Heavy metal concentration in fish tissues inhabiting waters of “Buško Blato” reservoar (Bosnia and Herzegovina)

Heavy metals concentration (mercury, lead, cadmium, arsenic, copper, zinc and chromium) in tissues (muscles, liver, kidney and gonads) of Dalmatian barbelgudgeon, the nase, the souffie and brown trout, inhabiting waters of Busko Blato reservoir in Bosnia and Herzegovina, has been determined by atomic absorption spectrophotometry. The meat of the tested fish sorts does not contain elevated concentration of most analyzed heavy metals with exception of lead (higher than MAC in Italy, Germany and Denmark) and mercury (in muscles of brown trout higher than MAC in most countries). The lowest level of all heavy metals is always detected in gonads, with higher values in fry compared to milt for copper, zinc, chromium and arsenic. The highest copper concentration is observed in the liver from the souffie which is suggested as a suitable biomonitor for copper intoxication. In muscles of all fish sorts, lead was always present in much higher concentration than cadmium, while in kidneys of most fish sorts, lead and cadmium concentrations were similar. We showed that bioaccumulation of some heavy metals in the fish sorts analyzed is tissue and sex dependent. Also, we concluded that the small water exchange in reversible shallow reservoir does not induce elevated concentration of heavy metals in fish tissues inhabiting Busko Blato.     

Megabenthic decapod crustacean assemblages on the Galician continental shelf and upper slope (north-west Spain)

The structure of megabenthic decapod crustacean assemblages on the Galician (north-west Spain) continental shelf (100 to 200 depth) and upper slope (200 to 500 m) was analyzed based on surveys carried out in autumn and spring, from 1980 to 1987. Forty species belonging to 19 families were caught. The portunid crab Polybius henslowii, a species with pelagic phases, was the most abundant species, but displayed strong spatial and temporal fluctuations. Other dominant species were the Norway lobster Nephrops norvegicus, the portunid Liocarcinus depurator, the galatheids Munida intermedia and M. sarsi, and the shrimps Solenocera membranacea, Plesionika heterocarpus, Pasiphaea sivado and Dichelopandalus bonnieri. Total abundance and biomass (average values excluding Polybius henslowii = 255 individuals and 2.06 kg/30 min tow) and species richness and diversity, H′ (6.85 species and H′ = 1.45 per tow) displayed a significant positive correlation with depth, and strong interannual fluctuations. The factors determining community organization were depth and, to a lesser extent, spatial structure. There was clear evidence of bathymetric zonation, differentiating between species characteristic of the slope (D. bonnieri and Pasiphaea sivado), shelf-slope edge (Macropipus tuberculatus, Pontophilus spinosus, Munida sarsi, S. membranacea, Processa spp.) and shelf (L. depurator, Macropodia tenuirostris, Paguridae and Chlorotocus crassicornis). The spatial zonation was related to changes in oceanography and sediment along the continental margin. Goneplax rhomboides, N. norvegicus, C. crassicornis and Alpheus glaber are benthic species which generally exhibit burrowing behaviour, and they were found mainly in the southern area where there are fine sediments due to the outwelling from the Rías Baixas. Different benthopelagic shrimps (Pontophilus spinosus, Plesionika heterocarpus,Processa spp. and Pasiphaea sivado) were typical of the zone just north of Fisterra, characterized by a convergence of water masses bringing about an increase in productivity due to upwelling. The benthic anomuran and brachyuran crabs Munida intermedia, M.␣sarsi, L.␣depurator and Macropipus tuberculatus were characteristic of the northwestern zone between Fisterra and Estaca, where the infauna reaches high biomass despite coarser sediments with a lower concentration of organic material than in the southern area. Lastly, both the Paguridae and Macropodia tenuirostris were species typically found in the waters in the northern shelf. Based on interannual changes in assemblage structure, two periods could be distinguished: between 1980 and 1984, when Polybius henslowii, D. bonnieri and Pasiphaea sivado had abundance peaks; and another period from 1985 to 1987 when L. depurator, Munida intermedia, M.␣sarsi and Macropipus tuberculatus increased in abundance. Received: 21 May 1996 / Accepted: 9 August 1996     

Lethal critical body residues as measures of Cd,Pb, and Zn bioavailability and toxicity in the earthworm<Emphasis Type="Italic">Eisenia fetida</Emphasis>

Background

Earthworm heavy metal concentrations (critical body residues, CBRs) may be the most relevant measures of heavy metal bioavailability in soils and may be linkable to toxic effects in order to better assess soil ecotoxicity. However, as earthworms possess physiological mechanisms to secrete and/or sequester absorbed metals as toxicologically inactive forms, total earthworm metal concentrations may not relate well with toxicity.

Objective

The objectives of this research were to: i) develop LD₅₀s (total earthworm metal concentration associated with 50% mortality) for Cd, Pb, and Zn; ii) evaluate the LD₅₀ for Zn in a lethal Zn-smelter soil; iii) evaluate the lethal mixture toxicity of Cd, Pb, and Zn using earthworm metal concentrations and the toxic unit (TU) approach; and iv) evaluate total and fractionated earthworm concentrations as indicators of sublethal exposure.

Methods

Earthworms (Eisenia fetida (Savigny)) were exposed to artificial soils spiked with Cd, Pb, Zn, and a Cd?Pb?Zn equitoxic mixture to estimate lethal CBRs and mixture toxicity. To evaluate the CBR developed for Zn, earthworms were also exposed to Zn-contaminated field soils receiving three different remediation treatments. Earthworm metal concentrations were measured using a procedure devised to isolate toxicologically active metal burdens via separation into cytosolic and pellet fractions.

Results and Discussion

Lethal CBRs inducing 50% mortality (LD₅₀, 95% CI) were calculated to be 5.72 (3.54–7.91), 3.33 (2.97–3.69), and 8.19 (4.78–11.6) mmol/kg for Cd, Pb, and Zn, respectively. Zn concentrations of dead earthworms exposed to a lethal remediated Zn-smelter soil were 3-fold above the LD₅₀ for Zn and comparable to earthworm concentrations in lethal Zn-spiked artificial soils, despite a 14-fold difference in total soil Zn concentration between lethal field and artificial soils. An evaluation of the acute mixture toxicity of Cd, Pb, and Zn in artificial soils using the Toxic Unit (TU) approach revealed an LD₅₀ (95% CI) of 0.99 (0.57–1.41) TU, indicating additive toxicity.

Conclusions

Total Cd, Pb, and Zn concentrations in earthworms were good indicators of lethal metal exposure, and enabled the calculation of LD₅₀s for lethality. The Zn-LD₅₀ developed in artificial soil was applicable to earthworms exposed to remediated Zn-smelter soil, despite a 14-fold difference in total soil Zn concentrations. Mixture toxicity evaluated using LD₅₀s from each single metal test indicated additive mixture toxicity among Cd, Pb, and Zn. Fractionation of earthworm tissues into cytosolic and pellet digesis yielded mixed results for detecting differences in exposure at the sublethal level.

Recommendation and Outlook

CBRs are useful in describing acute Cd, Pb, and Zn toxicity in earthworms, but linking sublethal exposure to total and/or fractionated residues may be more difficult. More research on detoxification, regulation, and tissue and subcellular partitioning of heavy metals in earthworms and other invertebrates is needed to establish the link between body residue and sublethal exposure and toxicity.

     

Synthesis of Molecular Imprinting Polymers Separating Toluic Acid Isomers (II)

Polymers that can separate toluic acid isomers were synthesized by molecular imprinting technique. Molecular imprinting polymers (MIPs) for each isomer of toluic acids (TA) were synthesized using styrene and 4-vinylpyridine (4-Vpy). The adsorption characteristics of TA isomers, salicylic acid (SA), and benzoic acid (BA) on each MIP were investigated. The materials used for polymerization of TA isomers MIPs were adsorbed relatively well. This verifies that the MIPs which can adsorb template selectively were synthesized. In addition, the quantities of adsorbed TA isomers on the TA isomers MIPs and on the control polymer polymerized without template were compared and discussed. The variation of adsorption ability for MIPs with repeated use was investigated, showing excellent reproducibility.     

Sustainable Cellular Biocomposites from Natural Fibers and Unsaturated Polyester Resin for Housing Panel Applications

Increased environmental awareness and interest in long-term sustainability of material resources has motivated considerable advancements in composite materials made from natural fibers and resins, or biocomposites. In spite of these developments the lower stiffness and strength of biocomposites has limited their applications to non-load-bearing components. This paper presents an overview of a study aimed at showing that the shortcomings of biocomposites can be overcome through hybrid material designs and efficient structural configurations to make them suitable for load bearing structural components. Hybrid blends of natural and synthetic fibers can significantly improve the characteristics of biocomposites with minimal cost and environmental impact, and hierarchical cellular designs can maximize material efficiency in structural components. Periodic and hierarchical cellular plate designs made from natural fibers and unsaturated polyester resin were evaluated experimentally and analytically. Stiffness, strength, and dimensional stability of all-biocomposite and hybrid natural–synthetic material systems were evaluated through material tests while structural performance of cellular plate designs was assessed through flexural tests on laboratory-scale samples. The experimental results were correlated with analytical models for short-fiber composites and cellular structures. The results showed that biocomposites have adequate short-term performance and that they can efficiently compete with housing panels made from conventional structural materials.     

Preliminary Studies on Converting Agricultural Waste into Biodegradable Plastics—Part IV: Polysaccharide Containing Natural Materials

Corn distillers’ dry grain, corncob powder, hardwood powder, and sugar beet pulp were separately anionized by oxidation with sodium hypochlorite in aqueous solution. Solid reaction products instantly precipitated upon admixing each of the above-oxidized materials with soy protein isolate. Infrared spectra and differential scanning calorimetry supported the hypothesis that soy protein isolate complexed with all of the above-oxidized polysaccharides. Reaction products with either oxidized corn distillers’ dry grain or oxidized sugar beet pulp provided hard, brittle pellets with tensile strengths as high as 9.5 MPa, suggesting that these materials could be viable as biodegradable plastics.     

Role of Amino Acids on <Emphasis Type="Italic">In Situ</Emphasis> Photografting of Jute Yarn with 3-(Trimethoxysilyl) Propylmethacrylate

To improve the mechanical performance of natural lignocellulosic jute yarn, grafting with [3-(trimethoxysilyl) propylmethacrylate] (TMSPM) monomer has been performed on in situ UV radiation and optimized the monomer concentration (30%) and irradiation time (30 min). Effect of various amino acids (1%) as additives in TMSPM with photografted jute yarn at optimized system has been studied. The polymer loading (PL) and tensile properties like tensile strength (TS) and elongation at break (Eb) of treated samples were enhanced by incorporation of amino acids and the highest properties (TS = 300% and Eb = 386%) achieved by the sample treated with l-Arginine (Arg) with 32.5% PL value. Weak acid like 3% acetic acid and inorganic acid like 1% sulfuric acid were also incorporated in the optimized system of TMSPM grafting and compared their effect on the tensile properties with amino acid treated samples. Water absorption and weathering resistance of treated and untreated samples were also performed and treated sample showed lesser water uptake as well as less weight loss and mechanical properties as compared to untreated samples.     

Leachability testing of metallic wastes.

The performance of two tests, a batch test and a percolation test for the characterization of waste as suggested in the EU council decision 2003/33/EC was investigated. The tests were carried out on two solid waste streams from a metal recycling industry. The concentrations of heavy metals such as Cu, Zn and Pb were more than one order of magnitude lower than the proposed limit values. Generally, batch test values were equal or higher than percolation test values. With the proposed test procedures both materials could be considered as non-dangerous wastes. The test performance was also investigated using a leachant with higher ionic strength instead of demineralized water as prescribed. The results clearly show a significant increase in the concentration of some heavy metals. Total concentrations of phenolic compounds and polychlorinated biphenyls were less than 1 p.p.m. and 2 p.p.b., respectively. The precision of the batch and the percolation tests were on average 48 and 35%, respectively.     

Environmental Impact Assessment of Polylactide(PLA)/Chicken Feathers Biocomposite Materials

The aim of this study is to analyse the environmental impacts (EIs) of the process of preparation of new biocomposite materials obtained from polylactide (PLA) and chicken feathers (CFs). Two CFs stabilization methods and different percentages of CFs have been studied. The EIs of these new composites were compared to the impact of virgin PLA. Cradle-to-gate life cycle inventories were assessed for 0–35% v/v of CFs in a CFs/PLA biocomposite. Two CFs stabilization processes, autoclave and surfactant, were tested and compared with the aim to prioritize one of them from the environmental point of view. A composite plate of 184?×?184?×?2.2 mm³ was defined as the functional unit. Autoclave stabilization process exhibited lower environmental impact compared with surfactant stabilization process mainly due to both the lower requirements of electricity and water and the reduced pollution loads of the generated wastewater. Thus, the autoclave process was selected as the standard method when comparing the EIs of the proposed CFs/PLA biocomposites. In this sense, the addition of CFs to PLA matrix proportionally reduces all the EIs compared to pure PLA due to the replacement of PLA with CFs. This behaviour can be explained because the PLA production accounts for the 99% of the impact of the biocomposite. Consequently, CFs conveniently stabilized might be an alternative raw material to prepare CFs/PLA biocomposites with less environmental impact compared to pure PLA.