Estimation and field measurement of methane emission from waste landfills in Hanoi, Vietnam

A methodology for estimating the methane emissions from waste landfills in Hanoi, Vietnam, as part of a case study on Asian cities, was derived based on a survey of documents and statistics related to waste management, interviews with persons in charge, and field investigations at landfill sites. The waste management system in Hanoi was analyzed to evaluate the methane emissions from waste landfill sites. The quantity of waste deposited into the landfill was evaluated from an investigation of the waste stream. The composition of municipal waste was surveyed in several districts in the Hanoi city area, and the quantities of degradable organic waste that had been deposited into landfill for the past 15 years were estimated. Field surveys on methane emissions from landfills of different ages (0.5, 2, and 8 years) were conducted and their methane emissions were estimated to be 120, 22.5, and 4.38 ml/min/m², respectively. The first-order reaction rate of methane generation was obtained as 0.51/year. Methane emissions from waste landfills were calculated by a first-order decay model using this emission factor and the amount of landfilled degradable waste. The estimates of methane emissions using the model accorded well with the estimates of the field survey. These results revealed that methane emissions from waste landfills estimated by regional-specific and precise information on the waste stream are essential for accurately determining the behavior of methane emissions from waste landfills in the past, present, and future.     

Efficient chemical recycling of waste fiber-reinforced plastics: use of reduced amounts of dimethylaminopyridine and activated charcoal for the purification of recovered monomer

We have achieved major improvements in the efficient chemical recycling of waste fiber-reinforced plastics (FRPs). The effects of reduction in the amounts of dimethylaminopyridine (DMAP) used for depolymerization were examined. The treatment of waste FRP in the presence of 1 or 2 wt% DMAP resulted in the successful recovery of monomeric materials that could be employed in the polymerization process to produce recycled plastic. The separation of linker units from glass fiber, however, was unsuccessful. The purity of the recovered monomeric material, when treated with activated charcoal, was improved to about 70%. This resulted in effective decoloration of the recovered monomer. Finally, the purified material, after undergoing repolymerization, provided high-quality recycled plastic comparable to new plastics produced from new monomers.     

Improved preparation of recycled polymers in chemical recycling of fiber-reinforced plastics and molding of test product using recycled polymers

We examined an improved preparation method of recycled unsaturated polyester resin from recovered monomeric materials obtained from the depolymerization of fiber-reinforced plastics (FRPs). The formation of unsaturated polyester progressed smoothly in the presence of catalytic amounts of Ca(OAc)₂ and Ti(OBu)₄. The quality of the resin was estimated by the durometer hardness test. The strength test of FRP board prepared from recycled resin showed sufficient hardness for practical use (about 94% of the tensile strength of new resin). We examined the recycled resin by using it to mold successfully an actual test product.     

Aerobic composting of waste activated sludge: kinetic analysis for microbiological reaction and oxygen consumption

In order to examine the optimal design and operating parameters, kinetics for microbiological reaction and oxygen consumption in composting of waste activated sludge were quantitatively examined. A series of experiments was conducted to discuss the optimal operating parameters for aerobic composting of waste activated sludge obtained from Kawagoe City Wastewater Treatment Plant (Saitama, Japan) using 4 and 20 L laboratory scale bioreactors. Aeration rate, compositions of compost mixture and height of compost pile were investigated as main design and operating parameters. The optimal aerobic composting of waste activated sludge was found at the aeration rate of 2.0 L/min/kg (initial composting mixture dry weight). A compost pile up to 0.5 m could be operated effectively. A simple model for composting of waste activated sludge in a composting reactor was developed by assuming that a solid phase of compost mixture is well mixed and the kinetics for microbiological reaction is represented by a Monod-type equation. The model predictions could fit the experimental data for decomposition of waste activated sludge with an average deviation of 2.14%. Oxygen consumption during composting was also examined using a simplified model in which the oxygen consumption was represented by a Monod-type equation and the axial distribution of oxygen concentration in the composting pile was described by a plug-flow model. The predictions could satisfactorily simulate the experiment results for the average maximum oxygen consumption rate during aerobic composting with an average deviation of 7.4%.     

Toxicological evaluation of the chemical oxidation methods for landfill stabilization

As the stabilization criteria for landfill sites, only chemical criteria for the leachate discharges from the landfill sites have been used in Japan and many other countries. Recently, chemical oxidation has been developed as a method for the early-stabilization of landfills. However, by-products that are difficult to detect by chemical analysis can be produced by this method. Therefore, toxicity tests are useful tools for detecting the changes of leachate quality after application of this method. The heat source in the A landfill was analyzed by organic position inquiry technology, and ozone-treated leachate was sprayed back to the heat source in the landfill. Toxicity changes of the leachate after the spray were monitored using Microtoxtrade mark, ToxScreen-II, and DaphTox tests. The hardly-degradable organic matter was efficiently removed and toxicities of the leachate in the heat source decreased after the application. These toxicity results were significantly related to chemical oxygen demand (COD) changes. Thus, it was concluded that the toxicity tests were effective for monitoring the leachate quality after applying the chemical oxidation method for landfill stabilization, and its incorporation to establish the criteria for early-stabilization of landfill sites needs to be considered.     

Concentration and distribution of dioxins and related compounds in human tissues

Polychlorinated dibenzo-p-dioxin, polychlorinated dibenzofuran and dioxin-like polychlorinated biphenyl concentrations in human blood, lung, liver, bile, pancreas, spleen, kidney and mesentery fat were determined to assess the concentrations and distribution of these chemicals in human tissues from 20 donors. The mean TEQ concentrations in blood, lung, liver, bile, spleen, pancreas, kidney and mesentery fat were 119, 178, 228, 50, 113, 163, 138 and 139 pg TEQ/g lipid, respectively. Parallel levels were seen in the blood, spleen, kidney and mesentery fat; in the lungs and pancreas, the levels were somewhat higher. Among the organ tissues samples, the highest concentration was observed in the liver and the lowest in the bile. Mean total-TEQ concentration of the liver was about 4.5 times higher than that of bile. Positive correlations were observed among the concentrations of dioxins in various tissues. However, the concentrations in bile were not correlated with any tissues. It is suggested that the distribution behavior of dioxin-like congeners in human tissues varies among tissues and the kinds of congeners ingested. To evaluate the relationship between the accumulation levels of dioxins and their pathophysiological significance or risk, data must be accumulated from a more extensive group of human samples.     

Prenatal diagnosis of atelosteogenesis type I at 21 weeks' gestation

We describe prenatal diagnosis in a male fetus at 21 weeks of gestation with atelosteogenesis type I (AO I). Fetal ultrasonography (US) revealed absent or deficient ossification of the posterior neural arches of the thoracic spine, humeri, radii, ulnae, fibulae, and short tubular bones other than the distal phalanges, in addition to extremely short, thick femora. Fetal magnetic resonance imaging (MRI) using an ultrafast imaging sequence depicted dysmorphic features, pulmonary hypoplasia, and large cisterna magna. Postmortem radiographs warranted a diagnosis of AO I. Autopsy corroborated not only pulmonary hypoplasia but also laryngeal stenosis. The chondro-osseous histological findings were consistent with those of AO I. Meticulous evaluation using fetal US and MRI permits a definitive prenatal diagnosis of AO I to be made. Copyright © 2002 John Wiley & Sons, Ltd.     

How is a giant sperm ejaculated? Anatomy and function of the sperm pump, or “Zenker organ,” in Pseudocandona marchica (Crustacea, Ostracoda, Candonidae)

‘Giant sperm’, in terms of exceptionally long spermatozoa, occur in a variety of taxa in the animal kingdom, predominantly in arthropod groups, but also in flatworms, mollusks, and others. In some freshwater ostracods (Cypridoidea), filamentous sperm cells reach up to ten times the animal’s body length; nonetheless, during a single copulation several dozen sperm cells can be transferred to the female’s seminal receptacle. This highly effective ejaculation has traditionally been credited to a chitinous-muscular structure within the seminal duct, which has been interpreted as a sperm pump. We investigated this organ, also known as the Zenker organ, of a cypridoid ostracod, Pseudocandona marchica, utilizing light and electron microscope techniques and produced a three-dimensional reconstruction based on serial semi-thin histological sections. This paper shows that numerous muscle fibers surround the central tube of the Zenker organ, running in parallel with the central tube and that a thin cellular layer underlies the muscular layer. A cellular inner tube exists inside the central tube. A chitinous-cellular structure at the entrance of the organ has been recognized as an ejaculatory valve. In male specimens during copulation, we confirmed a small hole derived from the passage of a single spermatozoon through the valve. The new data allowed for proposing a detailed course of operation of the Zenker organ during giant sperm ejaculation.