Improvements of nano-SiO2 on sludge/fly ash mortar

Sewage sludge ash has been widely applied to cementitious materials. In this study, in order to determine effects of nano-SiO(2) additives on properties of sludge/fly ash mortar, different amounts of nano-SiO(2) were added to sludge/fly ash mortar specimens to investigate their physical properties and micro-structures. A water-binding ratio of 0.7 was assigned to the mix. Substitution amounts of 0%, 10%, 20%, and 30% of sludge/fly ash (1:1 ratio) were proposed. Moreover, 0%, 1%, 2%, and 3% of nano-SiO(2) was added to the mix. Tests, including SEM and compressive strength, were carried out on mortar specimens cured at 3, 7, and 28 days. Results showed that sludge/fly ash can make the crystals of cement hydration product finer. Moreover, crystals increased after nano-SiO(2) was added. Hence, nano-SiO(2) can improve the effects of sludge/fly ash on the hydration of mortar. Further, due to the low pozzolanic reaction active index of sludge ash, early compressive strengths of sludge/fly ash mortar were decreased. Yet, nano-SiO(2) could help produce hydration crystals, which implies that the addition of nano-SiO(2) to mortar can improve the influence of sludge/fly ash on the development of the early strength of the mortar.     

Variations of metal distribution in sewage sludge composting

In the study, the variations of heavy metal distributions (of Cu, Mn, Pb, and Zn) during the sewage sludge composting process were investigated by sequential extraction procedures. The total content of Cu and Zn in the composted mixture increased after the composting process. Mn and Zn were mainly found in mobile fractions (exchangeable fraction (F1), carbonate fraction (F2), and Fe/Mn oxide fraction (F3)). Cu and Pb were strongly associated with the stable fractions (organic matter/sulfides fraction (F4) and residual fraction (F5)). These five metal fractions were used to calculate the metal mobility (bioavailability) in the sewage sludge and composted mixture. The mobility (bioavailability) of Mn, Pb, and Zn (but not Cu) increased during the composting process. The metal mobility in the composted mixture ranked in the following order: Mn>Zn>Pb>Cu.     

底泥中重金属毒性的室内孔隙水分析技术

根据孔隙水中重金属的浓度可以判定底泥中重金属的毒性但获得真正的底泥孔隙水十分困难。本文提供了一套简便易行的室内原状孔隙水取样技术,将碳化硅砂芯埋入底泥,添加表层水并静置９０ｄ,通过渗滤获得孔隙水,测定孔隙水中重的浓度,所得结果与微生态系统暴露试验中生物指示的重金属的毒性大小相吻合,与生物积累重金属的浓度显著正相关。     

青岛海洋环境碳纤维复合材料与低合金钢电偶腐蚀研究

目的 探究碳纤维复合材料在舰船应用时与金属材料的电偶腐蚀问题。方法 针对一种典型舰船用碳纤维增强乙烯基树脂复合材料,在青岛海洋大气环境下开展0.5、1、1.5、2 a期的自然曝晒试验,进而采用电化学分析手段考察其与低合金钢的电偶腐蚀效应,结合老化机制探究碳纤维复合材料的老化行为对其与钢电偶腐蚀的影响。结果及结论 在青岛大气环境曝晒不同周期的复合材料试样,开路电位与低合金钢相差较大,存在较高的电偶腐蚀倾向。随曝晒时间的延长,复合材料表面微裂纹不断产生、扩展,导致电化学反应活性点增多,两者电偶电流密度随之增大。在青岛海洋大气环境下暴露2 a后,碳纤维增强乙烯基树脂复合材料与低合金钢的电偶电流为0.356 9 μA/cm²,两者的电偶腐蚀敏感性达到B级。     

六氯苯和重金属复合污染沉积物的电动力学修复研究

以某化工厂排污沟渠中受六氯苯(hexachlorobenzene,HCB)、锌和镍复合污染的实际沉积物为对象,研究非离子表面活性剂OP-10对沉积物中污染物的增溶解吸效果和电动力学修复污染物的强化迁移效果。解吸实验结果表明:OP-10对HCB增溶解吸效果较好,对重金属离子的解吸有一定的促进作用。电动力学修复发现,随电渗析流进入沉积物中的OP-10很快的吸附在靠近阳极沉积物上,从而阻碍了助剂的输送并影响HCB的迁移,而靠近阴极区域沉积物中的有机质迁移会促进HCB的去除。沉积物pH变化引起的重金属沉淀是制约锌迁移的主要因素。镍的整体迁移效果不明显。     

聚磷激酶基因在假单胞菌中的整合和表达

为了构建高效除磷的微生物,将来源于大肠杆菌的聚磷激酶基因(ppk)插入广宿主载体pBBR1MCS-2多克隆位点区,得到质粒pBBR1MCS-2-ppk.以该质粒为模板,通过PCR扩增出携带有载体启动子和终止子序列的ppk基因,插入自杀型质粒pUTmini-Tn5中得到重组质粒pUTmini-Tn5-ppk.pUTmini-Tn5-ppk经三亲接合作用进入Pseudomonas putidaKT2440,同时mini-Tn5通过转座作用将ppk整合到宿主菌株的染色体DNA中,获得基因工程菌Pseudomonas putidaKT2440-PPK,用于表达ppk.RT-PCR结果显示,ppk基因在KT2440-PPK中得到较高量的表达,而在原始菌株KT2440中表达微弱.人工模拟污水实验结果表明,接种1 h时KT2440-PPK中聚磷含量达到最大,为3.05 mg/g,约是对照菌株KT2440的15倍.测定模拟污水中磷酸盐的含量表明,KT2440-PPK可以去除该模拟污水中90%以上的磷酸盐.     

中药抗菌剂对费氏弧菌的单一及联合毒性效应

抗生素滥用所导致的环境问题日益受到人们的关注,寻找传统抗生素的可能替代品迫在眉睫.从中药中提取的具有抗菌活性的化合物(简称中药抗菌剂)因具有资源丰富、抗菌谱广和不良反应低等特点,有望成为未来替代抗生素的关键.因此,有必要探究中药抗菌剂的毒性效应,这可以对未来中药抗菌剂使用后的生态风险提供指导.本文以费氏弧菌作为模式生物...     

液晶显示器液晶处理与铟回收技术

在实验室条件下,对液晶显示器回收的各个重要环节作了初步的探索,提出了一整套回收工艺.其中包括利用丙酮常温浸取去除偏光片、分离玻璃基板、溶解液晶,还包括利用硫酸溶液和二氧化锰联合浸取玻璃基板,铟的浸取率达89%.得到的铟的酸液经过萃取、置换和电解,可以得到铟的产品,为液晶显示器的资源化和无害化提供实验数据和技术支持.     

废纸造纸废水结垢原因及防治对策研究

针对无锡某废纸造纸企业产生的污水经厌氧-好氧-化学混凝处理后,出水在放流池产生结垢现状,对各段污水中主要离子浓度进行跟踪分析,并对结垢的组分、结垢原因、机理和防治结垢对策进行了探讨。结果表明:垢样的主要成分为CaCO3;污水中含有较高浓度的钙离子和碳酸氢根离子是导致结垢的主要原因,较高的水温、pH值、流速、流动状态、池壁的粗糙程度以及PAC的投加对结垢也有一定的影响;最佳防治对策为使用Ca(OH)2+PAM代替PAC+PAM混凝,保证COD达标排放同时,也解决了出水结垢问题。     

农村环境污染控制区划方法与应用研究

针对农村环境污染发生的广域性、分散性和随机性等特征,采用清单分析法,核算了农村环境污染物COD、TN、TP排放量和排放浓度,并以环境污染敏感性评价和污染类型划分为研究基础,探讨了农村环境污染控制区划方法,提出了区划原则、分区方法和命名方法.采用上述方法,在江苏省进行了应用研究,将江苏省农村环境污染控制区共划分为3个一级区和13个二级区,对不同级区实施分区管理和分类控制,分区结果可以为农村环境污染控制决策提供科学依据.