Phosphate solubilizing actinomycetes in the estuarine environment: an inventory.

Sediment samples were collected from different stations of the Vellar estuary for isolation of total actinomycetes and phosphate solubilizing actinomycetes. Phosphatase activity in the sediments was also investigated Consistently a higher number of actinomycetes, phosphate solubilizing actinomycetes and phosphatase activity were recorded from the clay sediments than the sandy sediments at all the stations. In all, 7 strains showed positive phosphatase activity. Among them, one strain PS-3 exhibited good activity and was further investigated for optimum phosphorus solubilization at different pH (6, 6.5, 7, 7.5 and 8) and incubation (1st day to 20th day) periods. The solubilizing activity was maximum at the pH 7 and an incubation period of 13 days was required for an appreciable quantity of phosphorus to be leached into the medium. Based on the chemotaxonomical and conventional methods of identification, the strain PS-3 has been tentatively identified as Streptomyces galbus. The present study indicates that phosphatase enzyme and S. galbus along with other actinomycetes species would play a major role in solubilizing the phosphate in the estuarine ecosystem and increasing the soluble phosphate concentration thereby enhancing the productivity     

Formulation of a landfill pollution potential index to compare pollution potential of uncontrolled landfills

Generally speaking, landfilling is one of the prominent methods of waste disposal around the globe, but some under-developed and developing countries still continue to practice uncontrolled open dumping of waste. These uncontrolled landfills pose a relatively high threat to the various elements of the environment in comparison with the conventional engineered landfills that are used in many developed countries. However, some closed, un-engineered landfills do exist in developing countries. This paper presents a novel approach to compare the pollution potential of uncontrolled landfills using an index. The landfill pollution potential index (LPPI) has been developed using the Delphi technique and is an aggregation of six pollution indices that have already been developed for the quantification of different environmental elements. The LPPI is an increasing scale index, in which a higher index value indicates a higher pollution threat. The LPPI of a landfill in Delhi was calculated and the high LPPI value indicates that the respective landfill poses a significant threat to the environment. The LPPI can be used as an aid to diagnose a landfill's pollution potential relative to other landfills and therefore also to rank remediation investments.     

Utilization of molasses spentwash for production of bioplastics by waste activated sludge

Present study describes the treatment of molasses spentwash and its use as a potential low cost substrate for production of biopolymer polyhydroxybutyrate (PHB) by waste activated sludge. Fluorescence microscopy revealed the presence of PHB granules in sludge biomass which was further confirmed by fourier transform-infra-red spectroscopy (FT-IR) and ¹³C nuclear magnetic resonance (NMR). The processing of molasses spentwash was carried out for attaining different ratios of carbon and nitrogen (C:N). Highest chemical oxygen demand (COD) removal and PHB accumulation of 60% and 31% respectively was achieved with raw molasses spentwash containing inorganic nitrogen (C:N ratio = 28) followed by COD removal of 52% and PHB accumulation of 28% for filtered molasses containing inorganic nitrogen (C:N ratio = 29). PHB production yield (Y_p/s) was highest (0.184 g g^?1 COD consumed) for deproteinized spentwash supplemented with nitrogen. In contrast, the substrate consumption and product formation were higher in case of raw spentwash. Though COD removal was lowest from deproteinized spentwash, evaluation of kinetic parameters suggested higher rates of conversion of available carbon to biomass and PHB. Thus the process provided dual benefit of conversion of two wastes viz. waste activated sludge and molasses spentwash into value-added product-PHB.     

Formation of Soluble Complexes of Metals with Humic Acid and Its Environmental Significance

In order to investigate the role of functional groups present in humic acid(s) (HA) during complex formation, water soluble complexes between HA isolated from soil and metals (Pb, Ca, As, Ni, Cr, Co, Cu, Cd, Fe, Mn, Mg and Zn) were prepared and subjected to infrared (IR) spectroscopy. the IR data revealed the involvement of the - OH group of humic acid in complex formation with all metals except copper and arsenic, whereas the - COOH group of HA was found to be the preferred site of binding for all the metals. the significance of findings in relation to detoxification of environmental pollutants is discussed in this paper.     

A review of mesocosm experiments on heavy metals in marine environment and related issues of emerging concerns

Environmental Science and Pollution Research - Mesocosms are real-world environmental science tools for bridging the gap between laboratory-scale experiments and actual habitat studies on ecosystem...     

Effect of formaldehyde on biofilm activity and morphology in an ultracompact biofilm reactor for carbonaceous wastewater treatment.

The effects of formaldehyde on biofilm morphology and biomass activity were investigated in an ultracompact biofilm reactor (UCBR) for carbonaceous wastewater treatment. The wastewater contained a fixed amount of glucose (with a chemical oxygen demand concentration of 600 mg/L) and an increasing concentration of formaldehyde (ranging from 21.4 to 271.1 mg/L). An influent formaldehyde concentration higher than 75 mg/L could facilitate filamentous growth (on biofilm) control and lead to a higher biofilm density, which is desirable as it enhanced the UCBR performance stability. However, at an influent formaldehyde concentration higher than 214.4 mg/L, biomass production was inhibited and deteriorations of biofilm morphology and biomass activity were observed. This study showed that it was desirable to maintain an influent formaldehyde concentration lower than 202.2 mg/L, as this concentration could achieve a good biofilm morphology while not inhibiting its microbial activity.     

Exploration of Multifunctional Properties of Piper betel Leaves Extract Incorporated Polyvinyl Alcohol-Oxidized Maize Starch Blend Films for Active Packaging Applications

Journal of Polymers and the Environment - This study explains the development of eco-friendly polyvinyl alcohol (PVA)/oxidized maize starch (OMS)/Betel leaves extract (BLE) blend films by employing...     

Recent advancements in the challenges and strategies of globally used traffic noise prediction models

Environmental Science and Pollution Research - It is the need of an era to develop efficient traffic noise prediction models with optimum accuracy. In this context, the present work tries to...