Road dust resuspension in the vicinity of limestone quarries in Jordan

Many areas in Jordan suffer from elevated levels of coarse particulate matter (PM10). One potentially significant source of the observed PM is the resuspension of road dust in the vicinity of limestone quarries. To obtain data to assess the impact from this source, PM10 road dust resuspension factors near Abusiiah, a town to the north east of Amman surrounded by many quarries and brick factories, were measured. Measurements included PM10 mass, particle size distributions, wind speed, and wind direction. The results showed that PM10 concentrations could be as high as 600 microg/m3, and most of the airborne PM is in the coarse fraction. Loading trucks play a major role in resuspending road dust, with an observed PM10 emission rate of >6000 mg/km.     

Super effective Zn-Fe-doped TiO2 nanofibers as photocatalyst for ammonia borane hydrolysis

In this study, the photocatalytic activity of TiO₂ nanofibers toward ammonia borane hydrolysis has been strongly modified by doping the nanostructure by ZnO and Fe₂O₃ oxides. Due to the differences in the work function and band gap energy among the three semiconductors (TiO₂, ZnO and Fe₂O₃), illumination of TiO₂ leads to accumulate the electrons and holes on the conduction and valance bands of Fe₂O₃ and ZnO, respectively. Accordingly, the experimental results indicated that the surface of the obtained nanofibers is very active which results in an instant hydrolysis of ammonia borane molecules reaching the active zone surrounding the nanofibers. Moreover, negative activation energy was determined as increasing the temperature led to decrease the photocatalytic performance. Furthermore, kinetic studies indicated that the heterogeneous catalytic reaction describing the ammonia borane hydrolysis process is zero order which additionally supports the super activity of the introduced nanofibers. It was also observed that Fe₂O₃ content in the introduced nanofibers has distinct influence as the best performance was obtained at 1 wt%. The modified TiO₂ nanofibers were prepared by calcination of electrospun nanofibers composed of titanium isopropoxide, zinc acetate and iron acetate in air at 700 °C for 1 h. Overall, the present study opens a new avenue to overcome the fast electrons/holes recombination dilemma facing TiO₂-based nanostructures.     

Simulation of flow field and steel/slag interface in the mold region of a thin slab steel continuous caster with tetra-furcated nozzle

A three dimensional steady flow field model in the mold region of a thin slab steel continuous caster is presented using real geometrical dimension starting from the inlet port of the nozzle. The results indicate a special flow pattern in the caster while using a tetra-furcated nozzle. The fluid pattern in the mold region is shown to have two large downward and upward recirculation zones with a classic double-roll and two small vortices generated by the upward flow from the upper ports of the submerged entry nozzle. The flow pattern agrees well with the real observation obtained by full scale water model. This study investigates the interface wave behavior and its mechanism that leads to the breakup of the steel/slag interface, and thus the induction of impurities inside the final steel product. It is shown that a maximum wave height occurred because of the fluid contact from the upper ports. A critical casting speed was defined as the casting speed lead to wave instability, mostly associated with emulsification phenomena.     

Mechanical,Morphological and Dynamic Mechanical Analysis of Pineapple Leaf/Washingtonia Trunk Fibres Based Biophenolic Hybrid Composites

In this article, flexural, impact and dynamic mechanical properties of the Pineapple leaf fibres (PALF) and Washingtonia trunk fibres (GW) based bio-phenolic hybrid composites were examined. The pure and hybrid composites were fabricated using the hand lay-up technique with an overall fibre weight ratio of 50% in which GW and PALF were maintained in the fibre weight ratios of 50:50, 30:70, and 70:30 denoted as 1G1P, 3G7P, and 7G3P, respectively. Hybrid composites displayed better flexural strength, flexural modulus and impact strength than the GW composites and better viscoelastic properties than the PALF composites. Results revealed that 1G1P hybrid composites exhibited 25% and 12% improvements in flexural strength and modulus compared to the GW composites. 3P7K composites showed a twofold increase in impact strength than GW composites. The storage modulus of the pure and hybrid composites declined rapidly beyond the glass transition temperature. Furthermore, it was observed that the values of storage modulus for all the composites at 150 °C were similar regardless of the composite configuration. The Peak of loss modulus was found to increase in the following order: GW?>?7G3P?>?3G7P?>?1G1P?>?PALF. Furthermore, the temperature at the peak tan delta was improved, and a reduction in the tan delta peak was observed for hybrid composites compared to the pure composites. Finally, the PALF and GW hybrid combinations can be suitable for use in various applications such as textiles, machinery part production industries, medicine, automobiles, etc.

     

Distribution of Alkalinity, Ph, Salinity and Carbon Dioxide Components in the Coastal Waters of Alexandria

The ara studied is located between El-Dikheila Harbour in Elmex Bay and Mandara, at longitude 29° 47' and 30° East and latitude 31° 17' North. the aim of the work is to look at carbon dioxide components in this areA and the effect of waste water discharged on their concentrations. Surface and bottom water samples were collected from 12 stations during January, April, August and November, 1995. Total alkalinity, salinity, temperature and pH were measured. Carbonate alkalinity, total alkalinity, partial pressure and dissolved carbon dioxide, carbonate and bicarbonate ions were calculated, since the studied area includes two differetn sources of pollution. It wAs found conventient to refer El-Mex Bay as region “A” which contains stations from I to VI and the area located between Kayet Bey outfall and Mandara which contains stations from VII to XII as region “B”. When specific alkalinity is used As A tracer for El-Umum drain water it is observed that the drain water could reach Sidi Bishr area especially in August and November, while in January and April drain water did not reach this area.     

Binding of aluminum to human serum transferrin,human serum albumin and rat serum proteins

Abstract

Human serum transferrin (HSTF), human serum albumin (HSA) and rat serum were compared for their interaction with AlCl₃ , in a Tris‐HCl buffer solutions (pH 7.4). The AlCl₃ was tested in series of concentrations in the range of 50 μM up to 500 μM . HSTF, HSA and their 1:1 mixture and rat serum were incubated at 37°C with series of AlCl₃ concentrations. The protein profile of the incubated solutions were compared to control using SDS‐PAGE and FPLC tests. The results indicated that HSTF was more specifically responsive to AlCl₃showing a characteristic increase in its UV absorption, peak and area dimensions. Simultaneously, HSA was less affected, but it showed a significant shift with an increase in molecular weight accompanied with a change in its profile. The respective bands of transferrin and albumin in rat serum behaved similarly. The SDS‐PAGE and FPLC data coincided and confirmed the preferential affinity of HSTF to bind with Al³⁺ . These results support the suggestion of using HSTF for monitoring levels of Al³⁺ in human blood samples of exposed population. The importance of further developing such a biomarker is the increased demand for early detection of the hazardous levels of Al³⁺ in relation to its long term neurotoxic adverse effects.     

Optimal planning for the sustainable utilization of municipal solid waste

The increasing generation of municipal solid waste (MSW) is a major problem particularly for large urban areas with insufficient landfill capacities and inefficient waste management systems. Several options associated to the supply chain for implementing a MSW management system are available, however to determine the optimal solution several technical, economic, environmental and social aspects must be considered. Therefore, this paper proposes a mathematical programming model for the optimal planning of the supply chain associated to the MSW management system to maximize the economic benefit while accounting for technical and environmental issues. The optimization model simultaneously selects the processing technologies and their location, the distribution of wastes from cities as well as the distribution of products to markets. The problem was formulated as a multi-objective mixed-integer linear programing problem to maximize the profit of the supply chain and the amount of recycled wastes, where the results are showed through Pareto curves that tradeoff economic and environmental aspects. The proposed approach is applied to a case study for the west-central part of Mexico to consider the integration of MSW from several cities to yield useful products. The results show that an integrated utilization of MSW can provide economic, environmental and social benefits.     

The Relationship Between Iodine, Chlorinity, Ph, Reactive Phosphate, Nitrite and Organic Matter in the Coastal Water of Alexandria

Water samples were taken from 12 stations at El-Dikheila Harbour, El-Mex Bay, Western Harbour, Qayet Bey outfall, Eastern Harbour, El-Ibrahemiya, Gleem, Sidi Bishr and Mandara, during January, April, August and November 1995. the area lies between latitude 31˚ 8' and 31˚ 17' North and longitude 29˚ 47' and 30˚ East. the annual mean of chlorinity (11.69-20.5%₀), pH (7.9-8.3), reactive phosphate (0.31-2.24 μM), nitrite (0.18-1.98 μM), oxidizable organic matter (1.97-8.95 mgO₂ 1^-1), iodide (21.14-46.74 μg 1^-1) and iodate (4.61-2.04 μg 1^-1) were measured. Iodide content in water is three times higher than iodate. Iodide is positively correlated with chlorinity (r=0.65) and iodate (r=0.45), while it is negatively correlated with nitrite (r= -0.72), oxidizable organic matter (r= -0.55) and pH (r= -0.4).