区域应急响应方案柔性生成方法研究

针对目前应急响应方案存在无法适应区域特征的问题,从柔性的角度出发,提出具有区域针对性的应急响应方案生成方法。通过分析区域应急需求,总结方案中的柔性要素;采用层次网络的方式对应急响应方案进行建模,提出要素和要素之间关系的确定方法,并分共性和个性2部分表示应急响应方案柔性生成框架;模拟地震灾害情景,实现柔性应急响应方案生成方法的案例验证,结果表明:该方法可以反映区域特点,高效有序并有针对性地完成有关突发事件的应对工作。     

Positively charged microporous ceramic membrane for the removal of Titan Yellow through electrostatic adsorption

To develop a depth filter based on the electrostatic adsorption principle, positively charged microporous ceramic membrane was prepared from a diatomaceous earth ceramic membrane.The internal surface of the highly porous ceramic membrane was coated with uniformly distributed electropositive nano-Y_2O_3 coating. The dye removal performance was evaluated through pressurized filtration tests using Titan Yellow aqueous solution. It showed that positively charged microporous ceramic membrane exhibited a flow rate of 421 L/(m~2·hr) under the trans-membrane pressure of 0.03 bar. Moreover it could effectively remove Titan Yellow with feed concentration of 10 mg/L between pH 3 to 8. The removal rate increased with the enhancement of the surface charge properties with a maximum rejection of 99.6%. This study provides a new and feasible method of removing organic dyes in wastewater. It is convinced that there will be a broad market for the application of charged ceramic membrane in the field of dye removal or recovery from industry wastewater.     

In situ measurements of NO,NO2, NOy,and O3 in Dinghushan (112°E, 23°N), China during autumn 2008

Measurements of O₃, NO, NO₂, and NO_y mixing ratios were carried out at a station-Dinghushan in Guangdong province of China from Oct. 18th, 2008 to Nov. 7th, 2008. This research shows that under conditions of a strong subtropical high (temperature high, relative humidity low), on Oct. 29th, 2008 the Dinghushan station observed severe photochemical pollution. The Maximum hour average concentration of O₃ reached 128 ppbv, and the serious photochemical pollution is caused by superposition of local photochemical reaction and regional transport. The observation that NO_x ozone production efficiency (OPE) values for high O₃ pollution on Oct. 29–30th, 2008 were 10.5 and 15, which were more than the values of the city source region and lower than that of the surrounding clean areas. It means the sensitivity of O₃ generated was transitioning from VOCs limited condition to NOx-limited regime. By applying a Smog Production Model, the results show that the extent of reaction values less than 0.6 were occurred on 17 days during campaign, and 13 days for the extents of reactions more than 0.6. However, there were no data with values over 0.8, which indicates that the observation station represent a VOCs sensitive system during campaign. Analysis of the extents of reactions and wind data show that the pollution is mostly subject to a southeasterly airflow influence.     

Long-term organic fertilizer-induced carbonate neoformation increases carbon sequestration in soil

Environmental Chemistry Letters - Soil carbon is major driver of climate in the long term because soil can either decrease global warming by carbon sequestration or increase warming by...     

Sources of 24-h personal exposure to PM2.5-bound metals: results from a panel study in Wuhan,China

Environmental Science and Pollution Research - Atmospheric PM2.5-bound metals have been widely addressed, but research on the exposure levels and sources of personal PM2.5-bound metals among urban...     

The effect of emission trading system on infant health: evidence from China

Environmental Geochemistry and Health - Although existing literature has explored the effect of the emission trading system (ETS) on economic growth and pollution emissions, little is known about...     

Design and prediction for highly efficient SO2 capture from flue gas by imidazolium ionic liquids

An efficient method for prediction in the capture of SO2 from flue gas by imidazolium ionic liquids was reported, where the concentration of SO2 is 2000 ppm. On the basis of quantitative calculations through a combination of Langmuir simulation, theoretical calculation and quantum chemical method, SO2 absorption and desorption performance from flue gas by twelve kinds of imidazolium ionic liquids with different anions were designed and predicted. Then, among them, five kinds of imidazolium ionic liquids were chosen and prepared to investigate their behavior of SO2 absorption capacity, desorption residue, and available absorption capacity. The results indicated that the experimental values were in good agreement with the predicted values. Thus, an ideal ionic liquid [Emim][Tetz] was obtained through the predictive method for the capture of SO2 of 2000 ppm, which showed high available absorption capacity of 0.24 g SO2 per g ionic liquid and excellent reversibility.     

PPCPs and heavy metals from hydrothermal sewage sludge-derived biochar: migration in wheat and physiological response

Environmental Science and Pollution Research - Once the sludge was directly used in the farmland, it will have a negative impact on human health through the food chain because sludge contains...     

Simulated adsorption of iodine by an amino-metal-organic framework modified with covalent bonds

Environmental Science and Pollution Research - Radioactive iodine in nuclear waste is increasingly harmful to the human body and the environment because of its strong radioactivity, high fluidity,...