The seasonal effects of manure management and feeding strategies on hydrogen sulphide emissions from stored dairy manure

Journal of Material Cycles and Waste Management - The influence of temperature and storage time on hydrogen sulphide (H2S) emissions from two different dairy manures was investigated over four...     

Anaerobic co-digestion of dairy cow manure and high concentrated food processing waste

Anaerobic co-digestion of dairy manure (DM) and concentrated food processing wastes (FPW) under thermophilic (55 °C) and mesophilic (35 °C) temperatures, and fertilizer value of the effluent were investigated in this study. Two types of influent feedstock were utilized: 100 % DM and a 7:3 mixture (wet weight basis) of DM and FPW. The contents of the FPW, as feedstock were 3:3:3:1 mixture of cheese whey, animal blood, used cooking oil and residue of fried potato. Four continuous digestion experiments were carried out in 10 L digesters. Co-digestion under thermophilic temperature increased methane production per digester volume. However, co-digestion at 35 °C was inhibited. Total Kjeldahl nitrogen (N) recovered after digestion ranged from 73.1 to 91.9 %, while recoveries of ammonium nitrogen (NH₄-N) exceeded 100 %. The high recovery of NH₄-N was attributed to mineralization of influent organic N. The mixture of DM and FPW showed greater recoveries of NH₄-N after digestion compared to DM only, reflecting its greater organic N degradability. The ratios of extractable to total calcium, phosphorus and magnesium were slightly reduced after digestion. These results indicate that co-digestion of DM and FPW under thermophilic temperature enhances methane production and offers additional benefit of organic fertilizer creation.     

Antibiotic removal from waste milk by electrochemical process: degradation characteristics in concentrated organic solution

Journal of Material Cycles and Waste Management - The use of antibiotics in lactating dairy cows produces waste milk containing antibiotic residues. Antibiotics have been one of the emerging...     

Light Stability of Oriental Lacquer Films Irradiated by a Fluorescent Lamp

Oriental lacquer film was prepared and exposed to a fluorescent lamp. The color difference and gloss of the surface of the film decreased compared to those of film kept in a dark place by irradiation with the fluorescent light. The percentage of discoloration was 7.0% on a relative scale with an irradiation of 3600 h. The surface of the film was characterized by X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy. The oxygen content of the surface increased considerably with the decrease in triene groups with exposure time. These changes were also observed when the film was exposed in a glass or acrylic plate box. The change of the above properties was not observed when the film was kept in a dark place for more than 4800 h. The results suggest that oriental lacquer film deteriorates even under irradiation with visible light.     

Demonstration study of high temperature melting for asbestos-containing waste (ACW)

The service life of many buildings and houses built using asbestos-containing materials is coming to an end and their demolition will lead to a great deal of asbestos-containing waste (ACW). Conventionally, the disposal of such waste is conducted by isolation under controlled landfill procedures; however problems with this method exist, such as the risk at the time of re-utilization of landfill sites and the depletion of lands to be reclaimed. Melting treatment is a promising technology that could be used to solve these problems; a thermal process involving temperatures exceeding the melting points of asbestos, it transforms them into non-hazardous minerals. This technology may be applicable not only for friable ACW but also for nonfriable ACW. We performed a demonstration test of melting treatment of nonfriable ACW using a gasification and melting furnace of the shaft furnace type, which is a typical method for high temperature melting. Detailed observation using transmission electron microscopy as well as general analyses verified that the same level of asbestos remained in the slag obtained by high temperature melting as that of the background soil. In addition, the asbestos concentration in the exhaust gas and the dust from the facility were at sufficiently low levels, and it was thus verified that the asbestos concentration in the atmosphere in the vicinity of the facility during the melting treatment was comparable to that of Japan’s background level reported by the Ministry of the Environment in 2007.     

Development of waste gasification and gas reforming system for municipal solid waste (MSW)

To achieve both high-efficiency power generation and high detoxification performance, advanced-type waste power generation plants such as pyrolysis and gas reforming plants are suggested. Further surveys on actual operational data of these plants are required in terms of reliability of the system when it is introduced to waste disposal sites. To verify the technical effectiveness of advanced-type waste power generation using the pyrolysis and gas reforming method, we evaluated 10?tons/day of municipal solid wastes (MSW) treated in a demonstration plant. A demonstration test was conducted over 100?days including 35?consecutive days of operation treating MSWs. The test results show high recycling performance and harmless nature of the plant which proves it to be an excellent waste recycling system. Major test results are as follows: (1) stabilization of waste treatment is possible with the wastes of various qualities, (2) clean gas is produced from the waste whose energy recovery ratio is approximately 40?%. (3) 99.3?% weight % of dried waste are recovered as valuable materials such as clean gas, char and metal, (4) total amount of dioxin emission to the outside of the plant is very small, down to 0.0051–0.018?μg?TEQ per ton waste.     

Comparative fertilizer properties of digestates from mesophilic and thermophilic anaerobic digestion of dairy manure: focusing on plant growth promoting bacteria (PGPB) and environmental risk

The fertilizer properties of anaerobic digestate depend on the feedstock and operating conditions of digestion. In this study, the comparative fertilizer properties of mesophilic and thermophilic digestates from dairy manure were evaluated for plant nutrient contents, and special attention was paid to plant growth promoting bacteria (PGPB). Two digestates contained similar plant nutrient contents, while the thermophilic digestate contained higher contents of NH₄⁺–N. The quantity of Bacillus and Pseudomonas in the mesophilic digestate was significantly higher than in the thermophilic digestate. Furthermore, Bacillus showed siderophore production and antifungal activity (43.5–75.3%), and Pseudomonas showed siderophore and phytohormone production (4.2–75.2 µg ml^?1). One phosphate solubilizing isolate was also detected in the mesophilic digestate. These results indicated that two digestates showed different fertilizer properties with respect to nutrient contents and PGPB, and digestates had the potential to increase the availability of phosphorus and iron in the soil, both to provide phytohormones to plant roots and protect plants from fungal phytopathogens. The contents of indicator bacteria and heavy metals were analyzed to determine their environmental risk, and the results showed a high reduction in indicator bacteria and lower levels of heavy metals than in other feedstocks.     

Potential of existing policies of the Tokyo Metropolitan Government for implementing adaptation to climate change

The impacts of climate change are apparent in various regions of the world. Even though climate change may have a positive effect, it is anticipated that there will be many severely negative effects on human and natural resources in the future. Therefore, in addition to the need for stronger promotion of mitigation policies, it is urgently necessary to study and implement adaptation policies over the longer term to prepare for the possible negative impact of climate change. To implement climate change adaptation measures rapidly in Japan, it would seem practical and effective to make good use of the various countermeasures already promoted by both the national and the local governments for many sectors such as disaster prevention, environmental management, food production, and protection of the nation’s health. These countermeasures are considered to have potential for effecting climate change adaptation. This study, focusing on adaptation to climate change negative impacts, investigates to what extent the existing policies of the Tokyo Metropolitan Government could contribute to climate change adaptation, based on a comprehensive examination of targeted fields and indicators for which adaptation policies could be pursued. The results showed many of the existing policies could be useful for adaptation to climate change in many sectors. Furthermore, less than half of these policies need to take future climate change into account in order to contribute to climate change adaptation. This study proposes three basic steps that consider future climate change and local governmental propositions for the rapid implementation of adaptation policies in Japan.     

Action-Oriented Support for Occupational Safety and Health Programs in Some Developing Countries in Asia

Action-oriented support programs have been increasingly playing vital roles in promoting safety and health in developing countries in Asia. This paper studied achievements of 3 action-oriented support programs: the WISE program for small enterprises, the WIND program for farmers, and the POSITIVE program for workers and trade unions. Special attention was paid to how the programs have strengthened local efforts for sustainable actions in safety and health improvements. The results showed that there were significant achievements in action-oriented support programs in the region, including a large number of improvement examples, integration into government policies, and network support through employers’ and workers’ organizations. Participatory, action-oriented training tools such as action-checklists, local good example photos, and group work methods played key roles in the effective implementation of the programs. It was of note that there were a number of local efforts to extend the coverage of action-oriented support even to hard-to-reach workers such as home-based workers, rural workers, and ethnic minorities. The efforts included the equal participation in the training by female and male farmers, shortened and weekend training programs, photo sheets showing local good examples, and reasonable fee collection for better sustainability. In conclusion, action-oriented support programs provided local people with concrete means to promote safety and health improvements. The successful programs commonly focused on local initiatives and were built on local wisdom and resources.