The influence of crime prevention through environmental design on victimisation and fear of crime

People's perception of crime and incivilities vary considerably depending on their attitudes towards environmental conditions. This paper investigated the hypothesised relationships between Crime Prevention Through Environmental Design (CPTED), victimisation and fear of crime. The checklist was administered by using on-site observation to measure the CPTED construct followed by a self-administered questionnaire to explore the residents' perceptions of victimisation and fear of crime in their area of residency. In all, 164 respondents from a selected group of residents were involved in this study. The structural equation modelling technique was employed and the results indicate that CPTED is negatively related to victimisation. The model also shows that there is a significant positive direct influence of victimisation on fear of crime. However, no direct significant relationship was found between CPTED and fear of crime, but a negative indirect relationship between CPTED and fear of crime was observed through victimisation.     

Source Apportionment of Particulate Matter (PM10) and Indoor Dust in a University Building

A study on source apportionment of indoor dust and particulate matter (PM₁₀) composition was conducted in a university building by using chemometrics. The objective of this study was to investigate the potential sources of selected heavy metals and ionic species in PM₁₀ and indoor dust. PM₁₀ samples were collected using a low-volume sampler (LVS) and indoor dust was collected using a soft brush. Inductively coupled plasma spectrometry (ICP-MS) was used to determine the concentration of heavy metals, while the concentration of cations and anions was determined by atomic absorption spectrometer (AAS) and ion chromatography (IC), respectively. The concentration of PM₁₀ recorded in the building throughout the sampling period ranged from 20 ± 10 μgm^?3 to 80 ± 33 μgm^?3. The composition of heavy metals in PM₁₀ and indoor dust were dominated by zinc (Zn), followed by lead (Pb), copper (Cu), and cadmium (Cd). Principle component analysis (PCA) and multiple linear regression (MLR) showed that the main sources of pollutants in PM₁₀ came from indoor renovations (73.83%), vehicle emissions (16.38%), earth crust sources (9.68%), and other outdoor sources (0.11%). For indoor dust, the pollutant source was mainly earth crust. This study suggests that chemometrics can be used for forensic investigation to determine the possible sources of indoor contaminants within a public building.     

Comparison of bacterial community structures in two systems of a sewage treatment plant using PCR-DGGE analysis

Bacterial community was investigated during sludge bulking period using combination of PCR amplification of 16sRNA genes with DGGE analysis.     

Municipal solid waste management in Malaysia: Practices and challenges

Rapid economic development and population growth, inadequate infrastructure and expertise, and land scarcity make the management of municipal solid waste become one of Malaysia’s most critical environmental issues. The study is aimed at evaluating the generation, characteristics, and management of solid waste in Malaysia based on published information. In general, the per capita generation rate is about 0.5–0.8 kg/person/day in which domestic waste is the primary source. Currently, solid waste is managed by the Ministry of Housing and Local Government, with the participation of the private sector. A new institutional and legislation framework has been structured with the objectives to establish a holistic, integrated, and cost-effective solid waste management system, with an emphasis on environmental protection and public health. Therefore, the hierarchy of solid waste management has given the highest priority to source reduction through 3R, intermediate treatment and final disposal.     

Biosurfactant electrospun nanofibers exhibit minimal side effects on the structure and function of the liver tissue in male rat model

Environmental Science and Pollution Research - Oil spills can result in significant damage to marine estuaries, rivers, lakes, wetlands, and shorelines. Electrospun nanofibers containing...     

In situ evaluation of the genotoxic potential of the river Nile: I. Micronucleus and nuclear lesion tests of erythrocytes of Oreochromis niloticus niloticus (Linnaeus, 1758) and Clarias gariepinus (Burchell, 1822)

This study aimed to investigate the genotoxic potential of chemicals present along the course of the river Nile using frequencies of micronuclei (MN) and nuclear lesions (NL) in erythrocytes of Nile tilapia Oreochromis niloticus niloticus and African catfish Clarias gariepinus, as biomarkers. Results showed that most of the physicochemical parameters detected and heavy metal concentrations were significantly higher in the water collected from the estuaries of the river Nile compared to other sites of the upper Nile. The frequencies of MN and NL in peripheral blood erythrocytes of Nile tilapia and African catfish were significantly higher in estuary sites in Damietta and Rosetta compared to upper sites. The lowest level of genotoxicity was observed at two sites (Aswan and Kena), considered to be less contaminated. Our results suggested that higher frequencies of MN and NL determined at Damietta and Rosetta sites may be indicative of damage produced by pollutants in these areas. The most remarkable result was that MN and NL frequencies appear to be strongly related to water quality at different sites examined, indicating that MN frequencies may serve as a reliable biomarker for testing genotoxicity in situ. The positive correlation between MN and NL induction suggested that NL may be a useful complementary assay for genotoxicity analyses when fish are used as experimental animals. It was also found that seasonal variations in MN and NL frequencies might contribute to a better understanding of genotoxic responses in the field. The use of fish as indicator organisms for monitoring the presence of genotoxic-inducing contaminants in the environment seemed justified because the effects of exposure to a “complex mixture” such as river water were obtained. Nile tilapia appears to be a more suitable bioindicator species than African catfish in studying genotoxic chemical pollution in the river Nile attributed to a higher sensitivity.     

Exergy and energy analysis of a tubular solar still with and without fins: a comparative theoretical and experimental approach

Environmental Science and Pollution Research - One of the major challenges faced by human society is the freshwater crisis and shortage of conventional energy. Solar still is considered as one of...     

Analysis of a solar still with photovoltaic modules and electrical heater - Energy and exergy approach

The availability of drinkable water, along with food and air, is a fundamental human necessity. Because of the presence of higher amounts of salt and pollution, direct use of water from sources such as lakes, sea, rivers, and subsurface water reservoirs is not normally suggested. Solar is still a basic technology that can use solar energy to transform accessible waste or brackish water into drinkable water. Exergy analysis is a strong inferential technique for evaluating the performance of thermal systems. Exergy is becoming more popular as a predictive tool for analysis, and there is a rising interest in using it. In this paper, performance analysis on the aspect of energy and exergy from the proposed solar still (PSS) (conventional solar still with the photovoltaic modules-AC heater) was analyzed on three different water depths (W_d) conditions (1, 2, and 3 cm). Using a solar still with an electric heater, the daily potable water production was found as 8.54, 6.37, and 4.43 kg, for the variations in water depth (W_d) of 1, 2, and 3 cm respectively. The energy and exergy efficiency of the PSS at the W_d of 1, 2, and 3 cm were 75.67, 51.45, and 37.21% and 5.08, 2.29, and 1.03%, respectively. At 1 cm W_d, PSS produced the maximum freshwater yield as compared to the other two water depths. When the W_d is increased from 1 to 2 cm and from 1 to 3 cm, the yield is decreased up to 27.3 and 52.7%, respectively. Similarly, the energy and exergy efficiency is decreased up to 36.8 and 53.2% and 50.4 and 80.6%, respectively. The water cost of the modified solar still is calculated as 0.028 $/kg for the least water thickness.

     

Approaches to prevent and control Campylobacter spp. colonization in broiler chickens: a review

Environmental Science and Pollution Research - Campylobacter, Gram-negative bacteria, is the most common cause of acute bacterial enteritis in human beings, both in developing and developed...     

Natural radionuclides distribution and environmental impacts of ferruginous sand-siltstone (raw material) and their manufactured Ahmer oxide used as wall paints

Commercially known Ahmer oxide paints are prepared from raw material mainly composed of red iron oxides (hematite) and iron oxyhydroxides. The raw material used in manufacturing of Ahmer oxide comes from some localities in southwest Sinai such as Abu Thor, Allouga, and El lehian. The adsorption of uranium and other radioelements on iron oxides could make the raw material (red iron oxides) and their products environmentally hazardous. The studied samples were subjected to radiometric analysis using NaI (Tl) gamma-ray spectrometer. The average activity concentration of U, Th, Ra, and K are 108.7, 458.8, 88.8, and 627.5?Bq?kg^?1, respectively in raw material and 136.4, 14.6, 58.3, and 95.9?Bq?kg^?1 in Ahmer oxide. High values of activity concentrations of ²³⁸U, ²²⁶Ra, and ⁴⁰K were recorded in Allouga and El lehian raw material. High radioactivities of Allouga and El lehian raw material are mainly attributed to the presence of torbernite, zircon, and monazite, in addition to adsorbed elemental uranium in Ahmer oxide. absorbed dose rate (D), annual effective dose equivalent, radium equivalent activity (Ra_eq), external hazard index (H_ex), and internal hazard index (H_in), as well as representative gamma index (Iγ) were determined from the activity concentrations of ²²⁶Ra, ²³²Th, and ⁴⁰K. Some of the studied samples do not satisfy the universal standards.