Seasonal development of ozone-induced foliar injury on tall milkweed (Asclepias exaltata) in Great Smoky Mountains National Park

The goals of this study were to document the development of ozone-induced foliar injury, on a leaf-by-leaf basis, and to develop ozone exposure relationships for leaf cohorts and individual tall milkweeds (Asclepias exaltata L.) in Great Smoky Mountains National Park. Plants were classified as either ozone-sensitive or insensitive based on the amount of foliar injury. Sensitive plants developed injury earlier in the season and to a greater extent than insensitive plants. Older leaf cohorts were more likely to belong to high injury classes by the end of each of the two growing seasons. In addition, leaf loss was more likely for older cohorts (2000) and lower leaf positions (2001) than younger cohorts and upper leaves, respectively. Most leaves abscised without prior ozone-like stippling or chlorosis. Failure to take this into account can result in underestimation of the effects of ozone on these plants.     

Selected ion chromatograms and tandem mass spectrometry for detection of trace polycyclic aromatic hydrocarbons in diesel exhaust

Polycyclic aromatic hydrocarbon (PAH) measurements are essential for scientists and engineers who investigate these anthropogenic compounds. Diesel engines contribute to the problem, so analysts are measuring PAHs from these sources. However, diesel exhaust presents special problems for precise analytical measurements. The exhaust matrix is very complex; consequently, PAH detection sensitivity deteriorates, especially for trace PAHs in the exhaust. Yet, these are conditions and amounts that exist in real samples. Nonetheless, selected ion chromatogram (SIC) and tandem mass spectrometry (MS/MS) techniques improve trace PAH detection; ion trap technology makes both mass techniques possible. The purpose of this investigation was to evaluate SIC and MS/MS for applications to measure PAHs in diesel exhaust samples. The signal-to-noise ratio for accurate quantitation improves, relative to traditional mass techniques, because these techniques ignore or eliminate interfering components. On a VF-5MS chromatographic column, these techniques improve sensitivity and reproducibility. They produce a superior limit of detection in the useful range for PAH samples extracted from actual engine exhaust, 10-30 pg for the smaller PAHs and 1-6 ng for the larger PAHs. The results with SIC and MS/MS are reproducible, so analysts can report PAH amounts with defined statistical confidence intervals. SIC and MS/MS improve detection for trace PAHs in convoluted diesel exhaust samples.     

Evaluation of the flexibility of protective gloves.

Two mechanical methods have been developed for the characterization of the flexibility of protective gloves, a key factor affecting their degree of usefulness for workers. The principle of the first method is similar to the ASTM D 4032 standard relative to fabric stiffness and simulates the deformations encountered by gloves that are not tight fitted to the hand. The second method characterizes the flexibility of gloves that are worn tight fitted. Its validity was theoretically verified for elastomer materials. Both methods should prove themselves as valuable tools for protective glove manufacturers, allowing for the characterization of their existing products in terms of flexibility and the development of new ones better fitting workers' needs.     

Integrated environmental assessment of biodiesel production from soybean in Brazil

This paper presents the results of an environmental impact assessment of biodiesel production from soybean in Brazil. In order to achieve this objective, environmental impact indicators provided by Emergy Accounting (EA), Embodied Energy Analysis (EEA) and Material Flow Accounting (MFA) were used. The results showed that for one liter of biodiesel 8.8 kg of topsoil are lost in erosion, besides the cost of 0.2 kg of fertilizers, about 5.2 m² of crop area, 7.33 kg of abiotic materials, 9.0 tons of water and 0.66 kg of air and about 0.86 kg of CO₂ were released. About 0.27 kg of crude oil equivalent is required as inputs to produce one liter of biodiesel, which means an energy return of 2.48 J of biodiesel per Joule of fossil fuel invested. The transformity of biodiesel (3.90E + 05 seJ J^?1) is higher than those calculated for fossil fuels as other biofuels, indicating a higher demand for direct and indirect environmental support. Similarly, the biodiesel emergy yield ratio (1.62) indicates that a very low net emergy is delivered to consumers, compared to alternatives. Obtained results show that when crop production and industrial conversion to fuel are supported by fossil fuels in the form of chemicals, goods, and process energy, the fraction of fuel that can actually be considered renewable is very low (around 31%).     

Hazardous Air Pollutants (HAPs) and their Effects on Biodiversity: An Overview of the Atmospheric Pathways of Persistent Organic Pollutants (POPs) and Suggestions for Future Studies

Atmospheric change comprises many phenomena, namely climate change, acidic deposition, stratospheric ozone depletion, SMOG, increasing trend of suspended particulate matter, and hazardous air pollutants (HAPs). Among HAPs, a particular group of Persistent Organic Pollutants (POPs), such as some organochlorine pesticides, has shown a variety of toxic effects, altering the biodiversity of many ecosystems. Because of their persistence in the environment, and of their long range transport, the study of the global cycle of POPs is important in understanding how they can affect biodiversity. This can be accomplished by coupling different approaches: toxicity and ecological studies, emission estimates, and the use of global models.     

Key factors in levels of public satisfaction with urban waste collection in a northern Spain city

Journal of Material Cycles and Waste Management - Levels of public satisfaction among the inhabitants of Burgos with their urban waste collection service are analyzed by comparing satisfaction...     

The Adaptation for Conservation Targets (ACT) Framework: A Tool for Incorporating Climate Change into Natural Resource Management

As natural resource management agencies and conservation organizations seek guidance on responding to climate change, myriad potential actions and strategies have been proposed for increasing the long-term viability of some attributes of natural systems. Managers need practical tools for selecting among these actions and strategies to develop a tailored management approach for specific targets at a given location. We developed and present one such tool, the participatory Adaptation for Conservation Targets (ACT) framework, which considers the effects of climate change in the development of management actions for particular species, ecosystems and ecological functions. Our framework is based on the premise that effective adaptation of management to climate change can rely on local knowledge of an ecosystem and does not necessarily require detailed projections of climate change or its effects. We illustrate the ACT framework by applying it to an ecological function in the Greater Yellowstone Ecosystem (Montana, Wyoming, and Idaho, USA)-water flows in the upper Yellowstone River. We suggest that the ACT framework is a practical tool for initiating adaptation planning, and for generating and communicating specific management interventions given an increasingly altered, yet uncertain, climate.     

Secondary organic aerosol formation from ozone-initiated reactions with nicotine and secondhand tobacco smoke

We used controlled laboratory experiments to evaluate the aerosol-forming potential of ozone reactions with nicotine and secondhand smoke. Special attention was devoted to real-time monitoring of the particle size distribution and chemical composition of SOA as they are believed to be key factors determining the toxicity of SOA. The experimental approach was based on using a vacuum ultraviolet photon ionization time-of-flight aerosol mass spectrometer (VUV-AMS), a scanning mobility particle sizer (SMPS) and off-line thermal desorption coupled to mass spectrometry (TD-GC-MS) for gas-phase byproducts analysis. Results showed that exposure of SHS to ozone induced the formation of ultrafine particles (<100 nm) that contained high molecular weight nitrogenated species (m/z 400–500), which can be due to accretion/acid–base reactions and formation of oligomers. In addition, nicotine was found to contribute significantly (with yields 4–9%) to the formation of secondary organic aerosol through reaction with ozone. The main constituents of the resulting SOA were tentatively identified and a reaction mechanism was proposed to elucidate their formation. These findings identify a new component of thirdhand smoke that is associated with the formation of ultrafine particles (UFP) through oxidative aging of secondhand smoke. The significance of this chemistry for indoor exposure and health effects is highlighted.     

Autochthonous clams monitoring of Ganzirri Lake (Sicily)

Two autochthonous clams, Venerupis aurea laeta and Cerastoderma edule/glaucum, collected for a period of 1 year, from May 2007 to January 2008, were studied in the Cape Peloro lagoon. On the samples, it was evaluated the presence of pathogenic microorganisms and proteins, lipids and yield edible part were determined. It was evaluated the concentration of mineral elements (Cd, Cu, Mn, Se, Pb, Zn) and organic contaminants (∑DDT and PCBs). Salmonella is never present in any sample. Total and faecal coliform values have always been under law limits for alive bivalves mussels production and sale. Zn, Cu, Cd and Pb levels were found in clams where they are slightly lower too. Both species do not show significant changes for Mn and Se. DDT and PCBs traces were discovered in Ganzirri Lake’ samples, but in all observed cases, they were below law limits. As a result of all these observations, it is clear that, in recent years, the bivalve’s use of Ganzirri Lake does not denote toxicological risk to human health.     

The trace element content of top-soil and wild edible mushroom samples collected in Tuscany, Italy

The amount of the trace elements As, Ba, Cd, Cr, Cu, Hg, Li, Mn, Ni, Pb, Rb, Se, Sr, and Zn was measured in top soils and edible mushrooms, Boletus edulis, Macrolepiota procera, collected at five distinct green microhabitats inside the Lucca province, North-Central Italy (years 2008–2009). Results showed a top soil element content within the Italian statutory limits. Concerning the amount of mushroom elements, we observed significant species-differences obtaining higher levels of Ni, Rb, and Se in B. edulis or As, Pb, Cu in M. procera. Bioaccumulation factors (BCFs: element in mushroom/element in soil) resulted species-dependent and element-selective: in particular, B. edulis preferentially accumulated Se (BCFs varying from 14 to 153), while M. procera mainly concentrated Cu (BCFs varying from 5 to 15). As well, both species displayed between-site BCF differences. By a multivariate principal component approach, cluster analysis (CA), we could resolve two main clusters of soil element composition, corresponding to the most ecologically divergent sites. Besides, CA showed no cluster relating to element contents of B. edulis at the different collection sites, while a separation in groups was found for M. procera composition with respect to harvesting locations, suggesting uptake systems, in this saprotrophic species, sensitive to microhabitat. Regarding consumer safety, Cd, Hg, Pb levels resulted sometime relevant in present samples, never reaching values from current literature on mushrooms collected in urban-polluted areas. Our findings encourage a deeper assessment of the molecular mechanisms of metal intake by edible mushrooms, encompassing genetic biochemical and geo-ecological variables, with particular awareness to element bioavailability in soils and fungi.