Characteristics of steel slag under different cooling conditions

Four types of steel slags, a ladle slag, a BOF (basic oxygen furnace) slag and two different EAF (electric arc furnace) slags, were characterized and modified by semi-rapid cooling in crucibles and rapid cooling by water granulation. The aim of this work was to investigate the effect of different cooling conditions on the properties of glassy slags with respect to their leaching and volume stability. Optical microscopy, X-ray diffraction, scanning electron microscope and a standard test leaching (prEN 12457-2/3) have been used for the investigation. The results show that the disintegrated ladle slag was made volume stable by water granulation, which consisted of 98% glass. However EAF slag 1, EAF slag 2 and the BOF slag formed 17%, 1% and 1% glass, respectively. The leaching test showed that the glass-containing matrix did not prevent leaching of minor elements from the modified slags. The solubility of chromium, molybdenum and vanadium varied in the different modifications, probably due to their presence in different minerals and their different distributions.     

Phytoplankton exudate release as an energy source for the growth of pelagic bacteria

The release of dissolved organic carbon (DOC) from phytolankton during photosynthesis, and the utilization of this carbon by planktonic bacteria, was studied using ¹⁴CO₂ and selective filtration. Natural sea water samples from a coastal area of the Northern Baltic Sea were incubated in the laboratory for detailed studies, and in situ for estimation of annual dynamics. In a laboratory incubation (at +1°C) the concentration of ¹⁴C-labelled dissolved organic carbon increased for about 2 h and then reached a steady state, representing about 0. 1% of the total DOC. Labelled organic carbon in the phytoplankton and bacterial fractions continued to increase almost linearly. The continuous increase in the bacterial fraction is thought to represent almost instantaneous utilization of the DOC released from the phytoplankton during photosynthesis. As an annual average, in 4 h in situ incubations, about 65% of the labelled organic carbon was found in the phytoplankton fraction (>3 m), about 27% in the bacterial fraction (0.2 to 3 m) and the remaining 8% as DOC (<0.2 m). Large variations in these percentages were recorded. The measured annual primary production was 93 g C m^-2 (March to December), and the estimated bacterial production due to phytoplankton exudates 29 g C m^-2. This represents a release of DOC of about 45% of the corrected annual primary production of 110 g C m^-2 (assuming a bacterial growth efficiency of 0.6).     

Dealing with uncertainty: a case study of controlling insect populations in natural ecosystems

This paper analyses the political process for handling an outbreak of an insect causing human allergic reactions. In the southern part of the Swedish island Gotland in the Baltic Sea, an outbreak of the northern pine processionary moth, Thaumetopoea pinivora, has occurred. With regard to the human nuisance and long-term effects on the tourist industry, demands have been raised for intervention to reduce and control the insect population. At the same time, there have been warnings against treating the insect population because there are knowledge gaps concerning the wider ecological consequences, including effects on biodiversity. This paper analyses the political process and its problem-solving efforts. Of particular interest is how it dealt with the issue of uncertainty. It was found that the uncertainty associated with the issue hindered the development of a shared understanding of the problem and a possible solution. There seems to be a growing need in society to develop the institutional capacity to handle complex issues that cross different sectors, regulatory frameworks and policy targets.     

Comprehensive Study Regarding Greenhouse Gas Emission from Iron Ore Based Production at the Integrated Steel Plant SSAB Tunnplåt AB

During the years 2001–2002, a comprehensive study regarding CO₂ emissions related to the steel production for the integrated steel making production route, was carried out. The study was financed by SSAB and carried out by a research group with members from SSAB, MEFOS and LTU. The aim was to study the emissions from the existing system and how these could be influenced by process changes and by process modifications. The calculations were made using a global spreadsheet model for calculating the CO₂ emissions, developed from an existing Energy and Process Integration model of the same system. The calculated cases included the existing BF/BOF route as well as integration of other processes, e.g., an electric arc furnace, DR processes, COREX and a new future smelting reduction process concept (Sidcomet). All new existing alternative ore based process technologies would increase the specific CO₂ emission from the system. A technology transfer to scrap based metallurgy would significantly decrease the emission level, but is not feasible for SSAB, due to the future product mix and the structure of scrap availability. In a 5–20 year perspective, the existing steel making process route with the use of magnetite ore for pellet production has the lowest specific CO₂ emission. In a long-term perspective, 20–50 years, alternative process routes, e.g., based on H₂ and DRI, could be of interest. Studies on such changes are, however, big projects and should be carried out as joint European and/or international efforts.     

Issues and practices in the use of effects data from FREDERICA in the ERICA Integrated Approach

The ERICA Integrated Approach requires that a risk assessment screening dose rate is defined for the risk characterisation within Tiers 1 and 2. At Tier 3, no numerical screening dose rate is used, and the risk characterisation is driven by methods that can evaluate the possible effects of ionising radiation on reproduction, mortality and morbidity. Species sensitivity distribution has been used to derive the ERICA risk assessment predicted no-effect dose rate (PNEDR). The method used was based on the mathematical processing of data from FRED (FASSET radiation effects database merged with the EPIC database to form FREDERICA) and resulted in a PNEDR of 10 microGy/h. This rate was assumed to ascribe sufficient protection of all ecosystems from detrimental effects on structure and function under chronic exposure. The value was weighed against a number of points of comparison: (i) PNEDR values obtained by application of the safety factor method, (ii) background levels, (iii) dose rates triggering effects on radioactively contaminated sites and (iv) former guidelines from literature reviews. In Tier 3, the effects analysis must be driven by the problem formulation and is thus highly case specific. Instead of specific recommendations on numeric values, guidance on the sorts of methods that may be applied for refined effect analysis is provided and illustrated.     

Investigation of the concentration of bacteria and their cell envelope components in indoor air in two elementary schools

Bacterial cell envelope components are widely distributed in airborne dust, where they act as inflammatory agents causing respiratory symptoms. Measurements of these agents and other environmental factors are assessed in two elementary schools in a southeastern city in the United States. Muramic acid (MA) was used as a marker for bacterial peptidoglycan (PG), and 3-hydroxy fatty acids (3-OH FAs) were used as markers for Gram-negative bacterial lipopolysaccharide (LPS). Culturable bacteria were collected using an Andersen sampler with three different culture media. In addition, temperature (T), relative humidity (RH), and CO2 were continuously monitored. Concentrations of airborne MA and 3-OH FAs were correlated with total suspended particulate (TSP) levels. Outdoor MA (mean = 0.78-1.15 ng/m3) and 3-OH FA levels (mean = 2.19-2.18 ng/m3) were similar at the two schools. Indoor concentrations of airborne MA and 3-OH FAs differed significantly between schools (MA: 1.44 vs. 2.84 ng/m3; 3-OH FAs: 2.96 vs. 4.57 ng/m3). Although indoor MA levels were low, they were significantly related to teachers' perception of the severity of indoor air quality (IAQ) problems in their classrooms. Concentrations of CO2 correlated significantly with all bacteria measurements. Because CO2 levels were related to the number of occupants and the ventilation rates, these findings are consistent with the hypothesis that the children and teachers are sources of bacterial contamination. Many culturable bacteria present in indoor air are opportunistic organisms that can be infectious for compromised individuals, while both culturable and nonculturable bacterial remnants act as environmental toxins for both healthy and compromised individuals. Measuring the "total bacteria load" would be most accurate in assessing the biotoxicity of indoor air. Chemical analysis of MA and 3-OH FAs, when coupled with the conventional culture method, provides complementary information for assessing biocontamination of indoor air.     

Design of an integrated monitoring programme in Sweden

A National Swedish Environmental Monitoring Programme, the PMK, has been designed for regular and permanent recording of environmental conditions and long-term changes in background regions, and for keeping track of the flux of pollutants in and between various media. Many of the projects involved deal with integrated monitoring of terrestrial and limnic ecosystems. This work is carried out in or near some 20 small watersheds, usually selected in national parks or nature reserves. The environmental factors monitored in these areas include concentrations of chemical substances in precipitation, soil, groundwater, surface water, and organisms, as well as biological parameters—such as the population size and reproductive capacity of certain species—that may indicate effects of environmental disturbances. The data from this programme can be used as a reference to environmental data acquired near pollution sources, and as a basis for measures against e.g. acid rain, heavy-metal pollution, and use of pesticides. The biological parameters may also reveal effects of yet unknown pollutants or other disturbances.     

Stereoisomeric composition of the sex pheromone of the pine sawfly <Emphasis Type="Italic">Microdiprion pallipes</Emphasis> (Hym., Diprionidae)

Summary. The basic chemical structure of the sex pheromone of the pine sawfly Microdiprion pallipes (Fallén) has earlier been identified as the propionate ester of (2S,3S,7R/S,11R/S)/(2R,3R,7R/S,11R/S)-3,7,11- trimethyl-2-tridecanol. We now report the results from further investigations on the male response to individual stereoisomers and to blends of stereoisomers, both in electroantennographic (EAG) recordings and in field trapping experiments. We also present our attempts to determine the stereochemistry of the compounds present in females of M. pallipes. By comparing gas chromatograms and mass spectra obtained from natural extracts with those from synthetic compounds it was found that the females contain one or more of the four (2S,3S,7R/S,11R/S)-3,7,11-trimethyl-2- tridecanol isomers (SS++-1). The active pheromone component is the corresponding propionate ester 2. In EAG experiments, males responded most strongly to five propionate ester samples, namely two four-isomer blends: SS++-2 and SR++-2, and three individual stereoisomers: SSSR-, SRRR- and SRSR-2. In a series of field trapping experiments it was found that males were attracted to the SR++-2 four-isomer blend and to the individual isomer SSSR-2. Based on the EAG-recordings and field responses of males and the stereoisomers found in the females, we suggest that the propionate ester of (2S,3S,7S,11R)-3,7,11-trimethyl-2- tridecanol (SSSR-2) is used as a main component of the sex pheromone in M. pallipes. Apparently the males react to other stereoisomers in addition to that or those produced by the females.     

Evaluation of the methyl ester O-methyl acetate derivative of muramic acid for the determination of peptidoglycan in environmental samples by ion-trap GC-MS-MS

Muramic acid (MA) is a unique amino sugar that is a constituent of the peptidoglycan (PG) present in prokaryotic cell walls. MA can serve as a marker for quantifying bacterial load, e.g. in indoor environments, by using gas chromatography-tandem mass spectrometry (GC-MS-MS). We demonstrated recently that the methyl ester O-methyl acetate (MMA) derivative can be used to detect MA in house dust by ion-trap GC-MS-MS. However, since the MMA derivative is not formed from free MA quantification was not optimal. Here we report 1) significant improvements in sample preparation of the MMA derivative and 2) an evaluation of the performance of derivative, using for comparison the alditol acetate derivative, the gold standard in quantitative trace analysis of MA in complex matrices. The MMA derivative was analysed using an MS instrument with internal ionization and the alditol acetate derivative was analysed using an instrument with external ionization. 13C-labelled cyanobacteria, containing MA in their PG, were used as the internal standard. A linear relationship was found between the two methods in studies on 27 parallel samples of airborne dust from school classes collected on filters. Although the analytical sensitivity of the MMA derivatives was somewhat slightly lower than of the alditol acetate derivative, this may be due to differences in yield of derivative, sample clean-up efficiency, or different performance of the GC columns or MS instruments. However preparation of the MMA derivative is quick and compatible with preparation of methyl esters of 3-hydroxy fatty acids (used as markers of Gram negative endotoxin) allowing the levels of both markers to be determined in the same dust sample. In conclusion, the MMA procedure can be used to determine MA in environmental samples with good reproducibility provided the concentration of the 13C-labelled MA internal standard in the cyanobacteria is first determined with an alternative method.