds in municipal waste incinerator exhaust gas: characteristics of NO x reduction

We have investigated a fabric-filter-supported catalyst for removing harmful solid and gaseous compounds simultaneously from municipal incinerator exhaust gas. We studied the ways in which the efficiency of NO _x removal is influenced by filter temperature, gas flow rate, and catalyst content. The reduction of the catalyst content by mechanical reverse washing was investigated, and the state of the catalyst supported in the fabric filter was also observed using a scanning electron microscope. The catalyst supported by the fabric filter showed a removal efficiency above 75% when the filter temperature was 200°C, the gas flow rate was 1 m/min, and the catalyst content of the fabric filter was above 300 g/m². The catalyst was supported uniformly on the fibers of the fabric filter, and fine catalyst particles remained on the fibers after mechanical reverse washing. Received: October 15, 1997 / Accepted: March 19, 1999     

Field study of nitrous oxide production with in situ aeration in a closed landfill site

Nitrous oxide (N₂O) has gained considerable attention as a contributor to global warming and depilation of stratospheric ozone layer. Landfill is one of the high emitters of greenhouse gas such as methane and N₂O during the biodegradation of solid waste. Landfill aeration has been attracted increasing attention worldwide for fast, controlled and sustainable conversion of landfills into a biological stabilized condition, however landfill aeration impel N₂O emission with ammonia removal. N₂O originates from the biodegradation, or the combustion of nitrogen-containing solid waste during the microbial process of nitrification and denitrification. During these two processes, formation of N₂O as a by-product from nitrification, or as an intermediate product of denitrification. In this study, air was injected into a closed landfill site and investigated the major N₂O production factors and correlations established between them. The in-situ aeration experiment was carried out by three sets of gas collection pipes along with temperature probes were installed at three different distances of one, two and three meter away from the aeration point; named points A-C, respectively. Each set of pipes consisted of three different pipes at three different depths of 0.0, 0.75 and 1.5 m from the bottom of the cover soil. Landfill gases composition was monitored weekly and gas samples were collected for analysis of nitrous oxide concentrations. It was evaluated that temperatures within the range of 30–40°C with high oxygen content led to higher generation of nitrous oxide with high aeration rate. Lower O₂ content can infuse N₂O production during nitrification and high O₂ inhibit denitrification which would affect N₂O production. The findings provide insights concerning the production potentials of N₂O in an aerated landfill that may help to minimize with appropriate control of the operational parameters and biological reactions of N turnover.

Implications: Investigation of nitrous oxide production potential during in situ aeration in an old landfill site revealed that increased temperatures and oxygen content inside the landfill site are potential factors for nitrous oxide production. Temperatures within the range of optimum nitrification process (30–40°C) induce nitrous oxide formation with high oxygen concentration as a by-product of nitrogen turnover. Decrease of oxygen content during nitrification leads increase of nitrous oxide production, while temperatures above 40°C with moderate and/or low oxygen content inhibit nitrous oxide generation.     

Measurement of natural radioactive nuclide concentrations in various metal ores used as industrial raw materials in Japan and estimation of dose received by workers handling them

Natural resources such as ores and rocks contain natural radioactive nuclides at various concentrations. If these resources contain high concentrations of natural radioactive nuclides, workers handling them might be exposed to significant levels of radiation. Therefore, it is important to investigate the radioactive activity in these resources. In this study, concentrations of radioactive nuclides in Th, Zr, Ti, Mo, Mn, Al, W, Zn, V, and Cr ores used as industrial raw materials in Japan were investigated. The concentrations of ²³⁸U and ²³²Th were determined by inductively coupled plasma mass spectrometry (ICP-MS), while those of ²²⁶Ra, ²²⁸Ra, and ⁴⁰K were determined by gamma-ray spectrum. We found the concentrations of ²³⁸U series, ²³²Th series, and ⁴⁰K in Ti, Mo, Mn, Al, W, Zn, V, and Cr ores to be lower than the critical values defined by regulatory requirements as described in the International Atomic Energy Agency (IAEA) Safety Guide. The doses received by workers handling these materials were estimated by using methods for dose assessment given in a report by the European Commission. In transport, indoor storage, and outdoor storage scenarios, an effective dose due to the use of Th ore was above 4.3 × 10⁻² Sv y⁻¹, which was higher than that of the other ores. The maximum value of effective doses for other ores was estimated to be about 4.5 × 10⁻⁴ Sv y⁻¹, which was lower than intervention exemption levels (1.0 × 10⁻³ Sv y⁻¹) given in International Commission of Radiological Protection (ICRP) Publication 82.     

Persistent organochlorine pesticide residues in animal feed

Animal products like milk and meat are often found to be contaminated with residues of persistent pesticides and other toxic substances. The major source of entry of these compounds to animal body is the contaminated feed and fodder. So, unless the residues are managed at this stage, it is very difficult to prevent contamination in milk and meat. Therefore, the status of residue level of most persistent organochlorinated pesticides (OCP) in feed and fodder should be monitored regularly. The frequency of occurrence and contamination levels of OCP residues in different kinds of animal concentrate feed and straw samples collected from Bundelkhand region of India were determined. Out of 533 total samples, 301 i.e. 56.47% samples were positive containing residues of different OCPs like hexachlorocyclohexane (HCH) isomers, dichlorodiphenyltrichloroethane (DDT) complex, endosulfan and dicofol. Among different HCH isomers, the mean concentration of ??-HCH was highest, and total HCH varied from 0.01 to 0.306 mg kg^???1. In case of DDT complex, i.e. DDD, DDE and DDT, the concentration ranged between 0.016 and 0.118 mg kg^???1 and the pp^| isomers were more frequently encountered than their op^| counterparts. Endosulfan was also found in some samples in concentration ranging from 0.009 to 0.237 mg/kg, but dicofol could be recorded in very few samples. Although feed samples were found to contain OC residues, after comparing their levels in positive samples with the limiting values of respective pesticides, only very few were found to exceed the threshold level. Otherwise, they were mostly within safe limits.     

Degradation of fats during thermophilic composting of organic waste.

The degradation of fats during thermophilic composting was investigated by adding lard of four different mixing ratios (0, 33.3, 42.9 and 50% on a dry weight basis) to dog food used as a model substrate for organic waste. The lard added at the mixing ratio of 33.3% did not inhibit the decomposition of organic matter in the dog food, with lard itself beginning decomposition after decay of more easily decomposable organic compounds of the dog food, 84 h from the start of composting. The percentage of lard decomposition reached as high as 29.3% by the end of 8 days of composting. By contrast, the decomposition of organic matter in the processed dog food was apparently inhibited when the portion of lard was greater than 33.3%, especially at the earliest stage of composting. It is possible, however, that lard would decompose vigorously once decomposition has begun, even when the ratio of lard is as high as 50%. The percentages of lard decomposition in composting mixtures with 42.9 and 50% lard were 15.7 and 9.50%, respectively, thus the higher the mixing ratio of lard, the lower the percentage of lard decomposition. However, it was found that the maximum decomposition rate of the lard was similar for all of the ratios tested; that is, approximately 5.0 x 10(-3) g carbon h(-1).     

Social dominance modifies behavioral rhythm in a queenless ant

Social insects provide an intriguing model system in chronobiology. Typically, an egg-laying queen exhibits arrhythmicity in activity while foraging worker has clear rhythmicity. In the queenless ant, Diacamma sp., from Japan, colony members lack morphological caste, and reproductive differentiation occurs as a consequence of dominance hierarchy formation. Their specialized dominance interaction “gemmae mutilation”, provide us a fascinating model system to investigate the effect of social dominance on rhythmic ontogeny. Measurement of individual rhythms revealed that they have clear circadian rhythm at eclosion but it is diminished by social mutilation of gemmae. Moreover, unlike highly eusocial species, mated egg-layer (i.e., gamergate) possessed a circadian rhythm even after mating in Diacamma. Measurement of colony-level rhythms revealed that gemmae mutilations are performed in the limited time of the day, but foraging occurs around-the-clock. The above finding is a novel form of temporal organization in social insects, providing a new insight in morphologically casteless species. We discuss the causes and consequences of rhythmic variability in social organization.