掘进面出风口风流与风幕调控下的粉尘分布响应曲面优化研究*

为了解决煤矿掘进面风筒出风口参数不能动态变化,而传统风幕全断面控尘效果不理想引起的粉尘浓度高等问题,通过分析风幕和出风口参数对粉尘分布规律的影响,以此得到合理的出风口风流与风幕综合调控方案,降低粉尘浓度。以陕西神木柠条塔煤矿N1212巷道为研究对象,利用Fluent软件建立出风口风流与风幕综合调控的粉尘场有限元模型,设计出风口风流及风幕综合调控响应曲面实验,得到最佳综合调控方案为:风幕射流出口宽度为0.16 m,风幕射流出口速度为6 m/s,出风口口径为0.9 m,出风口右偏角度为3°。搭建相似模拟实验平台来验证最佳综合调控方案,研究结果表明:调控后回风侧行人呼吸处和司机位置处粉尘平均浓度分别降低89%和81%,有效改善掘进面作业环境。     

Classification and comparison of municipal solid waste based on thermochemical characteristics

Municipal solid waste (MSW) has been normally sorted into six categories, namely, food residue, wood waste, paper, textiles, plastics, and rubber. In each category, materials could be classified further into subgroups. Based on proximate and ultimate analysis and heating value, statistical methods such as analysis of variance (ANOVA) and cluster analysis were applied to analyze the characteristics of MSW in every subgroup and to try to distinguish their relative properties. The chemical characteristics analysis of MSW showed that polyethylene (PE), polypropylene (PP), and polystyrene (PS) had the highest volatile matter content, with almost no ash and fixed carbon, while polyethylene terephthalate (PET) had high carbon content but low hydrogen content. Bones and vegetables had the highest ash content, while nutshells and rubber had the highest fixed carbon content. Paper and starch food had the highest oxygen content, and wool and bones had the highest nitrogen and sulfur content. Polyvinyl chloride (PVC) had the highest chlorine content at about 55%. PE, PP, and PS had the highest heating value, followed by chemical products such as rubber and chemical fiber. Conversely, paper, vegetables and bones had the lowest heating value. The results of cluster analysis of MSW components showed that fruit peel, weeds, wood, bamboo, leaves and nutshells could be classified as the lignocellulose category; starch food, cotton, toilet paper, printing paper and cardboard could be classified as the glucose monomer category; wood and chemical fiber could be classified as the high nitrogen and sulfur category; and PE, PP, and PS could be cluster as the polyolefin category.

Implications: The yield of municipal solid waste (MSW) is constantly increasing and waste to energy (WTE) has been used extensively all over the world. During the processes of incineration, pyrolysis, or gasification, the impact of physical and chemical properties of MSW is of great significance. However, the traditional classification of MSW is too general to provide more detailed information in many investigations. It is necessary to perform the investigation of characteristics of combustible MSW to distinguish different categories of MSW and find out their subclassification.     

Characterization of PM(2.5) collected during broadcast and slash-pile prescribed burns of predominately ponderosa pine forests in northern Arizona

Prescribed burning, in combination with mechanical thinning, is a successful method for reducing heavy fuel loads from forest floors and thereby lowering the risk of catastrophic wildfire. However, an undesirable consequence of managed fire is the production of fine particulate matter or PM(2.5) (particles ≤2.5 μm in aerodynamic diameter). Wood-smoke particulate data from 21 prescribed burns are described, including results from broadcast and slash-pile burns. All PM(2.5) samples were collected in situ on day 1 (ignition) or day 2. Samples were analyzed for mass, polycyclic aromatic hydrocarbons (PAHs), inorganic elements, organic carbon (OC), and elemental carbon (EC). Results were characteristic of low intensity, smoldering fires. PM(2.5) concentrations varied from 523 to 8357 μg m(-3) and were higher on day 1. PAH weight percents (19 PAHs) were higher in slash-pile burns (0.21 ± 0.08% OC) than broadcast burns (0.07 ± 0.03% OC). The major elements were K, Cl, S, and Si. OC and EC values averaged 66 ± 7 and 2.8 ± 1.4% PM(2.5), respectively, for all burns studied, in good agreement with literature values for smoldering fires.     

武钢金山店铁矿某通风系统项目评估

介绍了金山店铁矿通风系统多级站和机站设计；阐述了该项目的施工，检测及通风效果评估情况；对安全生产提出了全面，系统的建议。     

液化气运输过程中的危险分析

应用各种爆炸后果估计模型对液化气运输过程中的爆炸后果进行了评估，并用ETA分析方法对存在的危险进行了分析，指出了控制措施。     

聚合氯化铝铁在纺织印染废水处理中的应用

主要探讨聚合氯化铝铁（PAFC）在纺织印染废水处理的应用,并对影响絮凝效果的主要因素,如投加量、pH值等进行研究,找出最佳反应条件.     

盐度对模拟餐厨垃圾发酵液产聚羟基脂肪酸酯工艺的影响

利用餐厨垃圾发酵液生产聚羟基脂肪酸酯(PHA)可以在废物处理的同时实现有价资源回收。为探究发酵液中盐分对产PHA菌群富集过程的影响,以模拟餐厨垃圾发酵液为底物,研究了盐度存在下污泥理化性质、富集过程主要指标及菌群PHA合成能力等变化。结果表明,未经盐度富集的菌群易受到盐度抑制,在15 g·L⁻¹的盐度条件下,污泥PHA最大合成量可降至39.9%。富集过程中盐度的增加有利于污泥沉降性的提升,低盐度(5 g·L⁻¹)下菌群分泌胞外聚合物量最多,达49.8 mg·g⁻¹(以VSS计),对菌群保护能力最强。不同盐度条件下的富集系统皆能保持较好的生态选择压力,但盐度对微生物生长的抑制随着浓度的增大而增强。经过盐度存在下长期富集后的污泥,在高盐度(10、15 g·L⁻¹)底物条件下,仍能获得较高的PHA最大合成能力,但其较低的生长活性不利于最终PHA产量的提升,短期富集下,高盐度会抑制PHA的合成;而低盐度(5 g·L⁻¹)有助于提高PHA合成能力,最高达50.5%。     

不同工况条件混合赤泥力学特性变化规律

在利用常规土工实验和XRF、XRD、SEM等微观测试手段分析了刚出厂混合赤泥化学成分、矿物组成、微观结构的基础上,通过无侧限抗压强度实验和固结排水三轴剪切实验对自然风干、浸水饱和、非饱和-饱和干湿循环3种工况条件下混合赤泥不同龄期力学特性的变化规律进行了研究。结果表明,自然风干试样的无侧限抗压强度和粘聚力要明显大于相同龄期浸水饱和试样和干湿循环试样,说明混合赤泥的强度形成与滤水过程有一定联系,且其强度的增长均主要集中在脱水龄期前70天内;混合赤泥在3种不同工况条件下无侧限抗压强度和粘聚力均有一定程度的增长,说明混合赤泥可在浸水环境下生成不可逆增长的具有水硬性的胶结矿物,使其在水环境中不发生崩解,可保证混合赤泥堆体在自然堆存过程中其力学特性满足安全堆载要求。     

人工湿地基质中腐殖质的积累与分布特点

腐殖质来源于生物残体的降解,可参与多种污染物迁移转化,具有重要环境生态效应。本研究以常见的水平潜流和垂直流2种系统为研究对象,探讨了以无机基质为主构建的常规人工湿地中腐殖质的积累与分布特点。研究结果表明,随着污水处理运行,水平潜流和垂直流人工湿地中,大部分基质中腐殖质全碳量均有增加,水平潜流系统含量在1.7~18 g/kg, 垂直流系统在1.9~7.5 g/kg;胡敏素是各系统腐殖质的主体组成,含量最高,水平潜流系统含量在1.55~17.22 g/kg,垂直流系统在1.43~7.21 g/kg。腐殖质另外2种组分,富里酸和胡敏酸碳含量都比较低,水平潜流系统富里酸碳含量在0~0.68 g/kg,胡敏酸碳含量0.008~0.26 g/kg;垂直流系统富里酸碳含量在0.015~0.38 g/kg,胡敏酸碳含量在0.05~0.15 g/kg,各系统中富里酸碳含量均高于胡敏酸碳含量;各系统中,根系基质腐殖质全碳及3种组分含量都显著高于非根际基质;不管是水平潜流还是垂直流,低水力负荷系统的比高水力负荷系统更高。     

取芯过程中煤芯温度分布特征模拟研究*

针对取芯过程瓦斯解吸受煤芯的温度影响不明,造成煤层瓦斯含量测不准的问题,开展对取芯过程煤芯温度分布特征研究。采用自主研制的取芯管自动测温装置在赵固二矿原生结构煤层（f=1.71）进行深度20 m的取芯试验,获得取芯管管壁温升变化规律,变化曲线分为4个阶段:缓慢上升、加速上升、减速上升、缓慢下降阶段;应用COMSOL建立含瓦斯煤传热模型,将管壁的温度变化设置为边界条件,模拟取芯过程煤芯与管壁之间的热交换。结果表明:在取芯时间30 min内,煤芯平均温度快速上升,之后上升速度趋于平稳;在煤芯内,相同时刻,等间距的轴向与径向距离,径向较轴向的温度梯度较大,径向传导快于轴向传导;取芯过程煤芯径向温度Ta与径向距离d、时间t满足指数函数关系。研究结果可为测定取芯过程煤芯的瓦斯损失量提供参考依据。