An integrated fuzzy-stochastic modeling approach for risk assessment of groundwater contamination

An integrated fuzzy-stochastic risk assessment (IFSRA) approach was developed in this study to systematically quantify both probabilistic and fuzzy uncertainties associated with site conditions, environmental guidelines, and health impact criteria. The contaminant concentrations in groundwater predicted from a numerical model were associated with probabilistic uncertainties due to the randomness in modeling input parameters, while the consequences of contaminant concentrations violating relevant environmental quality guidelines and health evaluation criteria were linked with fuzzy uncertainties. The contaminant of interest in this study was xylene. The environmental quality guideline was divided into three different strictness categories: "loose", "medium" and "strict". The environmental-guideline-based risk (ER) and health risk (HR) due to xylene ingestion were systematically examined to obtain the general risk levels through a fuzzy rule base. The ER and HR risk levels were divided into five categories of "low", "low-to-medium", "medium", "medium-to-high" and "high", respectively. The general risk levels included six categories ranging from "low" to "very high". The fuzzy membership functions of the related fuzzy events and the fuzzy rule base were established based on a questionnaire survey. Thus the IFSRA integrated fuzzy logic, expert involvement, and stochastic simulation within a general framework. The robustness of the modeling processes was enhanced through the effective reflection of the two types of uncertainties as compared with the conventional risk assessment approaches. The developed IFSRA was applied to a petroleum-contaminated groundwater system in western Canada. Three scenarios with different environmental quality guidelines were analyzed, and reasonable results were obtained. The risk assessment approach developed in this study offers a unique tool for systematically quantifying various uncertainties in contaminated site management, and it also provides more realistic support for remediation-related decisions.     

武都碾压混凝土重力坝抗震分析与安全评价

武都水库是四川省江油市境内的涪江干流上的大(1)型水利工程。汶川8级地震中,武都水库工程紧邻震中区附近,并正处于施工高峰期,大地震对武都水库工程已建和在建的40多个项目均有不同程度的损坏。分别采用水工建筑物抗震设计规范给定的地震动参数值和地震后复核确定的地震动参数值,对武都大坝进行抗震分析与安全性评价。计算表明,当设计设防加速度256cm/s2时,按规范规定的悬臂梁法进行抗震计算时,均满足现行抗震规范的要求。按平面有限元计算时局部拉应力超出规范的允许值,建议挡水坝段下游坝面折坡附近以及溢流坝段在导墙与边墩交接处附近提高混凝土的强度等级。鉴于坝踵、坝址部位局部范围内仍有较大水平的拉应力,建议自建基面的一定高度内应确保混凝土的浇筑质量,以确保大坝的抗震强度安全。     

Development of Hybrid Film Based on Carboxymethyl Chitosan-Gum Arabic Incorporated Citric Acid and Polyphenols from Cinnamomum camphora Seeds for Active Food Packaging

Journal of Polymers and the Environment - In this study, carboxymethyl chitosan with gum Arabic (CG) based novel functional films containing Cinnamomum camphora seeds extract (CCSE) at varying...     

化学混凝法去除稠油废水中的硅

以新疆油田稠油废水为研究对象,采用化学混凝除硅方法对稠油废水进行处理。实验结果表明:采用锌复合混凝剂的混凝、软化及镁剂除硅相结合的方法具有较好的除硅效果。确定了最佳除硅配方:NaOH的加入量为500~600mg/L,除硅剂MgCl2.6H2O的加入量为700~800mg/L,锌复合混凝剂加入量为100~150mg/L,处理后废水中SiO2的质量浓度小于50mg/L,达到热采锅炉的用水标准。     

岩豆凝集素的纯化及其分子残基的化学修饰和活性关系

岩豆种子经侵取、硫酸铵分级、ＤＥＡＥ－纤维素离子交换和ＳｅｐｈａｄｅｘＧ－１００分子筛层析，获得ＦＰＬＣ上单一的凝集素样品，对此纯化的凝集素样品用Ｎ－溴代丁二酰亚胺、Ｎ－乙基顺丁烯二酰亚胺、二流苏糖醇，碘乙酸和对氯汞苯甲酸修饰其分子内的色氨酸和巯基．经计算，该凝集素分子内含有４个色氨酸和２４个流基，当色氨酸被修饰后其凝集活性全部丧失，而巯基被修饰后对其凝血活性无任何影响，表明巯基与凝集素分子的凝血活性无关，而色氨酸则是凝集活性所必需的基团．     

2株苯胺降解的分离鉴定及其降解特性研究

从处理印染废水的活性污泥中分离得到2株苯胺降解菌,从菌落、细胞形态、生理生化及16S rRNA基因扩增测序等方面对2株菌进行了鉴定,并比较分析2株菌在好氧与缺氧条件下的苯胺降解、偶氮染料脱色及苯胺脱氨氧化酶基因tdnQ和黄素还原酶基因(fre)的携带情况.结果表明,2株菌属于Pseudomonas属和Shewanella属,分别命名为Pseudomonas sp.AN30和Shewanella sp.DN425.AN30菌株在振荡好氧条件下72h内对250mg/L苯胺的降解率为96.1%,DN425菌株的降解率为13.8%;在静置缺氧条件下AN30菌株的苯胺降解率为39.6%,DN425菌株的降解率仅为8.6%.DN425菌株在静置缺氧条件下4h内可将初始浓度为50 mg/L的偶氮染料酸性大红彻底脱色,而AN30菌株对酸性大红不具有脱色能力.以总DNA为模板,分别用tdnQ基因和fre基因特异性引物进行扩增,2株菌均能扩增出大小分别为380bp和630bp左右的目标条带,显示2菌株均携带有苯胺脱氨氧化酶基因和黄素还原酶基因.     

城市污水处理厂化学除磷工艺精确控制技术研究进展

现今自动控制系统已经广泛应用于城市污水处理厂。总结归纳了污水处理厂的化学除磷工艺,重点对加药过程控制的类型,包括手动控制系统、自动控制系统、智能控制系统进行较为详细的论述。最后针对传统污水处理厂存在的问题和不足,提出研究污水处理厂化学除磷工艺精确控制系统技术的必要性。     

Life cycle assessment of TV sets in China: A case study of the impacts of CRT monitors

Along with the rapid increase in both production and use of TV sets in China, there is an increasing awareness of the environmental impacts related to the accelerating mass production, electricity use, and waste management of these sets. This paper aims to describe the application of life cycle assessment (LCA) to investigate the environmental performance of Chinese TV sets. An assessment of the TV set device (focusing on the Cathode Ray Tube (CRT) monitor) was carried out using a detailed modular LCA based on the international standards of the ISO 14040 series. The LCA was constructed using SimaPro software version 7.2 and expressed with the Eco-indicator' 99 life cycle impact assessment method. For a sensitivity analysis of the overall LCA results, the CML method was used in order to estimate the influence of the choice of the assessment method on the results. Life cycle inventory information was compiled by Ecoinvent 2.2 databases, combined with literature and field investigations on the current Chinese situation. The established LCA study shows that the use stage of such devices has the highest environmental impact, followed by the manufacturing stage. In the manufacturing stage, the CRT and the Printed Circuit Board (PCB) are those components contributing the most environmental impacts. During the use phase, the environmental impacts are due entirely to the methods of electricity generation used to run them, since no other aspects were taken into account for this phase. The final processing step-the end-of-life stage-can lead to a clear environmental benefit when the TV sets are processed through the formal dismantling enterprises in China.     

武钢签订安全生产目标责任状制度概述

概略地分析了武钢安全生产目标责任状制度的内容、作用和目的 ,以及实施和管理该责任制的一些主要做法、措施。通过实施签订安全生产目标责任状制度 ,促使各级领导、各部门落实安全生产责任制 ,取得了成效 ,确保了安全生产     

燃煤锅炉脱硫除尘装置改造

燃煤锅炉的湿式脱硫除尘装置常因净化液管路出现故障而影响到生产,主要是因为安装在其内的陶瓷嘴受高温烟尘的影响而爆裂,通过安装结构简单、性能可靠的自控系统使装置保持连续正常工作。