Aquatic ecotoxicity assessment of a new natural formicide

Background, aim and scope

Agrochemicals could reach aquatic ecosystems and damage ecosystem functionality. Natural formicide could be an alternative to use in comparison with the more toxic formicides available on the market. Thus, the objective of this study was to assess the ecotoxicity of the new natural formicide Macex? with a battery of classical aquatic ecotoxicity tests.

Material and methods

Bacteria (Aliivibrio fischeri), algae (Pseudokirchneriella subcapitata), hydra (Hydra attenuata), daphnids (Daphnia magna), and fish (Danio rerio) tests were performed in accordance with international standardized methodologies.

Results

In the range of formicide concentrations tested (0.03 to 2.0?g?L^?1) EC₅₀ values varied from 0.49 to >2.0?g?L^?1, with P. subcapitata being the most sensitive species and H. attenuata and D. rerio the most tolerant species to this product in aqueous solutions.

Conclusions

This new formicide preparation can be classed as a product of low toxicity compared to the aquatic ecotoxicity of the most common commercialized formicides.     

Biochar: a synthesis of its agronomic impact beyond carbon sequestration

Biochar has been heralded as an amendment to revitalize degraded soils, improve soil carbon sequestration, increase agronomic productivity, and enter into future carbon trading markets. However, scientific and economic technicalties may limit the ability of biochar to consistently deliver on these expectations. Past research has demonstrated that biochar is part of the black carbon continuum with variable properties due to the net result of production (e.g., feedstock and pyrolysis conditions) and postproduction factors (storage or activation). Therefore, biochar is not a single entity but rather spans a wide range of black carbon forms. Biochar is black carbon, but not all black carbon is biochar. Agronomic benefits arising from biochar additions to degraded soils have been emphasized, but negligible and negative agronomic effects have also been reported. Fifty percent of the reviewed studies reported yield increases after black carbon or biochar additions, with the remainder of the studies reporting alarming decreases to no significant differences. Hardwood biochar (black carbon) produced by traditional methods (kilns or soil pits) possessed the most consistent yield increases when added to soils. The universality of this conclusion requires further evaluation due to the highly skewed feedstock preferences within existing studies. With global population expanding while the amount of arable land remains limited, restoring soil quality to nonproductive soils could be key to meeting future global food production, food security, and energy supplies; biochar may play a role in this endeavor. Biochar economics are often marginally viable and are tightly tied to the assumed duration of agronomic benefits. Further research is needed to determine the conditions under which biochar can provide economic and agronomic benefits and to elucidate the fundamental mechanisms responsible for these benefits.     

The ecological apparency hypothesis and the importance of useful plants in rural communities from northeastern Brazil: an assessment based on use value

The ecological apparency hypothesis in ethnobotanical studies predicts that the apparent plants (i.e., the most easily found in the vegetation) would be the most commonly collected and used by people. To test this hypothesis, it has been used the concept of use value (VU), which measures the relative importance of useful plants for a group of people. However, the use value has got some limitations, including the fact that it does not distinguish "current use" (plants which are effectively used) from "potential use" (well known plants, however not used). Therefore, this study has tested whether the obtained results through three different use value calculations could be useful in testing the ecological apparency hypothesis. These calculations have included the current use value, the potential use value, and the general use value. It has been carried out a vegetation survey and an interview for residents from the rural communities from Barrocas and Cachoeira (Soledade, Paraíba, Brazil). It has been used Spearman's coefficient to correlate phytosociological and ethnobotanical data. It has been observed that phytosociological parameters in Cachoeira were not correlated with any of the use values calculations, except the relationship between the current use value and the relative dominance (r(s)?=?0.57; p?相似文献   

Use of rainwater for non-potable purposes in the Amazon

The Brazilian Amazon has about 69 % of available freshwater in Brazil, an amount that ends up creating the illusion that no lack of water and not lacking in the region, the large supply of this resource becomes a problem when it comes to the Management and Planning Water Resources in the Amazon, according to the wasteful use and lack of maintenance of stocks, compounded by the release of untreated wastewater. Speaking of water conservation programs in the Amazon a few decades ago and still today, with less intensity, is somewhat strange, given the large amount of water available and the culture of abundance. Thus, this research discusses the importance of the use of rainwater for non-potable purposes, since the potential for exploitation, throughout the year, due to this high rainfall in the Amazon region, ranging from, on average, 119.6 mm in months from November to 441.6 mm in March. The methods used for sizing of the reservoir were the Rippl and interactive, and economic viability checking done by the methods of net present value and discounted payback. As a result, there was a volume exceeding 1,000 m³ obtained by the method of Rippl, while the interactive method was a maximum of 75 m³. The economic viability presented fragile as a function of time to return exceeds the useful life of the utilization system for rainwater.     

Continuous flow photo-Fenton treatment of ciprofloxacin in aqueous solutions using homogeneous and magnetically recoverable catalysts

The degradation of ciprofloxacin was studied in aqueous solutions by using a continuous flow homogeneous photo-Fenton process under simulated solar light. The effect of different operating conditions on the degradation of ciprofloxacin was investigated by changing the hydrogen peroxide (0–2.50 mM) and iron(II) sulphate (0–10 mg Fe L^?1) concentrations, as well as the pH (2.8–10), irradiance (0–750 W m^?2) and residence time (0.13–3.4 min) of the process. As expected, the highest catalytic activity in steady state conditions was achieved at acidic pH (2.8), namely 85 % of ciprofloxacin conversion, when maintaining the other variables constant (i.e. 2.0 mg L^?1 of iron(II), 2.50 mM of hydrogen peroxide, 1.8 min of residence time and 500 W m^?2 of irradiance). Additionally, magnetite magnetic nanoparticles (ca. 20 nm of average particle size) were synthesized, characterized and tested as a possible catalyst for this reaction. In this case, the highest catalytic activity was achieved at natural pH, namely a 55 % average conversion of ciprofloxacin in 1.8 min of residence time and under 500 W m^?2. Some of the photocatalytic activity was attributed to Fe²⁺ leaching from the magnetic nanoparticles to the solution.     

The spatial distribution of eubacteria and archaea in sand-clay columns degrading carbon tetrachloride and methanol

The spatial distribution of microbial communities was investigated in anaerobic sand-clay columns fed methanol and carbon tetrachloride (CT). Microbial communities were characterized through analysis of soil samples with denaturing gradient gel electrophoresis (DGGE) and quantitative polymerase chain reaction (qPCR) for archaea and eubacteria. Increasing CT inlet concentrations to 29 microM lead to complete inhibition of methanol consumption in both columns. Although low levels of eubacteria and archaea were initially present in the clay soils in both columns, there was no significant microbial growth over 400 days in the clays beyond the interface with the sand zone. Thus, the potential for increased contaminant attenuation in heterogeneous sand-clay systems through biodegradation in the clay matrix zones may be limited in many systems.     

Characterization of Atrazine-Loaded Biodegradable Poly(Hydroxybutyrate-Co-Hydroxyvalerate) Microspheres

Polyhydroxybutyrate-co-hydroxyvalerate microspheres (PHBV-MS) were prepared as a delivery system for the herbicide atrazine (ATZ). Characterization of the system included investigation of in vitro release properties and genotoxicity. ATZ − PHBV-MS particle diameters showed a size distribution range of 1–13 μm. Differential scanning calorimetry analyses indicated that ATZ was associated with the PHBV microparticles. The release profiles showed a different release behavior for the pure herbicide in solution, as compared with that containing ATZ-loaded PHBV-MS. Korsmeyer–Peppas model analyses showed that atrazine release from the microparticles occurred by a combination of diffusion through the matrix and partial diffusion through water-filled pores of the PHBV microparticles. A Lactuca sativa test result showed that the genotoxicity of ATZ-loaded PHBV-MP was decreased in relation to ATZ alone. The results demonstrate a viable biodegradable herbicide release system using atrazine for agrochemical purposes.     

Soil quality assessment in rice production systems: establishing a minimum data set

Soil quality, as a measure of the soil's capacity to function, can be assessed by indicators based on physical, chemical, and biological properties. Here we report on the assessment of soil quality in 21 rice (Oryza sativa) fields under three rice production systems (semi-direct, pre-germinated, and conventional) on four soil textural classes in the Camaqu? region of Rio Grande do Sul, Brazil. The objectives of our study were: (i) to identify soil quality indicators that discriminate both management systems and soil textural classes, (ii) to establish a minimum data set of soil quality indicators and (iii) to test whether this minimum data set is correlated with yield. Twenty-nine soil biological, chemical, and physical properties were evaluated to characterize regional soil quality. Soil quality assessment was based on factor and discriminant analysis. Bulk density, available water, and micronutrients (Cu, Zn, and Mn) were the most powerful soil properties in distinguishing among different soil textural classes. Organic matter, earthworms, micronutrients (Cu and Mn), and mean weight diameter were the most powerful soil properties in assessing differences in soil quality among the rice management systems. Manganese was the property most strongly correlated with yield (adjusted r2 = 0.365, P = 0.001). The merits of sub-dividing samples according to texture and the linkage between soil quality indicators, soil functioning, plant performance, and soil management options are discussed in particular.     

Evaluation of the effectiveness of red mud-supported catalysts in combination with ozone and TiO<Subscript>2</Subscript> in the treatment of solution containing benzene,toluene, and xylene

Ozone and a Fe²⁺/TiO₂-based catalyst were examined in the degradation of a synthetic solution of benzene toluene and xylene (BTX) in an advanced oxidation process (AOP). The catalyst beads were made from the slurry waste of aluminum production process, by inserting the TiO₂ content and subsequent calcination. The reduction of the BTX concentration load was monitored by the reduction of chemical oxygen demand (COD) and BTX concentration. Different levels were used on factors: pH, time of treatment, initial concentration of BTX, and percentage of TiO₂. The process was conducted in a bubble column reactor with the insertion of catalyst beads. A response surface methodology technique (CCD) was used to build a model based on COD reduction results. The model was optimized using the normal-boundary intersection (NBI) algorithm to maximize COD reduction and minimize the variance attributed to the process. Optimization led to COD reductions of 80% in 2 h of experiment. Correlation analysis of coefficient models from experimental data R²_adj was 0.9966, showing a good fit of model data. In the optimized conditions, the possible increase of the biodegradability ratio of the BTX solution, through the biochemical oxygen demand (BOD) and COD, was also analyzed. Under pre-treatment conditions, the BOD/COD ratio was 0.13. After the treatment, it increased to 0.56.

Open image in new window

Graphical abstract ?

     

Soil heavy metal content on the hillslope region of Rio de Janeiro,Brazil: reference values

The increasing concern regarding the preservation of soil quality suggests the adoption of quality reference values as a first step in environmental monitoring actions. In this context, the objective of this study was to establish soil quality reference values for Al, Zn, Mn, Cd, Fe, Pb, Ni, Cr, and Cu and to correlate several soil properties with the occurrence of these elements in the hillslope region of Rio de Janeiro State. Sixty-two samples were collected at depths of 0–20 and 20–40 cm and analyzed using the USEPA method 3051A. After clustering analysis, the samples were separated into three groups. Classification functions were obtained based on the variables pH - Mg - Fe - Mn, i.e., the variables that were best related to heavy metal content. We determined to establish the quality reference values for the 75th percentile of the three groups. The relief forms of the area, which facilitate the transport of soil fine-particle fractions and accumulation in lowlands, were revealed to be one of most important factors in understanding the distribution of soil heavy metals.