Community structure and biotic integrity of aquatic plants along the North Canal in Beijing北大核心CSCD

Aquatic plants along the North Canal in Beijing were studied to identify the community structure of aquatic plants and vegetation index of biotic integrity (VIBI), and to provide scientific basis for the management and protection of urban rivers. Aquatic plants from 49 sampling sites along the North Canal were investigated during June 2015. Based on the field data, distributing range analysis, discriminatory power analysis, and correlation analysis were used stepwise to select core metrics from candidate metrics to establish the VIBI assessment system. The VIBI value of each sampling site was calculated as the average of the scaled values of all core metrics. Thirty-six aquatic plant species, including 14 hygrophytes, 13 emergent species, 6 submergent species, 2 floating-leaved species, and 1 floating species were collected. Species diversity was low in the North Canal, and no aquatic plants were recorded in 28 sampling sites, of which 9 sampling sites were dried up. Five sites were in excellent condition (VIBI > 0.60), 5 were good (0.60 > VIBI > 0.38), 7 were fair (0.38 > VIBI > 0.23), and 4 were poor (VIBI < 0.23). Based on the distribution of VIBI, Shahe River and Wenyu River upstream, and Fenghe River located in suburbs had a higher VIBI. Downstream tributaries, such as Qinghe River, Bahe River, and Liangshui River, had a lower VIBI. Correlation analysis showed that habitat quality, habitat complexity, and vegetation diversity along riparian zones were the important factors affecting VIBI along the North Canal, Beijing. Aquatic plants along the North Canal showed low species diversity owing to human disturbance. VIBI along tributaries with limited disturbance from human activities was higher; however, VIBI along tributaries disturbed by frequent human activities was lower. © 2018 Science Press. All rights reserved.     

Kinetic studies of the reaction of hydroxyl radicals with trichloroethylene and tetrachloroethylene

Rate coefficients are reported for the gas-phase reaction of the hydroxyl radical (OH) with C2HCl3 (k(1)) and C2Cl4 (k2) over an extended temperature range at 740+/-10 Torr in a He bath gas. These absolute rate measurements were accomplished using a laser photolysis/laser-induced fluorescence (LP/LIF) technique under slow flow conditions. The simple Arrhenius equation adequately describes the low temperature data for k1 (<650 K) and the entire data set for k2 and is given by (in units of cm3 molecule(-1) s(-1)): k1(291 - 650 K) = (9.73+/-1.15) x 10(-13) exp (158.7+/-44.0)/T, k2(293 - 720 K ) = (1.53+/-0.14) x 10(-12) exp (-688.2+/-67.5)/T. Error limits are 2sigma values. The room temperature values for k1 and k2 are within +/-2sigma of previous data using different techniques. The Arrhenius activation energies for k1 and k2 are a factor of 2-3 lower than previously reported values. The experimental measurements for both k1 and k2 in conjunction with transition state and variation transition state theory calculations infer an OH addition mechanism. The lack of a measurable kinetic isotope effect for k1 is consistent with this mechanism. Insight into the subsequent reactions of the chemically activated intermediate are presented in the form of potential energy diagrams derived from ab initio calculations.     

Recovery elemental sulfur from calcium sulfide prepared by red gypsum in sulfuric acid wastewater treatment

Journal of Material Cycles and Waste Management - Red gypsum comes from TiO2 production industry by sulfate method, which comes from the low acidic liquid stream treatment using lime or limestone....     

Fabrication of PVA/GO Nanofiber Films by Electrospinning: Application for the Adsorption of Cu2+ and Organic Dyes

Journal of Polymers and the Environment - In recent years, the treatment of water pollution has been a challenging and far-reaching topic. In order to improve the adsorption performance of...     

A Highly Efficient Adsorbent Based on Starch-Graphene Oxide Architecture for Scavenging Aqueous Pb(II): Isotherms,Kinetics, Thermodynamics and Interaction Mechanism

Journal of Polymers and the Environment - Heavy metal pollution stems from the modern industry is a severe environmental problem. In this work, a highly efficient adsorbent based on starch-graphene...     

Investigation of indole biodegradation by Cupriavidus sp. strain IDO with emphases on downstream biotransformation and indigo production

Environmental Science and Pollution Research - Indole, as a typical N-heterocyclic aromatic pollutant, poses risks to living things; however, indole-biotransformation mechanisms remain...     

Fluoride contamination,spatial variation,and health risk assessment of groundwater using GIS: a high-density survey sampling in Weifang City,North China

Environmental Science and Pollution Research - The present study, with the aid of GIS, utilizes high-density groundwater (GW) sampling data (1398 samples) to analyze the spatial variation...     

Biozide in Gebäudefassaden – ökotoxikologische Effekte, Auswaschung und Belastungsabschätzung für Gewässer

Background, aim and scope Sources of organic micropollutants occuring in surface waters are often unknown. Regarding environmental risk assessments for surface waters, construction materials have as till now, not been given much consideration, although biocides used as preservatives are known to reach urban storm water runoff. The study focused on biocides for facades coatings and aimed (1) to determine ecotoxicological effect values, (2) to quantify the leaching behaviour and (3) to assess the environmental risk for surface waters using a dynamic transport model. Materials and methods Eight biocides used in resin based facade coatings were investigated. Some biocides are substances known as pesticides for agricultural purposes like diuron, carbendazim and terbutryn. Ecotoxicological effect values for aquatic organisms were determined for every biocide. Leaching of four biocides from a render under UV-irradiation has been investigated in the laboratory including the influence of varying temperatures. Using 80 irrigation intervals over 28 days, facade runoff was sampled and followed by biocide chemical analysis. The total losses were calculated based on the concentration patterns. These data were used for modelling the transport of cybutryn from facades to surface waters. Biocide specific effect values and leaching characteristics have been taken into consideration. Results Acute and chronic effect values as well as predicted no effect concentrations for the investigated biocides indicate their high potential to affect aquatic organisms. The leaching of four biocides (diuron, terbutryn, cybutryn, carbendazim) from the facade render under the experimental conditions delivers high concentrations in the beginning followed by an exponential decrease. Rising temperature increased the concentration of biocides in the runoff. The total losses were between 7?% and 29?% depending on the substances. More than half of the losses occur in the runoff within the first 15 min of runoff from a 60 min irrigation cycle. The modelling result for cybutryn underlines its high environmental risk for small surface waters. Discussion The leaching of the biocides, their potential ecotoxic effects and persistence show clearly that the environmental risk for surface waters and soils seems to be high for certain biocides; whereas for others the risk seems to be significantly lower. With respect water quality criteria, polluted facades runoff has to be diluted before runoff can enter the discharge. Diuron and carbendazim are however also used as pesticides and preservatives for other materials and cybutryn is also used as an antifouling agent. All pathways have to be evaluated in order to identify relevant sources and to act more efficiently with respect to water and soil protection. Conclusions Concentrations with high environmental risk are expected at new facades, especially at facades with thermal insulation. With the given low predicted no effect concentrations in a range of a few ng/L and large amounts of biocides applied in paints and renders, the environmental risk for common biocides used in facade coatings has to be investigated in laboratory and field scale. It seems plausible that source control measures as the most efficient and sustainable precautionary principle need to be evaluated. Recommendations and perspectives Biocides and additives applied in construction materials have to be taken into consideration as relevant sources when evaluating the quality of storm water runoff, discharge into urban areas and the impact to soil and surface waters. A sustainable construction material management and storm water management are required. It is expected that ongoing laboratory and field studies with exterior paints, renders and flat sheets for waterproofing containing biocides and additives will give further insight into their environmental impact.     

Optimising the preparation of activated carbon from digested sewage sludge and coconut husk.

Preparation of activated carbon from sewage sludge is a promising way to dispose of sewage sludge as well as to produce a low-cost adsorbent for pollutant removal. This research work aimed to optimise the condition for activated carbon preparation from anaerobically digested sewage sludge with the additive coconut husk. The sewage sludge sample was mixed with the additive coconut husk. The preparation condition variables investigated involved the concentration of the ZnCl2 solutions, heating temperature, dwell time and heating rate in pyrolysis and the mixing ratio of coconut husk to sewage sludge. Surface area, pore size distribution, aqueous phenol adsorption capacity and the production yield of the final products were determined and compared. Experimental results revealed that low concentrations of ZnCl2 solution tended to improve the microporosity of the final product. Heating temperature had a considerable impact on the surface area, pore size distribution and phenol adsorption capacity of the final products, whereas dwell time and heating rate performed comparatively insignificantly. The effect of increasing the mixing ratio of coconut husk to sewage sludge was principally to increase the microporosity of the final products. The activated carbon with the highest BET surface area was produced with the activation of 5 M ZnCl2 solution and, thereafter, pyrolysis at a heating temperature of 500 degrees C for 2 h with a heating rate of 10 degrees C/min. The mixing ratio of 1:4 in terms of coconut husk to sewage sludge based on their dried weights was found to be most cost effective.     

新型固定床生物膜反应器硝化性能的研究

本文以无纺布作为硝化反应器的填料 ,对其硝化负荷能力进行了探讨 ,同时对硝化过程中亚硝酸盐氮积累和影响氨氮去除的原因进行了分析。在NH3 N容积负荷为 1 .7kg/(m3·d)的情况下 ,可实现 98%以上的NH3 N去除率。溶解氧浓度为 4mg/L ,进水氨氮浓度为 30 0mg/L时硝化柱内开始出现亚硝酸盐氮积累 ,通过加大曝气量等措施可在一定程度上消除其影响。停止运行两个半月后 ,可在一周内基本恢复硝化功能。