Comparison of four different methods for reliability evaluation of ecotoxicity data: a case study of non-standard test data used in environmental risk assessments of pharmaceutical substances

Part 2 presents measures at the city scale, which are distinguished into object- and area-related means. The former ones include emission reduction, energy gaining and saving, as well as the climate-improving impact of rooftop and façade greening. Area-related means refer to the reduction of radiation temperature through shading and transpiration as well as impact of urban green areas of different size on the urban climate. Furthermore the opportunities to use subsurface urban heat island as an energy-reservoir for cooling or heating are discussed.     

Multicriteria Decision Aid in Supporting Decisions Related to Groundwater Protection

In the recent decades, there have been frequent conflicts between groundwater resources and environmentally hazardous activities. An example is the construction of the new highway through the important glaciofluvial esker aquifer Nybroåsen, which passes the protection zone of the water supply for the Kalmar municipality, in the southeastern part of Sweden. The decision to build the new road through this important aquifer has been strongly questioned by the municipality and the public because the value of the water resources in Nybroåsen was not taken into consideration during the first phase of the decision-making process. Multicriteria decision aid (MCDA) is applied as a tool to structure and analyze the four road alternatives proposed in the environmental impact assessment for the above conflict. The alternatives, including the existing road, are in conflict with water resources, agriculture, natural, and cultural values. The impacts on the water resources have been predicted by a two-dimensional physically based time-variant flow and solute groundwater model, which has been calibrated and evaluated. The MCDA illustrates how it can be used to identify (1) actors and their concerns, (2) ranking of alternative road scenarios according to actors preferences, and (3) coalition groups of actors, i.e., groups that have similar views with regard to the road alternatives. The analysis shows that the two best compromise solutions obtained in the MCDA were unacceptable by the strongest coalition group, showing that either the family of criteria was not well chosen or new alternatives should have been developed.     

Model of the Long-Term Transport and Accumulation of Radionuclides in Future Landscapes

Assessments of radiological impacts on humans and other biota from potential releases to the biosphere from a deep geologic repository for spent nuclear fuel are associated with several challenges. Releases, if any, will likely occur in a far future and to an environment that will have experienced substantial transformations. Such releases would occur over very long periods during which environmental conditions will vary continuously due to climate change and ecosystem succession. Assessments of radiological impacts must therefore be based on simulations using models that can describe the transport and accumulation of radionuclides for a large variety of environmental conditions. In this paper we describe such a model and show examples of its application in a safety assessment, taking into account results from sensitivity and uncertainty analyses of the model predictions.     

Species- and age-related variation in metal exposure and accumulation of two passerine bird species

We measured the concentration of several elements (arsenic [As], calcium [Ca], cadmium [Cd], copper [Cu], nickel [Ni], lead [Pb], selenium [Se] and zinc [Zn]) in adult and nestling pied flycatchers (Ficedula hypoleuca) and great tits (Parus major) at different distances to a Cu-Ni smelter in 2009. Feces of nestlings generally failed to correspond with internal element concentrations but reflected the pollution exposure, indicating an increased stress by removal of excess metals. The uptake of Cu and Ni were regulated, but As, Cd, Pb and Se accumulated in liver tissue. Pied flycatchers had generally higher element concentrations than great tits. The higher accumulation of As and Pb in pied flycatcher livers was explained by a more efficient absorption, whereas the higher Cd concentration was primarily due to different intake of food items. Age-related differences occurred between the two species, though both Cd and Se accumulated with age.     

Radiosynthesis of perfluorooctanesulfonate (PFOS) and perfluorobutanesulfonate (PFBS), including solubility, partition and adhesion studies

Here, we describe for the first time the synthesis of [³⁵S] PFOS and [³⁵S] PFBS with sulfur-35 enriched sulfur dioxide as the radiolabelled reagent, resulting in 2.5 and 2.3 mCi of product, respectively. Basic information concerning the physicochemical properties of perfluorooctanesulfonate (PFOS), perfluorobutanesulfonate (PFBS) and perfluorooctanoic acid (PFOA) are still limited. Hence, we utilized these radiolabelled perfluoroalkanesulfonates (PFSAs), as well as carbon-14 labelled perfluorooctanoic acid ([¹⁴C] PFOA) to determine some basic characteristics of physiological and experimental significance.The solubility of PFOS in buffered aqueous solutions at pH 7.4 was found to be severely reduced in the presence of potassium and sodium ions, which, however, did not reduce the solubility of PFOA or PFBS. PFOS was found to adhere to a small extent to polypropylene and polystyrene, whereas no such adhesion of PFOA or PFBS was detected. The extents of adhesion of PFOS and PFOA to glass were found to be 20% and 10%, respectively. For the first time, the partition coefficients for PFOS, PFBS and PFOA between n-octanol and water were determined experimentally, to be −0.7, −0.3, and 1.4, respectively, reflecting the difference in the amphiphilic natures of these molecules.     

Decreased PCDD/F formation when co-firing a waste fuel and biomass in a CFB boiler by addition of sulphates or municipal sewage sludge

Polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) are formed during waste incineration and in waste-to-energy boilers. Incomplete combustion, too short residence times at low combustion temperatures (<700 °C), incineration of electronic waste and plastic waste containing chlorine are all factors influencing the formation of PCDD/Fs in boilers. The impact of chlorine and catalysing metals (such as copper and iron) in the fuel on PCDD/F formation was studied in a 12 MW_th circulating fluidised bed (CFB) boiler. The PCDD/F concentrations in the raw gas after the convection pass of the boiler and in the fly ashes were compared. The fuel types were a so-called clean biomass with low content of chlorine, biomass with enhanced content of chlorine from supply of PVC, and solid recovered fuel (SRF) which is a waste fuel containing higher concentrations of both chlorine, and catalysing metals. The PCDD/F formation increased for the biomass with enhanced chlorine content and it was significantly reduced in the raw gas as well as in the fly ashes by injection of ammonium sulphate. A link, the alkali chloride track, is demonstrated between the level of alkali chlorides in the gas phase, the chlorine content in the deposits in the convection pass and finally the PCDD/F formation. The formation of PCDD/Fs was also significantly reduced during co-combustion of SRF with municipal sewage sludge (MSS) compared to when SRF was fired without MSS as additional fuel.     

Pharmaceutical management through environmental product labeling in Sweden

There is an increased awareness that medicinal products for human use may cause negative effects in the environment. In Sweden a voluntary environmental classification system for drugs has been established in collaboration between producers, authorities and the public health care, and used for five years. The idea is to enhance the market demand for medicines with less environmental impact, which in turn will stimulate the producers to design future medicines to be more environmentally friendly. The system is open to the public and based on assessment of the active ingredient in the medicinal product into several classes of risk and hazard, respectively. It is closely related to the EMEA guidelines. Risk is expressed as the ratio between the predicted environmental concentration (PEC) of the active ingredient (AI) and its predicted no effect concentration (PNEC). The hazard is expressed in terms of the AI's persistence, potential to bioaccumulation, and eco-toxicity. Drug data for the classification are delivered by the respective producers.Hitherto more than 300 AI, representing more than 50% of the Swedish volume of drug use, have been classified. Data for risk assessment were missing in 47% of AI. Among drugs with data 7% had a PEC/PNEC ratio > 1, and another 7% had a ratio between 0.1 and 1. The AIs with highest ratio (> 10) were two estrogens. Data for hazard assessment were lacking in 16% of the AI. Among drugs with environmental data 92% were not ready biodegradable, 23% had potential to bioaccumulation, and 61% were toxic to aquatic organisms at a concentration below 1 mg/l. These data are utilized by regional pharmaceutical expert groups when selecting substances to be recommended in public health care in Sweden. They may also be used by prescribing doctors who want to identify the environmentally most favourable substance among several with equivalent medical effect.We conclude that environmental data on human medicinal products are often missing, or reveal unfavourable environmental properties. A proper judgement of the environmental impact of an AI requires a joint evaluation of its risk and hazard. We suggest that the pharmaceutical producers should highlight environmental precaution when designing new AIs, and that the environmental data should be transparent to the general public.