Polycyclic aromatic hydrocarbons (PAHs) in the aerosol in Beijing, China, measured by aminopropylsilane chemically-bonded stationary-phase column chromatography and HPLC/fluorescence detection

We developed a useful analytical method for the determination of polycyclic aromatic hydrocarbons (PAH) concentrations in the aerosol of China. We used an accelerated solvent extraction (ASE) method for the extraction of PAHs from the aerosol samples, in order to reduce the extraction time and the solvent volume used. The optimum purification method was developed, with aminopropylsilane chemically-bonded stationary-phase column chromatography, in order to remove many co-extractives which cannot be removed by conventional purification methods using silica-gel column chromatography. HPLC/fluorescence detection (FLD) was adopted as the analytical method, because it has very high sensitivity to PAH and it is easy to install, operate, and maintain as compared with GC/MS. With the analytical method developed in this study, the recovery and precision (RSD) for most of the PAHs ranged from 75% to 129% and from 2.8% to 22.7%, respectively. The concentrations of PAHs in the aerosol samples collected from October 2003 to April 2005 in Beijing, China were determined using the newly developed method. SigmaPAHs, which is the sum of the concentrations of all detected PAHs, was 177.8 +/- 239.9 ng m(-3) (n = 64). The SigmaPAHs concentration in the heating season (305.1 +/- 279.0 ng m(-3), n = 33) was 7.2 times higher than that in the non-heating season (42.3 +/- 32.0 ng m(-3), n = 31). These strong seasonal variations in atmospheric PAH concentration are possibly due to coal combustion for residential heating in winter.     

Methods for the preparation of a biodesulfurization biocatalyst using Rhodococcus sp

Several methods to prepare a biodesulfurization (BDS) biocatalyst were investigated in this study using a strain of Rhodococcus sp. 1awq. This bacterium could selectively remove sulfur from dibenzothiophene (DBT) via the "4S" pathway. DBT, dimethylsulfoxide (DMSO), sodium sulphate and mixed sulfur sources were used to study their influence on cell density, desulfurization activity, desulfurization ability, and the cost of biocatalyst production. In contrast to that observed from bacteria cultured in DBT, only partial desulfurization activity of strain 1awq was induced by DBT after cultivation in a medium containing inorganic sulfur as the sole sulfur source. The biocatalyst, prepared from culture with mixed sulfur sources, was found to possess desulfurization activity. With DMSO as the sole sulfur source, the desulfurization activity was shown to be similar to that of bacteria incubated in medium with DBT as the sole sulfur source. The biocatalyst prepared by this method with the least cost could remove sulfur from hydrodesulfurization (HDS)-treated diesel oil efficiently, providing a total desulfurization percent of 78% and suggesting its cost-effective advantage.     

Arsenic chemistry in the rhizosphere of Pteris vittata L. and Nephrolepis exaltata L

This greenhouse experiment evaluated the influence of arsenic uptake by arsenic hyperaccumulator Pteris vittata L. and non-arsenic hyperaccumulator Nephrolepis exaltata L. on arsenic chemistry in bulk and rhizosphere soil. The plants were grown for 8 weeks in a rhizopot with a soil containing 105 mg kg(-1) arsenic. The soil arsenic was fractionated into five fractions with decreasing availability: non-specifically bound (N), specifically bound (S), amorphous hydrous-oxide bound (A), crystalline hydrous-oxide bound (C), and residual (R). P. vittata produced larger plant biomass (7.38 vs. 2.32 mg plant(-1)) and removed more arsenic (2.61 vs. 0.09 mg pot(-1) arsenic) than N. exaltata. Plant growth reduced water-soluble arsenic, and increased soil pH (P. vittata only) in the rhizosphere soil. P. vittata was more efficient than N. exaltata to access arsenic from all fractions (39-64% vs. 5-39% reduction). However, most of the arsenic taken up by both plants was from the A fraction (67-77%) in the rhizosphere soil, the most abundant (61.5%) instead of the most available (N fraction).     

应用重组孕激素基因酵母测定饮用水中内分泌干扰物的方法

研究了用重组孕激素受体基因酵母测定饮用水中内分泌干扰物的方法,并利用该种方法检测了南方某水厂不同处理工艺过程水样对孕激素受体活性的抑制水平.结果表明,重组孕激素受体基因酵母能够与孕激素专一性的结合,诱导产生明显的剂量-效应关系,EC₅₀值为0.5 nmol/L,具有较高灵敏度;环境内分泌干扰物五氯酚和壬基酚具有孕激素受体抑制活性,其IC₅₀值分别为2.4μmol/L和3.7μmol/L;重组孕激素受体基因/报道基因的酵母技术是一种筛选和定量分析具有孕激素受体抑制活性的内分泌干扰物的快速、有效方法.结合固相萃取的前处理技术,重组孕激素受体基因酵母对水厂不同处理工艺水样检测出明显的孕激素受体抑制活性,抑制率均大于58%,表明重组孕激素受体基因酵母检测技术能够快速监测和鉴别水样中具有抑制孕激素受体活性的物质.     

三丁基氯化锡对红鳍笛鲷的急性毒性及不同组织生化指标的影响

为研究有机锡化合物对海洋生物抗氧化防御系统和神经系统的影响,以我国东南沿海常见的中下层增养殖鱼类红鳍笛鲷(Lutjanus erythopterus)幼鱼为实验生物,采用半静态毒性实验方法,分别研究了三丁基氯化锡(tributyltin chloride,TBTCl)的急性毒性和96 h暴露时间内对红鳍笛鲷幼鱼鳃、脑和...     

纳米Al_2O_3和Cd联合暴露对铜锈环棱螺体内Cd的生物积累和抗氧化酶活性的影响

金属氧化物纳米颗粒的广泛应用导致它们大量地释放到水环境中,其独特的理化性质有可能改变水环境中其他共存污染物(如重金属)的生态毒性。为评价沉积物中纳米氧化铝(Al2O3-NPs)对重金属Cd生态毒性的影响,采用底栖生物慢性暴露研究了Al2O3-NPs存在条件下Cd在底栖动物铜锈环棱螺体内生物积累的变化和Cd对肝胰脏抗氧化防御系统关键成分超氧化物歧化酶(SOD)与脂质过氧化指标丙二醛(MDA)以及Ⅱ相反应的关键酶谷胱甘肽-S-转移酶(GST)的影响。结果表明,低Cd浓度(5μg·g-1)时,Al2O3-NPs对Cd生物积累没有影响;中、高Cd浓度(25、100μg·g-1)时,Al2O3-NPs显著促进Cd的生物积累,Al2O3-NPs对Cd的生物转运具有明显的携带效应。低Cd浓度时,无Al2O3-NPs处理组和Al2O3-NPs处理组的SOD活性与对照组相比均没有显著差异;中Cd浓度时,SOD活性显著升高,而高Cd浓度时,SOD活性显著下降,而且Al2O3-NPs处理组的SOD活性显著低于无Al2O3-NPs处理组,Al2O3-NPs的存在加重了Cd对肝胰脏细胞的氧化胁迫或损伤。高Cd浓度时,无Al2O3-NPs处理组和Al2O3-NPs处理组的MDA水平均显著升高,但Al2O3-NPs处理组的MDA水平显著低于无Al2O3-NPs处理组,进一步证明Al2O3-NPs对Cd氧化损伤的增强作用。中、高Cd浓度时,无Al2O3-NPs处理组和Al2O3-NPs处理组的GST活性均显著下降,但Al2O3-NPs处理组的GST活性均显著低于无Al2O3-NPs处理组,同样说明了Al2O3-NPs对Cd毒性的增强作用。本研究提供了在沉积物-底栖动物体系中Al2O3-NPs促进重金属生物积累的证据,而且Cd毒性的变化与肝胰脏中Cd的生物积累水平的变化基本一致,在中、高Cd浓度下,由于Al2O3-NPs的存在显著促进了Cd的生物积累,因而增强了Cd对铜锈环棱螺的生态毒性。     

矿区采空塌陷的治理

枣庄地处山东南部,紧邻苏鲁交界至南黄海地震重点防御区,同时又是煤炭、石膏矿区,经多年开采,造成大面积采空和塌陷区,不仅给城市建设和防震减灾工作提出了更高要求,而且严重影响了农业乃至国民经济的发展。近年来,经国务院开发办批准,枣庄设立了国家级采矿塌陷地综合治理示范区。在国家和省政府有关部门的支持下,枣庄市以产业化、生态化、     

初论环境信息污染及预防

从SARS所引发的社会现象分析,首次从环境角度对信息污染进行探讨,提出了环境信息污染的含义及特征。并针对环境信息污染的潜在危害性,论述治理环境信息污染应以预防为主。建议政府和个人逐步通过建立“信息墙”,使信息更加有序、有条理,以此来预防和减少环境信息污染。     

天然沸石的加工技术及其在水处理中的应用

论述了天然沸石的吸附、离子交换和催化性能,介绍了沸石的超细粉碎、选矿提纯、化学增白、改性或改型、人工合成和再生等加工技术．从去除有机污染物、去除氨氮、降低氟含量、去除重金属离子、作污水滤料、消除放射性物质等方面回顾了沸石在水处理中的应用．并对应用前景和未来发展进行了展望。