利用卫星遥感评估广西壮族自治区SO_2减排成效

基于2005—2012年OMI卫星遥感PBL SO2柱浓度数据分析了广西壮族自治区SO2污染的时空格局和变化特征,并结合燃煤火电厂SO2排放模型估算与工业经济增长数据,在时间、空间尺度上分析了自治区内不同区域的SO2污染对火电厂烟气脱硫政策的响应以及所呈现出的减排成效。结果表明,广西因火电厂脱硫政策驱动的SO2污染改善具有显著的空间异质性,自治区内高污染区的SO2浓度在2011—2012年出现了显著下降,而低污染区的SO2浓度则在8年中持续增长;排放模型估算结果显示,烟气脱硫驱动的火电厂SO2减排贡献将在2008年后持续下降,而遥感观测结果显示,广西全区SO2半年浓度均值总体呈现波动上升趋势,2005—2012年浓度增加了8.6%、年均增长约0.9%;综合工业经济增长数据发现,近年来其他工业源的增量排放已给广西SO2减排带了新挑战,而这一变化仍未得到相关决策部门关注,存在明显缺陷的SO2统计排放量数据尚未得到修正。针对上述污染变化新特征,政府相关部门应引起足够重视,尽快更新完善污染源信息并启动针对其他污染源的限排措施,以确保环境持续改善。     

Characterization of the interactions between tetracycline antibiotics and microbial extracellular polymeric substances with spectroscopic approaches

The antibiotics have attracted global attentions for their impact on aquatic ecosystem. The knowledge about the fate of antibiotics encountering extracellular polymeric substances (EPS) is, however, limited. In this study, we investigated the interacting mechanisms of tetracycline (TC) to EPS extracted from aerobic activated sludge. The contributions of the main components of EPS, extracellular proteins, and polysaccharides were evaluated using bovine serum albumin and alginate sodium, respectively. Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and nuclear magnetic resonance indicated that hydroxyl, carboxyl, and amino groups were the domain chemical groups involved in the interaction between TC and EPS, and the binding of TC onto EPS changed the structure of these chemical groups, thus causing shifts in their UV–visible absorption spectra. In addition, we found that extracellular proteins, rather than polysaccharides, were the major active contents involved in the interaction. Three-dimensional excitation–emission matrix fluorescence spectroscopy showed that the fluorophores in EPS were clearly quenched by TC and the static quenching process was observed, implying the complex formation of TC and EPS. Furthermore, thermodynamic analysis indicated that the binding of TC with EPS is spontaneous and dominated by electrostatic forces.     

Oxidation of ofloxacin by Oxone/Co2+: identification of reaction products and pathways

Oxidative degradation of ofloxacin (OFX) by sulfate free radicals (SO₄ ^??) in the UV/Oxone/Co²⁺oxidation process was investigated for the first time, with a special focus upon identifying the transformation products as well as understanding the reaction pathways. Thirteen main compounds were identified after the initial transformation of OFX; the detailed structural information of which were characterized by high-performance liquid chromatography–high resolution mass spectrometry and MS fragmentation analysis. The degradation pathways mainly encompassed ring openings at both the piperazinyl substituent and the quinolone moiety, indicating that the usage of SO₄ ^?? aided the oxidative degradation of OFX to undergo more facile routes compared to those in previous reports by using OH^?/h⁺ as the oxidant, where the initial transformation attacks were mainly confined to the piperazine moiety. Moreover, in this study, smart control over the pH conditions of the oxidation system via different modes of Oxone dosage resulted in the selective degradation of the functional sites of OFX molecule, where it was shown that the SO₄ ^??-driven destruction of the quinolone moiety of OFX molecule favored the neutral pH conditions. This would be beneficial for the reduction of bacterial resistance against quinolones in the aqueous environment.     

Medium optimization for the production of anti-cyanobacterial substances by Streptomyces sp. HJC-D1 using response surface methodology

Bioremediation using isolated anti-cyanobacterial microorganism has been widely applied in harmful algal blooms (HABs) control. In order to improve the secretion of activated anti-cyanobacterial substances, and lower the cost, a sequential optimization of the culture medium based on statistical design was employed for enhancing the anti-cyanobacterial substances production and chlorophyll a (Chl a) removal by Streptomyces sp. HJC-D1 in the paper. Sucrose and KNO₃ were selected as the most suitable carbon and nitrogen sources based on the one-at-a-time strategy method, and sucrose, KNO₃ and initial pH were found as major factors that affected the anti-cyanobacterial ability of the isolated stain via the Plackett–Burman design. Based on the response surface and canonical analysis, the optimum condition of culture medium was obtained at 22.73 g l^-1 of sucrose, 0.96 g l^-1 of KNO₃, and initial pH 8.82, and the Chl a removal efficiency by strain HJC-D1 increased from 63?±?2 % to 78?±?2 % on the optimum conditions.     

Mn/γ-Al2O3催化剂的制备及头孢合成废水的催化臭氧氧化法深度处理

对Mn/γ-Al₂O₃催化剂的制备条件及头孢合成废水的催化臭氧氧化法深度处理工艺条件进行了优化。实验结果表明：以Mn（NO₃）₂溶液为浸渍液,Mn/γ-Al₂O₃催化剂的最优制备条件为浸渍液浓度0.10 mol/L、浸渍时间9 h、焙烧温度400 ℃、焙烧时间2 h;在反应时间为30 min、废水pH为9.0、臭氧通量为4.6 mg/min、催化剂加入量为5 g/L的条件下,当进水COD、BOD₅、ρ（氨氮）和色度分别为220~250 mg/L,8~10 mg/L,10~12 mg/L和60~70倍时,出水COD、BOD₅、ρ（氨氮）和色度的平均去除率分别为53%,30%,33%和93%,出水水质满足GB 21904—2008《化学合成类制药工业水污染物排放标准》的要求。     

利用白云石石灰去除与回收污泥厌氧消化液中氮和磷

以白云石石灰为实验材料去除与回收污泥厌氧消化液中的氮磷,通过小试实验研究不同投药固液比S/L、初始pH值、反应温度、搅拌速度及反应时间对去除与回收氮磷效果的影响。实验结果表明,在最佳投药固液比S/L为300mg/L,最佳初始pH值范围为8.5~9.5,反应温度为25.0℃,搅拌速度为150 r/min,反应时间为24 h条件下,氨氮(NH+4-N)和磷(PO3-4-P)的去除率分别为37.26%和89.60%。利用X射线衍射仪(XRD)、扫描电镜(SEM)对沉淀产物进行了表征,通过分析可知沉淀产物中含有磷酸铵镁(MAP),可实现废水中氮磷经济有效的回收。     

添加天然沸石和石灰对土壤镉形态转化的影响

采用土壤培养实验,研究镉污染土壤中添加沸石、石灰及两者配施对土壤pH值和土壤镉形态变化的影响。结果表明,土壤pH值随沸石用量的增加而增加,随培养时间呈现先增加后下降并逐渐趋于稳定的趋势,但均高于对照。高剂量石灰的处理对土壤pH的影响最大,与对照相比土壤pH提高了3.33个单位。在土壤5~50 d培养过程中,石灰处理的土壤交换态镉含量呈现先逐渐降低而后略有升高的趋势,其余处理均呈下降趋势。培养50 d后,高剂量的沸石、石灰及高剂量沸石与石灰配施处理的土壤交换态镉含量从5 d时的67.54、61.95和55.56 mg/kg降低至54.65、49.93和45.96mg/kg。相关分析表明,不同培养时期交换态镉含量与土壤pH值呈负相关关系。在10个处理中,L2Z3(石灰2 g/kg土和沸石60 g/kg土)组合处理效果最好,使土壤交换态镉含量下降了34.68%,碳酸盐结合态镉含量上升了4.30%,铁锰氧化结合态镉含量上升了16.97%,有机结合态镉含量上升了1.31%,残渣态镉含量上升了12.11%。     

不同运行模式对同步脱氮除磷CAST工艺快速启动及其稳定维持的影响

以实际生活污水为处理对象,考察了传统进水/曝气和改良型分段进水的交替缺氧-好氧(A/O)2种运行模式对CAST工艺的快速启动及脱氮除磷性能稳定维持的影响。结果表明,传统进水/曝气运行模式下,系统达到最佳营养物去除性能所需启动时间30 d,稳定运行阶段TN平均去除80.66%,磷的去除率维持在66.30%左右;采用改良型交替运行模式,反应器达到稳定运行状态仅需18 d,系统稳定运行时TN平均去除81.36%,磷去除率稳定维持在90%以上,出水磷浓度在0.3 mg/L以下,出水水质达到国家污水综合排放标准一级A(GB8978-2002)。研究还发现,传统运行模式下,由低温引起的污泥沉降性能变差导致系统污泥严重流失,反应器几乎丧失污染物去除性能;而低温对交替运行模式下的反应器除磷性能几乎没有影响,总氮去除则因氨氮不完全硝化而大大降低。     

水平潜流人工湿地在不同水力负荷下的水力效率及可视化分析

构建水平潜流人工湿地装置,通过NaCl示踪脉冲实验,得到不同水力负荷条件下的水力停留时间分布密度曲线,根据不同停留时间的关系计算相对水力效率,并利用染料,进行不同水力负荷下的可视化示踪实验,通过MATLAB处理得到高对比度的流态图像。观察"死区"分布,计算"死区"相对面积用以表征其水力效率。结果表明,湿地装置进水水力负荷较高或较低时,水力效率均较低,且水力负荷较大时更明显;水力分布散度(σ2θ)的大小会对水平潜流人工湿地水力效率造成较大影响;在不同水力负荷下,采用水力学效能(λ)所得到的排序结果相比短路值(s)和有效体积比(e)更能代表实际水平潜流人工湿地的水力效率。     

络合萃取技术分离制药废水中的金刚烷胺

以P204为络合剂萃取水溶液中的金刚烷胺,研究了正辛醇和煤油2种稀释剂对萃取效果的影响,分析了萃取过程的络合机理和热力学过程,并考察了该萃取体系对实际制药废水中金刚烷胺的萃取效果。结果表明,采用P204/正辛醇=3∶2的复配萃取剂,在初始pH为8.0,在油/水相比为1∶1的条件下,金刚烷胺的萃取效率可以达到99.8%以上;以2.0mol/L的HCl溶液为反萃取剂,可以将51.1%的负载金刚烷胺反萃回收;红外光谱分析表明,P204对金刚烷胺的萃取遵循离子交换和离子缔合成盐机制;萃取过程为放热过程,低温条件下有利于萃取反应的进行;P204/正辛醇复配萃取剂对实际制药废水中的金刚烷胺也具有很高的萃取效率。