Application of CGP-cross route process for microstructure refinement and mechanical properties improvement in steel sheets

A modified method of severe plastic deformation (SPD) entitled constrained groove pressing-cross route (CGP-CR) was introduced for imposing a high magnitude of equivalent strain of about 2.32 per pass on the sheet form samples. The major benefit of this improved route compared to previous common route was the more homogeneity of strain in the rolling (RD) and transverse (TD) directions of sheets. In this study, low carbon steel samples were used for examination of evolutions in microstructure and mechanical properties during SPD via CGP-CR process. Mechanical properties improvement were measured by tensile and macro hardness tests. The results indicate that CGP-CR process can effectively improve tensile strength; and also, yield stress and hardness of as-received low carbon steel samples were improved up to about 100% after two deformation passes. Also, high magnitude of inhomogeneity can be observed in hardness distribution through first pass of the process which diminishes in the subsequent passes. Microstructural evolutions during process were monitored by optical microscopy observations and X-ray diffraction analysis. The results demonstrate that initial ferritic microstructure with grain size of about 30 μm was refined to a 225 nm cell structure after two passes of CGP-CR process.     

Shellfish-Borne Viral Outbreaks: A Systematic Review

Investigations of disease outbreaks linked to shellfish consumption have been reported in the scientific literature; however, only few countries systematically collate and report such data through a disease surveillance system. We conducted a systematic review to investigate shellfish-borne viral outbreaks and to explore their distribution in different countries, and to determine if different types of shellfish and viruses are implicated. Six databases (Medline, Embase, Scopus, PubMed, Eurosurveillance Journal and Spingerlink electronic Journal) and a global electronic reporting system (ProMED) were searched from 1980 to July 2012. About 359 shellfish-borne viral outbreaks, alongside with nine ProMED reports, involving shellfish consumption, were identified. The majority of the reported outbreaks were located in East Asia, followed by Europe, America, Oceania, Australia and Africa. More than half of the outbreaks (63.6 %) were reported from Japan. The most common viral pathogens involved were norovirus (83.7 %) and hepatitis A virus (12.8 %). The most frequent type of consumed shellfish which was involved in outbreaks was oysters (58.4 %). Outbreaks following shellfish consumption were often attributed to water contamination by sewage and/or undercooking. Differences in reporting of outbreaks were seen between the scientific literature and ProMED. Consumption of contaminated shellfish represents a risk to public health in both developed and developing countries, but impact will be disproportionate and likely to compound existing health disparities.     

Presence of Torque Teno Virus (TTV) in Tap Water in Public Schools from Southern Brazil

Torque teno virus (TTV) was surveyed in tap water collected in schools from three municipalities located in the south of Brazil. TTV genomes were found in 11.7 % (4/34) of the samples. TTV DNA was detected in 10.5 % (2/19) of the samples collected at the city of Caxias do Sul and in 25 % (2/8) of the samples from Pelotas. Those cities have a low rate of sewage treatment. All samples from Santa Cruz do Sul, which has nearly 92 % of its sewage treated, were negative. These results suggest that the amount of sewage treated may have an effect on the detection rates of TTV DNA in drinking water in a given urban area, showing a mild negative correlation (r = ?0.76), when comparing the percentage of sewage treatment to the detection of TTV genomes. The detection rate of TTV was also compared with Escherichia coli, showing a strong correlation (r = 0.97), indicating that TTV may be a suitable marker of fecal contamination.     

Detection of Viruses in Coastal Seawater Using <Emphasis Type="Italic">Mytilus Galloprovincialis</Emphasis> as an Accumulation Matrix

The purpose of this study was to demonstrate that shellfish can be used to detect enteric viruses in marine waters where they are present at very low concentrations. Aqua-cultured mussels were placed in the sea just off the mouth of a drainage channel affected by human and animal faecal contamination. Samples were taken from the channel, the sea and the mussels at intervals over two 4-week periods. The samples were tested to verify the presence of both rotaviruses and E. coli. Rotaviruses were detected by Real Time-PCR, typed by multiplex PCR and subsequently sequenced. E. coli was enumerated in water matrices by a filtering method and in mussels by the MPN method. The presence of E. coli in the examined matrices demonstrates contamination of faecal origin throughout the studied environments. Rotaviruses were recorded in channel waters, but not in sea water. In both experiments, rotaviruses were detected in mussels 21 and 28 days after being placed in the sea water off the channel mouth. The use of mussels thus enabled the detection of rotaviruses in waters where the high dilution rendered direct investigation impossible. This study indicates that mussels can be used in marine virological surveillance programs.     

Management strategies to mitigate the impacts of climate change on sea turtle’s terrestrial reproductive phase

Climate change poses a serious threat to sea turtles (Cheloniidae) as their terrestrial reproductive phase is only successful within a limited range of environmental and physical conditions. These conditions are likely to become less optimal as climate change progresses. To date, management and conservation of sea turtles has focused almost entirely on non-climatic stressors, due at least in part to practitioners not knowing what strategies to take and the feasibility and risks of potential strategies. To aid the management of sea turtles in a changing environment, we identified management strategies via a focus workshop and surveys to mitigate the impacts of climate change to the terrestrial reproductive phase of sea turtles. The effectiveness, ecological risks and potential social and logistical constraints associated with implementing each of the identified management strategies is discussed. Twenty management strategies were identified; strategies varied from habitat protection to more active and direct manipulation of nests and the nesting environment. Based on our results, we suggest a three-pronged approach to sea turtle conservation in light of climate change, where managers and researchers should: 1) enhance sea turtle resilience to climate change by mitigating other threats; 2) prioritise implementing the ‘no regret’ and ‘reversible’ management strategies identified here; and 3) fill the knowledge gaps identified to aid the trial and implementation of the potential strategies identified here. By combining these three approaches our collective toolkit of sea turtle management strategies will expand, giving us an array of viable approaches to implement as climate change impacts become more extreme.     

Coastal flooding,climate change and environmental justice: identifying obstacles and incentives for adaptation in two metropolitan Boston Massachusetts communities

We explored the possible future impacts of increased coastal flooding due to sea level rise and the potential adaptation responses of two urban, environmental justice communities in the metropolitan Boston area of Massachusetts. East Boston is predominantly a residential area with some industrial and commercial activities, particularly along the coastal fringe. Everett, a city to the north of Boston, has a diversified industrial and commercial base. While these two communities have similar socioeconomic characteristics, they differ substantially in the extent to which residents would be impacted by increased coastal flooding. In East Boston, a large portion of residents would be flooded, while in Everett, it is the commercial/industrial districts that are primarily vulnerable. Through a series of workshops with residents in each community, we found that the target populations do not have an adaptation perspective or knowledge of any resources that could assist them in this challenge. Furthermore, they do not feel included in the planning processes within their communities. However, a common incentive for both communities was an intense commitment to their communities and an eagerness to learn more and become actively engaged in decisions regarding climate change adaptation. The lessons that can be applied to other studies include 1) images are powerful tools in communicating concepts, 2) understanding existing cultural knowledge and values in adaptation planning is essential to the planning process and 3) engaging local residents at the beginning of the process can create important educational opportunities and develop trust and consensus that is necessary for moving from concept to implementation.     

Dimensional analysis and scaling in mechanical mixing for fabrication of metal matrix nanocomposites

For a successful enhancement of mechanical properties of metal matrix nanocomposites, a homogeneous nanoparticle dispersion and distribution in the solidified metal is required. Mechanical mixing can be used for initial break-up of agglomerates, and its study can be simplified with dimensional analysis. Using this technique, mixing time and vortex height were assessed while varying fluid properties, impeller angle, and angular speed. Three relevant dimensionless numbers were recognized: the Reynolds (Re), Froude and Galilei (Ga) numbers. Based on blade and impeller shaft angles, a modified Froude number (Fr*) was defined. These parameters were calculated experimentally, varying angular speed from 200 to 1000 rpm for three different impeller angles: 0°, 15° and 30°. This procedure was performed with three fluids: water, and two aqueous glycerin solutions (25% and 50% by volume). Digital images were taken and processed to measure vortex height. Mixing time was measured for water at 0° impeller angle, angular speed ranging from 200 to 1200 rpm. Results showed an optimal dimensionless mixing time with respect to Re. A linear relationship was found between dimensionless vortex height and Fr*. The first had a second order polynomial relationship with the product ReFr*, regardless of impeller angle. This relationship, together with the Ga, specific for each fluid, allows scaling the results to other fluids such as molten pure aluminum. This study allows experimenting in simpler systems that involve transparent fluids, room temperature and low cost, to then elaborate a prediction of vortex height in fluids where measurements are difficult and costly, such as molten metals.     

External force-assisted laser forming process for gaining high bending angles

Laser forming process is used in forming and bending of metallic and non-metallic sheets. Laser beam irradiation causes a localized temperature increase and a localized mechanical strength decrease. In this article, an external mechanical force is added to a laser beam irradiation, which is called external force-assisted laser forming process, to gain a 90-degree bending angle. Furthermore, Numerical simulation of the process is performed to achieve a good understanding of the process. Simulation results show that more than two-third of the final forming is due to the laser beam irradiation. Equivalent plastic strain values during laser forming and external force-assisted laser forming processes are compared. Results show that equivalent plastic strain in laser forming process increases in a step pattern, with increasing in scan pass numbers. This occurs because when the laser beam irradiates on the sheet surface, it reduces the yield strength of the sheet. Equivalent plastic strain in external force-assisted laser forming process has an oscillatory step nature. This attributes to simultaneous effects of strain hardening and thermal induced reduction of yield strength of the sheet. Simulations were in good accordance with experiments.     

Influence of overlap between the laser beam tracks on surface quality in laser polishing of AISI H13 tool steel

Polishing by laser beam radiation is a novel manufacturing process to modify the initial surface topography in order to achieve a desired level of surface finish. The performance of laser polishing (LP) is determined by an optimum combination of several key process parameters. In this regard, the overlap between two successive laser beam tracks is one of the important LP process parameters, which has a significant effect over the final surface quality. In the current study, influence of overlap between the laser beam tracks on surface quality was experimentally investigated during the laser polishing of AISI H13 tool steel. Surface areas were polished by using four different overlap percentages (e.g. 80%, 90%, 95%, and 97.5%) while applying the same energy density. The improvement of surface quality was estimated through the analysis of line profiling surface roughness R_a, areal topography surface roughness S_a, and material ratio function. Also, individual components of the surface quality, e.g. waviness and roughness, and their evolution during LP were statistically analyzed using the power spectral density and the transfer functions. Finally, as an example of the best achieved LP result, flat surface area was polished using optimum set of the process parameters improving surface quality by 86.7% through the reduction of an areal topography surface roughness S_a from 1.35 μm to 0.18 μm.     

Greenhouse gas mitigation and offset options for suckler cow farms: an economic comparison for the Swiss case

We assessed the economic suitability of 4 greenhouse gas (GHG) mitigation options and one GHG offset option for an improvement of the GHG balance of a representative Swiss suckler cow farm housing 35 Livestock units and cultivating 25 ha grassland. GHG emissions per kilogram meat in the economic optimum differ between the production systems and range from 18 to 21.9 kg CO₂-eq./kg meat. Only GHG offset by agroforestry systems showed the potential to significantly reduce these emissions. Depending on the production system agroforestry systems could reduce net GHG emissions by 66% to 7.3 kg CO₂-eq./kg meat in the most intensive system and by 100% in the most extensive system. In this calculation a carbon sequestration rate of 8 t CO₂/ha/year was assumed. The potential of a combination of the addition of lipids to the diet, a cover of the slurry tank and the application of nitrification inhibitors only had the potential to reduce GHG emissions by 12% thereby marginal abatement costs are increasing much faster than for agroforestry systems. A reduction of the GHG emissions to 7.5 kg CO₂-eq./kg meat—possible with agroforestry only—raised costs between 0.03 CHF/kg meat and 0.38 CHF/kg meat depending on the production system and the state of the system before the reduction. If GHG emissions were reduced maximally average costs ranged between 0.37 CHF/kg meat, if agroforestry had the potential to reduce net GHG emissions to 0 kg CO₂-eq., to 1.17 CHF/kg meat if also other options had to be applied.