The use of ultra filtration in trace metal speciation studies in sea water

During this work, size fractionation technique "ultra filtration" is used in speciation studies of trace elements in the coastal sea water. Filtration is the most commonly used method to fractionate trace metal species, but often only "dissolved" and "particulate" fraction. The purpose of the present study is to determine colloidal and suspended particulate concentrations of Fe, Zn, Cu, Ni, and Mn in sea water. Suspended particulate matter were separated in three different size groups namely (>2.7 microm, <2.7->0.45 microm and <0.45->0.22 microm) by suction filtration using cellulose acetate and nitrate filter membranes. Thereafter to concentrate the solution with colloidal particle <0.22 microm-1.1 nm (0.5 k Nominal Molecular Weight cut-off Limit {NMWL}), the solution obtained from filtration through <0.22 microm, is sequentially passed through the ultra-filtration membranes having pore diameters of 14 nm (300 k NMWL), 3.1 nm (50 k NMWL), 2.2 nm (30 k NMWL), 1.6 nm (10 k NMWL) and 1.1 nm (0.5 k NMWL) by using Stirred Ultra-filtration Cells, operating in concentration mode. The concentration of Fe, Zn, Cu, Ni, and Mn were measured in suspended and dissolved fraction by ion chromatography, ICP-AES and Atomic Absorption Spectrometer. The salinity of the solution in various dissolved fractions of sequential filtration varies between 30.89-34.22 parts per thousand. The maximum concentrations of colloidal Zn, Cu, Ni and Mn in dissolved fraction were in <2.2->1.6 nm fraction. In case of Fe, colloidal fractions <2.2->1.6 nm and <1.6-<1.1 nm shows higher concentration. The concentration of Zn, Cu, Ni and Mn increase with decrease in size in suspended particulate matter, while the reverse is observed in case of Fe. This size separation data that specifies the partitioning of metals between dissolved and suspended solid phases is necessary for developing physically based models of metal transport in aquatic system.     

Drinking water risk assessment in practice: the case of Swedish drinking water producers at risk from floods

To achieve a safe and reliable drinking water supply, water producers need to manage a large range of risks regarding both water quality and quantity. A risk management approach where risks are systematically identified and handled in a preventive manner is promoted by the World Health Organization and supported by researchers and drinking water experts worldwide. Risk assessment is an important part of such a management approach, and a variety of tools for risk assessment are described in the literature. There is, however, little knowledge of how drinking water risk assessment is performed in practice, including which tools that are actually used. This study investigates the use of risk assessment tools, and the approach to risk management, on a local level in the Swedish water sector. It is based on interviews with key persons from a targeted selection of water producers. We find that the application of tools as well as the approach to risk assessment and management differs considerably between the water producers. The tools most frequently used are mainly the ones promoted or required by Swedish national organizations. Although many of the water producers have done some kind of risk assessment, most have not implemented a risk management approach. Furthermore, their knowledge of the concepts of risk and risk management is often limited. The largest challenge identified is to prioritize risk assessment, so that it is actually performed and then used as a basis for managing risk in a systematic way.     

An improvement selection methodology for key performance indicators

Key performance indicators (KPIs) are critical measures for determining the health of a manufacturing plant in relationship to the plant’s goals. In today’s competitive environment, manufacturers cannot be careless about their business; in fact, they must ensure that their KPIs are effective and use them to make improvements when necessary. This paper describes a method for suggesting improvements to a manufacturer’s KPIs, based on the results achieved from a workshop to score the KPI on a number of predefined criteria. The approach uses a prospect theory approach to weight the scoring. Different problem formulations were derived that allow for both recommendations for improvements and the recommendations for disinvestments to over-performing KPIs. The authors applied the developed approach to two workshop outputs, each from independent manufacturers, and the results highlighted the significant difference between the two manufacturers in terms of improvement priorities and KPI assessment. The optimal improvement suggestions were compared to those found through a fast heuristic. It was determined that given the underlying assumptions of the approach that the heuristic solutions were just as adequate as the optimal ones.     

Key factors that influence households’ tree planting behaviour

Despite a decrease in indigenous forests and a growing demand for tree products in developing countries, tree planting activities are not considerably expanding in Tanzania. In this paper, we analyse factors that influence households’ tree planting behaviour, as well as the number of trees planted. Coast and Morogoro regions in the east of Tanzania were selected as the case, and data was gathered from 202 households in 11 villages in these regions where tree planting programmes have been or still are active. A Heckman model is used to analyse the factors that drive tree planting behaviour. Results indicate that households get wood energy from forest reserves (57%), in addition to their own planted trees (9.1%). Emperical findings show that the most important factors have significantly positive effects on households’ tree planting behaviour, as well as the extent to which it was implemented. These factors include households’ land sizes, households’ awareness of tree planting programmes, tree planting for wood energy, and the age of the head of the household. The right/freedom to harvest and transport tree products, households’ attitudes towards tree planting, and family size have significantly negative effects on households’ tree planting behaviour. This paper is perhaps the first comprehensive study to analyse the factors that influence households’ tree planting behaviour in Tanzania, and it uncovers results that are useful, even for other developing countries with similar conditions.     

Carbon emission reduction and cost–benefit of methane digester systems on hog farms in China

Three different sizes of hog farms were selected to analyze the carbon emissions reduction and the cost–benefit of three methane digester systems. The sizes of the digesters are 2,200, 2,200 and 800 m³, respectively. The sales of slaughter hogs from them are 50,000, 35,000 and 10,000 head, respectively. The carbon emissions reductions were 5,237, 4,017, and 1,334 tons, respectively. The results show that while the methane digester systems have a significant effect on carbon emissions reduction, it is difficult to operate the systems sustainably. If the carbon emissions reduction can be traded at high enough prices in the carbon offset markets, then the systems will be profitable and sustainable. Newly established China's domestic carbon offset market could provide this possibility, but more government support is needed. In addition, this study shows that scale economies make the digester adoption relatively more profitable for larger farms than smaller ones.     

Are national biodiversity strategies and action plans appropriate for building responsibilities for mainstreaming biodiversity across policy sectors? The case of Finland

The Convention on Biological Diversity's national biodiversity strategies and action plans (NBSAPs) are major mechanisms for mainstreaming biodiversity into national policies. This article examines whether and how the NBSAPs contribute to mainstreaming biodiversity across policy sectors in Finland in order to halt biodiversity loss. We have developed an innovative analytical framework where the concept of responsibility addresses how motivations for mainstreaming can be built, and the concept of social learning outcomes addresses the extent of institutional changes for biodiversity. The Finnish NBSAP processes have been able to build diverse forms of responsibility (liability, accountability, responsiveness and care) in different policy sectors by providing new knowledge, careful process design and developing institutional linkages. Despite pro-biodiversity outcomes in the targeted policy sectors, the responsibilities do not diffuse from the environmental administration to other policy sectors to a sufficient extent. Closing this ‘responsibility gap’ is a key challenge for building effective environmental policies.