One-pot wet ball-milling for waste wire-harness recycling

Journal of Material Cycles and Waste Management - In this study, we developed a one-pot wet ball-milling method for the recovery of highly pure copper wire, poly(vinyl chloride) (PVC) coating, and...     

Fluoride removal studies using virgin and Ti (IV)-modified Musa paradisiaca (plantain pseudo-stem) carbons

The preparation of carbons in virgin and Ti-modified forms under controlled conditions at low temperature from plantain pseudo-stem (Musa paradisiaca) was achieved. These prepared carbons were characterized for instrumental studies such as BET, FTIR, XRD, SEM with EDS and TGA to understand the chemistry and modification. The determination of IEP and pH_ZPC established the presence of positive surface sites on the virgin (VMPC) and Ti-modified (TiMPC) carbons to facilitate the sorption of fluoride. The fluoride removal efficiency as a function of time, pH, dose, initial fluoride concentration, temperature, and co-ion intervention was studied. The maximum fluoride removal of about 81.2 and 97.7% was achievable with VMPC and TiMPC, respectively, after 20 min at the pH of 2.04 and continued for the equilibrium of 60 min. Temperature was found to be influential both by way of initial increase followed by a decrease in the fluoride uptake of MPCs. Regeneration was very consistent up to 7 cycles with the residual fluoride concentration below the WHO guide line of 1.5 mg L^?1. Highest intervention due to hydrogen carbonate ions was observed during the fluoride removal process. Kinetic (pseudo-first-order, pseudo-second-order, and intra-particle diffusion) and isotherm models (Langmuir, Freundlich, and DKR) were checked for their compliance with the present sorption system. These low temperature synthesized MPCs are found to be effective candidates in the process of fluoride abatement in water.

     

Molecular structure of extracellular poly(3-hydroxybutyrate) depolymerase fromAlcaligenes faecalis T1

The amino acid sequence of a peptide containing an active serine was examined with poly(3-hydroxybutyrate) (PHB) depolymerase ofAlcaligenes faecalis T1. The sequence Cys-Asn-Ala-Trp-Ala-Gly-Ser-Asn-Ala-Gly-Lys was obtained. This amino acid sequence around the active serine does not fit any reported sequence of other esterases and proteases. On the other hand, a segment of the amino acid sequence of PHB depolymerase ofA. faecalis was homologous to the type III sequence of fibronectin. Similar sequences have been reported in some type of bacterial chitinase and cellulases, and PHB depolymerase seems to have an overall similarity to these bacterial extracellular hydrolases.     

Ion chromatographic determination of anions in rainwater

High acidity rainwater has recently become an issue in environmental pollution because of its great influence on ecological systems with special reference to the human environment. To solve this problem, the chemical behaviors of various pollutants in the air, particularly in the wet atmosphere must be studied. Ion chromatography was used for rapid analysis of trace amounts of anions.As a result, it was found that a combination of 2mM Na₂CO₃ and 5mM NaOH as an eluent was suitable for the separation of various anions. The reproducibility of determination of anions in standard solutions was found to be satisfactory with a coefficient of variation (CV) of 2–4% for F^?, Br^?, NO^?₃, SO^2?₃, SO^2?₄, and PO^3?₄, but not for NO^?₂. The determination of NO^?₂ was accomplished by preparing an eluent having almost the same composition and cencentration as that of the standard and sample solutions. The precision of the method with rainwater samples was less than 10%, and was considered to be usable for data analysis.In addition, a considerable number of ions in rainwater samples could be determined by using 1–3 ml of the sample without pretreatment. It was found that ion chromatography was one of the best means to obtain information on the chemical behaviors of trace amounts of anions in rainwater.     

Development of waste gasification and gas reforming system for municipal solid waste (MSW)

To achieve both high-efficiency power generation and high detoxification performance, advanced-type waste power generation plants such as pyrolysis and gas reforming plants are suggested. Further surveys on actual operational data of these plants are required in terms of reliability of the system when it is introduced to waste disposal sites. To verify the technical effectiveness of advanced-type waste power generation using the pyrolysis and gas reforming method, we evaluated 10?tons/day of municipal solid wastes (MSW) treated in a demonstration plant. A demonstration test was conducted over 100?days including 35?consecutive days of operation treating MSWs. The test results show high recycling performance and harmless nature of the plant which proves it to be an excellent waste recycling system. Major test results are as follows: (1) stabilization of waste treatment is possible with the wastes of various qualities, (2) clean gas is produced from the waste whose energy recovery ratio is approximately 40?%. (3) 99.3?% weight % of dried waste are recovered as valuable materials such as clean gas, char and metal, (4) total amount of dioxin emission to the outside of the plant is very small, down to 0.0051–0.018?μg?TEQ per ton waste.     

Hydrolysis of <Emphasis Type="Italic">Sasa senanensis</Emphasis> culm with dilute sulfuric acid for production of a fermentable substrate

To prepare a substrate for microbial conversion of xylose into xylitol, the culm of Sasa senanensis was hydrolyzed with dilute sulfuric acid. When the reaction temperature was fixed at 121°C, an optimum yield of xylose was obtained by treatment with 2% sulfuric acid for 1 h. An increase in the sulfuric acid concentration or a prolonged reaction time resulted in a decrease in the xylose yield. A fermentable substrate with a relatively high xylose concentration (36.7 g l⁻¹) was obtained by hydrolysis with 2% sulfuric acid with a liquid-to-solid ratio of 5 g g⁻¹. During hydrolysis at elevated temperatures, certain undesired byproducts were also generated, such as degradation products of solubilized sugars and lignin, which are potential inhibitors of microbial metabolism. These compounds were, however, successfully removed from the hydrolysate by treatment with activated char.     

Mechanochemical dechlorination of polyvinyl chloride with calcium sulfates

Polyvinyl chloride (PVC) was milled with hydrated or unhydrated calcium sulfates (CaSO₄·2H₂O or CaSO₄) in air by using a planetary mill to investigate mechanochemical dechlorination behavior. The milling process resulted in size reduction and in the breaking of bonds leading to mechanically induced solid state reaction, forming CaCl₂ and dechlorinated hydrocarbon with C=C double bonds in the product. Washing the milled mixtures with water at room temperature allowed removal of the chloride formed during milling, and more than 95% of the chlorine in PVC was removed from a mixture milled for 4 h. This process could offer a potential route for the handling and disposal of both PVC and gypsum wastes. H₂S gas was generated during milling; more H₂S was released from the unhydrated sample than from the hydrated sample.     

Combined biological and photocatalytic treatment for the mineralization of phenol in water

Phenol is degraded by biological treatment, however mineralization requires long time. To decrease the time and operational cost necessary for the mineralization of phenol, an optimum operation condition of the combined biological–photocatalytical treatment was investigated. The mineralization of phenol (50 mg l⁻¹) was conducted in a flow-type biomembrane tank combined with a batch-type TiO₂-suspended photocatalytic reactor. Phenol was degraded biologically to the concentration of 6.8 mg l⁻¹, an effective concentration for further photocatalytic treatment. After the biological treatment, the biotreated phenol was treated photocatalytically to complete the mineralization of phenol. The combined treatment shortened the mineralization time compared to the biological treatment and electric cost compared to the photocatalytic treatment only. The combined treatment may be suitable for a short-time mineralization of phenol in wastewater.     

Regimes of human and climate impacts on coastal changes in Vietnam

Vietnam is a tropical to subtropical country located on the eastern Asian coast where the Red (Song Hong) and Mekong rivers discharge into the sea. The catchments of these two transboundary rivers cover parts of six countries, and their water and sediment discharges greatly influence the coastal seas of Vietnam. The impact of human activities include changes in the supply and distribution of water, sediments, and nutrients; changes in the relationships and balance among dynamically interacting factors and processes; and changes in the quality of the coastal and marine environments due to the increased use and accumulation of pollutants and the loss of habitats. These impacts have resulted in increasing unpredictability and severity of coastal problems such as floods, erosion, sedimentation, and saltwater intrusion; environmental pollution; and the degradation of ecosystems, with accompanying decrease in biodiversity and fishery productivity.