氧化亚铁硫杆菌脱除不同煤种硫分实验研究

利用氧化亚铁硫杆菌对煤中硫分的脱除作用,探讨了其对3种不同地域且不同矿物含量煤的脱硫作用。进行了未酸化与酸化处理煤样脱硫试验、温度影响试验、初始pH值影响试验。结果表明：未预处理条件下煤样I、n、Ⅲ的脱硫率分别为29．3％、3．9％、3．5％,酸处理后迭到39．8％、40．7％、4．2％。煤样Ⅰ、Ⅱ的最佳脱硫温度分别为35℃、30℃;温度30℃,初始pH为2．3时,煤样Ⅰ、Л的脱硫效果最好,分别为54％、67％;温度和pH的变化对煤样山的影响不大。30℃,初始pH为2．3时煤样Ⅰ、Ⅱ、Ⅲ的黄铁矿硫去除率分别为77％、83％、67％。     

The Effects of Gas Flow Rate and the Interval Time of Water Supplement on Ethanol Production of Rice Straw by Simultaneous Saccharification and Fermentation

In the present work, characteristics of ethanol production from a single particle composing of pretreated rice straw, cellulase, and β-glucosidase were invesitgated by simultaneous saccharification and fermentation (SSF). The experiment experienced a start-up stage for S. cerevisiae biofilm formation, which was operated at an initial pH value of 4.8 for yeast solution, culture temperature of 30°C, flow rate of 0.8 mL/min for yeast solution, and stably operating stage for ethanol production at a culture temperature of 30°C. Investigations found that the maximal ethanol yield of 9.7 mg/g and the biofilm thickness of 0.37 mm were obtained at 30 mL/min of carrier gas flow rate. Also, the optimal interval time of water supplement was 4 h for SSF. The results show that the appropriate gas flow rate and the interval time of water supplement can keep the high activities of biofilm and enzymes during SSF and result in a high ethanol yield.     

Forecasting industrial water demand in Huaihe River Basin due to environmental changes

A framework is proposed for forecasting industrial water demand in the context of climate change, economic growth, and technological development. The framework was tested in five sub-basins of Huaihe River of China, namely Upstream of Huaihe River (UH), Middlestream of Huaihe River (MH), Downstream of Huaihe River (DH), Yishusi River (YSSR), and Coastal River of Shandong Peninsula (CSP) to project future changes in industrial water demand under different environment change scenarios. Results showed that industrial water demand in Huaihe River basin will increase in the range of 10 to 44.6% due to economic development, water-saving technological advances, and climate change. The highest increase was projected by general circulation model (GCM) BCC-CSM1–1 (179.16 × 108 m³) and the lowest by GCM GISS-E2-R (132.4 × 10⁸ m³) in 2020, while the GCM BNU-ESM projected the highest increase (190.57 × 10⁸ m³) and GCM CNRM-CM5 the lowest (160.41 × 10⁸ m³) in 2030. Among the different sub-basins, the highest increase was projected in MH sub-basin where industrial water demand is already very high. On the other hand, the lowest increase in industrial water demand was projected in UH sub-basin. The rapid growth of high water-consuming industries and increased water demand for cooling due to temperature rise are the major causes of the sharp increase in industrial water demand in the basin. The framework developed in the study can be used for reliable forecasting of industrial water demand which in turn can help in selection of an appropriate water management strategy for adaptation to global environmental changes.     

Data mining for occupational injuries in the Taiwan construction industry

There is a higher rate of occupational injury in the construction industry than most other industries on average. However, steps can be taken to reduce worker risk through effective injury prevention strategies. In this article, association rule mining is employed in identifying the characteristics of occupational injuries in the construction industry. Accident reports during the period 1999–2004 are extracted from case reports of the Northern Region Inspection Office of the Council of Labor Affairs of Taiwan. In addition to general factors, several factors related to weather conditions are included in this article. The results show that there are some patterns of occupational injuries in the construction industry. The effect of rain on the occurrence of fatalities is of great significance. Proposed inspection plans should be in accordance with the type of construction and environmental evaluation. The findings identified in this article provide a direction for more effective inspection strategies and injury prevention programs.     

Anaerobic co-digestion of food waste and landfill leachate in single-phase batch reactors

In order to investigate the effect of raw leachate on anaerobic digestion of food waste, co-digestions of food waste with raw leachate were carried out. A series of single-phase batch mesophilic (35 ± 1 °C) anaerobic digestions were performed at a food waste concentration of 41.8 g VS/L. The results showed that inhibition of biogas production by volatile fatty acids (VFA) occurred without raw leachate addition. A certain amount of raw leachate in the reactors effectively relieved acidic inhibition caused by VFA accumulation, and the system maintained stable with methane yield of 369–466 mL/g VS. Total ammonia nitrogen introduced into the digestion systems with initial 2000–3000 mgNH₄–N/L not only replenished nitrogen for bacterial growth, but also formed a buffer system with VFA to maintain a delicate biochemical balance between the acidogenic and methanogenic microorganisms. UV spectroscopy and fluorescence excitation–emission matrix spectroscopy data showed that food waste was completely degraded.We concluded that using raw leachate for supplement water addition and pH modifier on anaerobic digestion of food waste was effective. An appropriate fraction of leachate could stimulate methanogenic activity and enhance biogas production.     

活性炭/铁氧化物复合材料催化降解水中的苯酚

为了获得优良催化性能和分离性的复合材料,通过采用化学共沉淀法,把活性炭和铁氧化物进行复合,制备得到活性炭/铁氧化物复合材料。利用非均相Fenton反应处理模拟苯酚废水,考察了不同因素对苯酚去除率的影响。结果表明,在100 mL 100 mg/L的苯酚模拟废水中,复合材料m=0.1 g,温度为35℃,H2O2投加量为3 mL,pH=3,苯酚的去除率达到99%以上。制备得到的活性炭/铁氧化物复合材料具有磁性,能通过简单的磁分离技术就能快速从溶液中分离出来。通过对复合吸附材料降解稳定性的研究,发现经过5次循环使用后,苯酚去除率均在93%以上,表明其具有良好的循环使用性能。     

Occurrence and distribution of veterinary antibiotics and tetracycline resistance genes in farmland soils around swine feedlots in Fujian Province, China

Six antibiotics, tetracyclines (TCs), and quinolones (QNs) in farmland soils from four coastal cities in Fujian Province of China were investigated. Oxytetracycline was most frequently detected, followed by enrofloxacin, ciprofloxacin, chlorotetracycline, ofloxacin, and tetracycline, with maximum concentrations of 613.2, 637.3, 237.3, 2668.9, 205.7, and 189.8 μg kg^?1, respectively. Samples from Putian City contained the highest maximum concentration of ∑TCs (3,064.2 μg kg^?1), whereas those from Fuzhou City contained the highest maximum concentration of ∑QNs (897.8 μg kg^?1). It is noteworthy that the ∑TCs and ∑QNs in 46.4 and 28.6 % of samples exceeded the ecotoxic effect trigger value (100 μg kg^?1), respectively. The concentrations of these antibiotics and five tetracycline resistance genes in four soil plots at depth profiles were quantified thereafter. In most cases, both antibiotics and resistance genes decreased with the increase of depth. Some antibiotics can be detected at a depth of 60–80 cm where the abundance of tetO, tetM, and tetX reached up to 10⁷ copies g^?1. Additionally, the sum of all tet genes (normalized to 16S rRNA genes) correlated with ∑TCs significantly (r?=?0.676). Our results suggest that resistance determinants can migrate to deeper soil layers and would probably contaminate groundwater by vertical transport.     

Towards a control model for the highly cybernetic farming ecosystems

Abstract

A dynamic model based on the linear systems theory is developed in designing a highly cybernetic farming strategy to efficiently manage residuals generated in farm ecosystems. A linear cybernetic model would be used to describe the dynamic behavior of resource flow in the farm ecosystem in which the state variables are resource quantities, and the control variables are residual quantities. The controlled process is defined as the controlled management strategy change. Cybernetic mechanism shows the application of residuals as control measures have determinate effects on the controlled process as along as the farming system is observable and controllable in the control sense. To illustrate the model algorithm the idea is applied to simulate the dynamic response of residual phosphorus concentrations in an integrated pig/corn farming system located in the south Taiwan region. General results show that the residual phosphorous concentration is influenced by farming activities which are controlled by a system of gross input and net output parameters. This paper demonstrates using input‐output analysis technique that residuals generated in the farming system is the most important cybernetic variable, so that the proper management of residuals alone has the potential to maintain future productivity and sustainability.     

Microwave enhanced advanced oxidation treatment of dairy manure

Abstract

The microwave enhanced advanced oxidation process (MW-AOP) was used to treat dairy manure in a continuous-flow 915?MHz microwave wastewater treatment system. The treatment efficiency increased with an increase in temperature, as well as hydrogen peroxide dosage. The settling property was also improved in all treated sets, regardless of temperature applied. The system operated at temperatures >100?°C had a much higher soluble chemical oxygen demand than at temperatures <100?°C. The highest soluble carbonaceous compounds, orthophosphate and ammonia were obtained at 110?°C and 0.6%H₂O₂ per % of total solids content. The process should be operated at higher temperatures and higher hydrogen peroxide dosages for maximizing solids disintegration, nutrient release and energy efficiency. An energy fingerprint correlating the cumulative energy consumption and temperature rise was developed. The results demonstrated that the custom designed MW-AOP system is suitable for the effective treatment of dairy manure. The system can readily be scaled up and integrated into a dairy farm manure treatment and resource recovery system.     

Deodorization of Dimethyl Sulfide Using a Discharge Approach at Room Temperature

Abstract

The traditional technologies for odor removal of thiol usually create either secondary pollution for scrubbing, adsorption, and absorption processes, or sulfur (S) poisoning for catalytic incineration. This study applied a laboratory-scale radio-frequency plasma reactor to destructive percentage-grade concentrations of odorous dimethyl sulfide (CH₃SCH₃, or DMS). Odor was diminished effectively via reforming DMS into mainly carbon disulfide (CS₂) or sulfur dioxide (SO₂). The removal efficiencies of DMS elevated significantly with a lower feeding concentration of DMS or a higher applied rf power. A greater inlet oxygen (O₂)/DMS molar ratio slightly improved the removal efficiency. In an O₂-free environment, DMS was converted primarily to CS₂, methane (CH₄), acetylene (C₂H₂), ethylene (C₂H₄), and hydrogen (H₂), with traces of hydrogen sulfide (H₂S), methyl mercaptan (CH₃SH), and dimethyl disulfide. In an O₂-containing environment, the species detected were SO₂, CS₂, carbonyl sulfide, carbon dioxide (CO₂), CH₄, C₂H₄, C₂H₂, H₂, formal-dehyde, and methanol. Differences in yield of products were functions of the amounts of added O₂ and the applied power. This study provided useful information for gaining insight into the reaction pathways for the DMS dissociation and the formation of products in the plasmolysis and conversion processes.