Feasibility of mercury removal from simulated flue gas by activated chars made from poultry manures

Increased emphasis on reduction of mercury emissions from coal fired electric power plants has resulted in environmental regulations that may in the future require application of activated carbons as mercury sorbents for mercury removal. At the same time, the quantity of poultry manure generated each year is large and technologies that take advantage of the material should be explored. The purpose of the work was to obtain preliminary data to investigate if activated chars made from different poultry manures could adsorb mercury from simulated flue gas. In laboratory experiments, activated chars made from chicken cake and litter removed mercury from the gas as well as a commercial alternative. It was also found that acid-washing these chars after activation may improve pore structure but does not influence the mercury removal efficiency. Activated chars were also made from turkey cake and litter. These raw materials produced activated chars with similar pore structure as those made from chicken manure, but they did not adsorb mercury as well. Acid-washing the turkey manure-based chars improved their performance, but this step would add to the cost of production. Preliminary evaluations suggest that unwashed activated chars may cost as little as $0.95/kg to produce.     

APPLICATION OF ENHANCED ANNEALING TO GROUND WATER REMEDIATION DESIGN1

ABSTRACT: A methodology for ground water remediation design has been developed that interfaces ground water simulation models with an enhanced annealing optimizer. The ground water flow and transport simulators provide the ability to consider site‐specific contamination and geohydrologic conditions directly in the assessment of alternative remediation system designs. The optimizer facilitates analysis of tradeoffs between technical, environmental, regulatory, and financial risks for alternative design and operation scenarios. A ground water management model using an optimization method referred to as “enhanced annealing” (simulated annealing enhanced to include “directional search” and “memory” mechanisms) has been developed and successfully applied to an actual restoration problem. The demonstration site is the contaminated unconfined aquifer referred to as N‐Springs located at Han‐ford, Washington. Results of the demonstration show the potential for improving groundwater restoration system performance while reducing overall system cost.     

Effects of feed-supplementation and hide-spray application of two sources of tannins on enteric and hide bacteria of feedlot cattle

Pathogenic bacteria attached to the hide or shed in the feces of cattle at slaughter can contaminate carcasses intended to be processed for human consumption. Therefore, new pre-harvest interventions are needed to prevent the carriage and excretion of foodborne pathogens in cattle presented to the processing plant. The objectives of this study were to examine the antimicrobial effects of hydrolysable tannin-rich chestnut and condensed tannin-rich mimosa extracts on bacterial indicators of foodborne pathogens when applied as a hide-intervention and as a feed additive to feedlot cattle. Water (control) or solutions (3 % wt/vol) of chestnut- and mimosa-extract treatments were sprayed (25 mL) at the left costal side of each animal to a 1000 cm² area, divided in four equal quadrants. Hide-swabs samples obtained at pre-, 2-min, 8-h, and 24-h post-spray application were cultured to enumerate Escherichia coli/total coliforms and total aerobic plate counts. In a second experiment, diets supplemented without (controls) or with (1.5 % of diet dry matter) chestnut- or mimosa-extracts were fed during a 42–day experimental feeding period. Weekly fecal samples starting on day 0, and rumen fluid obtained on days 0, 7, 21 or 42 were cultured to enumerate E.coli/total coliforms and Campylobacter. Tannin spray application showed no effect of treatment or post-application-time (P> 0.05) on measured bacterial populations, averaging 1.7/1.8, 1.5/1.6 and 1.5/1.7 (log₁₀ CFU/cm²) for E. coli/total coliforms, and 4.0, 3.4 and 4.2 (log₁₀CFU/cm²) in total aerobes for control, chestnut and mimosa treatments, respectively. Mean (± SEM) ruminal E. coli and total coliform concentrations (log₁₀ CFU/mL) were reduced (P< 0.01) in steers fed chestnut-tannins (3.6 and 3.8 ± 0.1) in comparison with the controls (4.1 and 4.2 ± 0.1). Fecal E. coli concentrations were affected by treatment (P< 0.01), showing the highest values (log₁₀ CFU/g) in fecal contents from mimosa-fed steers compared to controls (5.9 versus 5.6 ± 0.1 SEM, respectively). Total coliforms (log CFU/g) showed the highest values (P< 0.01) in feces from chestnut- and mimosa-fed steers (6.0 and 6.1 ± 0.1 respectively) in comparison with controls (5.7 ± 0.1). Fecal Campylobacter concentrations (log₁₀CFU/g) were affected by treatment (P< 0.05), day (P< 0.001) and their interaction (P< 0.01) with the controls having lower concentrations than chestnut- and mimosa-fed steers (0.4, 1.0, and 0.8 ± 0.3, respectively). It was concluded that under our research conditions, tannins were not effective in decreasing measured bacterial populations on beef cattle hides. Additionally, chestnut tannin reduced E. coli and total coliforms within the rumen but the antimicrobial effect was not maintained in the lower gastrointestinal tract. Further research is necessary to elucidate the possible antimicrobial effects of tannins at site-specific locations of the gastrointestinal tract in beef cattle fed high-grain and high-forage diets.     

Microbial degradation of poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) in compost

The microbial degradation of tensile test pieces made of poly(3-hydroxybutyrate) [P(3HB)] or copolymers with 10% [P(3HB-co-10%3HV)] and 20% [P(3HB-co-20%3HV)] 3-hydroxyvaleric acid was studied in small household compost heaps. Degradation was measured through loss of weight (surface erosion) and changes in molecular weight and mechanical strength. It was concluded, on the basis of weight loss and loss of mechanical properties, that P(3HB) and P(3HB-co-3HV) plastics were degraded in compost by the action of microorganisms. No decrease inM _w could be detected during the degradation process. The P(3HB-co-20%3HV) copolymer was degraded much faster than the homopolymer and P(3HB-co-10%3HV). One hundred nine microbial strains capable of degrading the polymersin vitro were isolated from the samples used in the biodegradation studies, as well as from two other composts, and identified. They consisted of 61 Gram-negative bacteria (e.g.,Acidovorax facilis), 10 Gram-positive bacteria (mainlyBacillus megaterium), 35Streptomyces strains, and 3 molds.     

A user evaluation of biodegradable cutlery

This paper summarizes a study evaluating the acceptance and perceived performance of disposable cutlery made from starch-based biodegradable resins relative to nondegradable polystyrene cutlery. Two hundred forty-three sailors onboard three U.S. Navy vessels ate their lunch using either biodegradable cutlery made with resins manufactured by one of two commercial companies or polystyrene cutlery. The cutlery was rated on several sensory and performance dimensions as well as for overall acceptability. Results indicated that sailors rated both the biodegradable and the polystyrene utensils as easy to hold. There were also no differences in the perceived ease of using each of the spoons. However, compared to the polystyrene utensils, both types of biodegradable utensils were viewed as less sturdy, as having a less attractive color, and as being less acceptable overall. The biodegradable forks and knives were also rated as more difficult to use for piercing and cutting food than the polystyrene ones. In addition, several significant differences emerged between the two types of biodegradable cutlery. The results are discussed in terms of the need for continued consumer testing of products developed from biodegradable polymeric materials.     

Perceptions of the security and attractiveness of urban parking lots

This study concerns design features of urban parking lots which can increase the perception of such areas as both safe and attractive. College students evaluated the attractiveness and perceived security associated with 180 scenes of parking lots adjacent to commercial and multi-family residential structures in Atlanta and Athens, Georgia, U.S.A. High intergroup correlations (r > 0·90) indicated the reliability of evaluations of both perceived features. Regressions of physical features on perceived security ratings and attractiveness ratings yielded highly predictive models (R² = 0·76 and 0·80, respectively). For both sets of ratings a Maintenance and Design factor accounted for the most variance. Although attractiveness ratings were higher as the total amount of vegetation increased in a scene, security was in general rated higher only when vegetation was well maintained and appeared to be installed as part of a landscape design. Attractiveness was generally higher for multi-family residential scenes than for commercial scenes. Perceived security was higher for frontal views of structures, especially when entrances were proximate to the viewer. Research implications are discussed in terms of the impact of natural features in urban areas for increasing attractiveness and reducing fear of crime.     

A view from the periphery

The author describes his background and relationship to the behavioral geography revolution at Clark. Key events included the independent invention of ‘turf maps’, the Place Perception Project of Blaut, Stea and McCleary, and the synergy of an exceptional cluster of faculty and students. The influence of the revolution on the author's own research has resulted in a radical redirection of effort toward applied research on children's environmental behavior, geographic learning, and participatory design methods in particular.     

Covariance structure modeling in organizational research: Problems with the method versus applications of the method

Brannick (1995) offers several criticisms of how covariance structure analysis techniques (CSA—also known as causal modeling methods) are being used by organizational researchers, as well as some suggestions for improving organizational research. This article responds to some of the issues raised by Brannick (1995), points out areas of agreement and disagreement, and offers some reactions to his suggestions for how future use of CSA methods can be improved.     

Large-scale constructed wetlands for nutrient removal from stormwater runoff: An everglades restoration project

The South Florida Water Management District (SFWMD) constructed a wetland south of Lake Okeechobee to begin the process of removing nutrients (especially phosphorus) from agricultural stormwater runoff entering the Everglades. The project, called the Everglades Nutrient Removal (ENR) project, is a prototype for larger, similarly constructed wetlands that the SFWMD will build as part of the Everglades restoration program. This innovative project is believed to be one of the largest agricultural stormwater cleanup projects in the United States, if not in the world. This publication describes the ENR project's design, construction, and proposed operation, as well as the proposed research program to be implemented over the next few years.     

PHOSPHORUS MANAGEMENT TO PROTECT LAKE WATER QUALITY1

ABSTRACT: The Hallett Quarry gravel pit lakes are an active sand and gravel extraction operation located 0.4 km north of the City of Ames, Iowa. During periods of drought, these lakes serve as a supplemental water supply for Ames. A modified version of the Vollenweider input-output model was used to predict future water quality under various watershed land use, drainage, and lake configurations. The dominant factor controlling the future water quality of the lakes was found to be the nutrient input. It is recommended that a management plan to protect the future water quality should be oriented towards reducing the sources of phosphorus to the lakes.