Optimizing safety-constrained solvent selection for process systems with economic uncertainties

Solvents are very commonly used in industrial facilities for a multitude of reasons. Traditionally, solvent selection has been based on minimizing the process operating cost while satisfying a set of operational requirements. Regrettably, safety considerations have typically been overlooked during the design phase. In this paper, a systematic approach is introduced to integrate safety issues into solvent selection and provides a computationally effective method for establishing tradeoffs between the economic and safety objectives. In order to quantify the risk associated with the solvent, we focus on the potential spillage of the solvent and introduce a risk index that is a function of the amount of solvent used and stored, as well as the Permissible Exposure Limit (PEL) dictated by regulatory directives. An optimization formulation is developed and the associated mathematical program solved to select optimal solvents and blends while incorporating economic, technical, and safety considerations. Tradeoff (Pareto) curves are developed to represent the multi-objective optimization results and tradeoffs. Furthermore, economic-data uncertainty and variability over expected ranges are included in the optimization formulation to conduct an insightful sensitivity analysis. Finally, an illustrative case study is considered via increasing levels of complexity in order to evaluate the proposed optimization method which considers both operating cost and safety risk implications in the presence of economic uncertainties.     

Impact assessment of subsurface drainage on waterlogged and saline lands

Waterlogging and salinity due to seepage from canals have polluted land and environment in various parts of Pakistan. A sustainable environment requires urgent remedial measures for this problem. The research in this paper presents the impacts of the Fourth Drainage Project, Faisalabad on the twin problem of waterlogging and salinity. Monitoring of the project was made on regular basis. The key performance indicators for the project include the lowering of water table, improvement of water quality and soil salinity, increase in area under cultivation, cropping intensity, and socioeconomic status of the project population. Data regarding water levels and discharge from the drain pipes were collected to monitor the impact on waterlogging. Soil samples were tested to evaluate the impact of drainage on land. It has been found that the percentage of the contaminated land in the project area has considerably been decreased, while the cropping intensities have been increased.     

The ameliorative effect of kaempferol against CdCl2- mediated renal damage entails activation of Nrf2 and inhibition of NF-kB

Environmental Science and Pollution Research - This study evaluated the nephroprotective effect of kaempferol against cadmium chloride (CdCl2) -induced nephropathy in rats. It also investigated if...     

Swelling related to ettringite crystal formation in chromite ore processing residue

Several million tons of Chromite Ore Processing Residue (COPR) were deposited at two sites in New Jersey and Maryland, USA, and over time they exhibited extensive heaving phenomena. Ettringite, a needle-shaped mineral and an expansive mineral commonly recognized in the literature concerning cement- and soil, has been identified extensively in numerous COPR samples collected from these sites. It was therefore believed that ettringite formation and its crystal growth are strongly associated with COPR heaving. We investigated the correlation between ettringite and the heaving phenomena in COPR materials that contained no initial ettringite. Two identical COPR samples were exposed to a 4% w/w sulfate solution (25°C, 50°C) in a confined swell test apparatus. Both swell test samples were analyzed by means of X-ray powder diffraction. The peak intensities of newly formed ettringite were more pronounced in the sample tested at 50°C, and swell development was only observed in this sample. Scanning electron microscopy analyses revealed well-crystallized ettringite needles exceeding 40 μm in length for this sample, while ettringite crystals less than 15 μm in length formed in the sample tested at 25°C. Therefore, the results suggest that the quantity of ettringite and the extent of crystallization play a key role in the heave of COPR.     

Influence of preparation method on structural,optical, magnetic,and adsorption properties of nano-NiFe2O4

Nickel ferrite (NiFe₂O₄) nanoparticles are prepared through different routes (microwave, co-precipitation, and pyrolysis) and tested for water purification applications through adsorption removal of an acid red dye B as a model organic pollutant. The characterizations of the prepared samples were done using XRD, FT-IR, SEM, TEM, BET, UV-Vis absorbance, Raman spectrum, and vibrating sample magnetometer (VSM). All samples showed an inverse spinel crystal structure. The obtained results pointed out to the effect of the synthetic route on the morphology, particle size, optical, and magnetic properties of the prepared ferrites. Magnetic measurements showed super-paramagnetic behavior for all samples. The magnetic saturation (M_s) of the sample prepared by pyrolysis, was found to possess the highest saturation value, 34.8 emu/g. Adsorption experiments were performed under the change in several parameters, such as pH, adsorbent dosage, and initial dye concentration. A dye removal percentage of 99% was reached under the optimum state. The isothermal adsorption of the acid red dye was investigated using several models, in which the experimental data could be best described by the Freundlich model. Several kinetic and equilibrium models were inspected by linear regression analysis and showed best fitting for the adsorption data through pseudo-second-order model. The calculated thermodynamic parameters indicated that the adsorption of acid red dye onto all the ferrite samples is a spontaneous and endothermic physical adsorption process.

     

Performance of a small-scale solar-powered adsorption cooling system

In this study, an experimental investigation on the performance of a small-scale residential-size solar-driven adsorption (silica gel-water) cooling system that was constructed at Assiut University campus, Egypt is carried out. As Assiut area is considered as hot, arid climate, field tests for performance assessment of the system operation during the summer season are performed under different environmental operating conditions. The system consists of an evacuated tube with a reflective concentration parabolic surface solar-collector field with a total area of 36 m², a silica gel-water adsorption chiller of 8 kW nominal cooling capacity, and hot and cold water thermal storage tanks of 1.8 and 1.2 m³ in volume, respectively. The results of summer season field test show that under daily solar insolation varying from 21 to 27 MJ/m², the solar collectors employed in the system had high and almost constant thermal efficiency. The daily solar-collector efficiency during the period of system operation ranged from about 50% to 78%. The adsorption chiller performance shows that the chiller average daily coefficient of performance (COP) was 0.41 with the average cooling capacity of 4.4 kW when the cooling-water and chilled-water temperatures were about 31°C and 19°C, respectively. As the chiller cooling water is cooled by the cooling tower in the hot arid area, the cooling water is at a higher temperature than the design point of the chiller. Therefore, an experiment was carried out using the city water for cooling. The results show that an enhancement in the chiller COP by 40% and the chilling power by 17% has been achieved when the city water was 27.7°C.     

Preparation and Characterization of Biodegradable Blend Membranes of PBS/CA

Asymmetric membranes of cellulose acetate/poly (butylene succinate) were prepared using immersion precipitation technique. The blended membranes were characterized by contact angle, scanning electron microscopy, thermogravimetric analysis, degradation test in compost and dynamic test of raisin wastewater treatment. Results demonstrated that hydrophilicity of cellulose acetate was enhanced by addition of poly (butylene succinate) up to 50 %. Furthermore, polymeric composition affects cross sectional structure of the membranes by controlling formation of macrovoids. Addition of poly (butylene succinate) improved the membranes thermal stability and obviously their degradation in compost. The prepared membranes were able to reject the wastewater pollutants properly.     

Effects of permethrin exposure on antioxidant enzymes and protein status in Mediterranean clams Ruditapes decussatus

The effects of permethrin (PER) on a panel of antoxidant enzymes; superoxide dismutase (SOD), catalase (CAT) and glutathione S-transferase (GST) and indices of protein oxidation status (carbonylation and free thiols) were determined in digestive gland and gills of the clam Ruditapes decussatus. Animals were exposed to 100 ppb PER for 2 days. These enzyme activities increased significantly in digestive gland (p?<?0.05) after PER treatment and oxidative modification of proteins was detected in both gill and digestive gland extracts using redox proteomics. PER exposure significantly reduced the amount of protein free thiol groups in digestive gland rather than in gill, when compared to controls. Conversely, digestive gland showed significantly higher levels of carbonylated proteins than gill after PER exposure. Some proteins were successfully identified by mass spectrometry of tryptic peptides. Our data suggest that digestive gland of R. decussatus can be used as a model tissue for investigating environmental risk of PER contamination.     

Investigation of PM2.5 and carbon dioxide levels in urban homes

PM_2.5 (particulate matter with an aerodynamic diameter <2.5 μm) samples were collected in the indoor environments of 15 urban homes and their adjacent outdoor environments in Alexandria, Egypt, during the spring time. Indoor and outdoor carbon dioxide (CO₂) levels were also measured concurrently. The results showed that indoor and outdoor PM_2.5 concentrations in the 15 sites, with daily averages of 45.5 ± 11.1 and 47.3 ± 12.9 µg/m³, respectively, were significantly higher than the ambient 24-hr PM_2.5 standard of 35 µg/m³ recommended by the U.S. Environmental Protection Agency (EPA). The indoor PM_2.5 and CO₂ levels were correlated with the corresponding outdoor levels, demonstrating that outdoor convection and infiltration could lead to direct transportation indoors. Ventilation rates were also measured in the selected residences and ranged from 1.6 to 4.5 hr^?1 with median value of 3.3 hr^?1. The indoor/outdoor (I/O) ratios of the monitored homes varied from 0.73 to 1.65 with average value of 0.99 ± 0.26 for PM_2.5, whereas those for CO₂ ranged from 1.13 to 1.66 with average value of 1.41 ± 0.15. Indoor sources and personal activities, including smoking and cooking, were found to significantly influence indoor levels.

Implications: Few studies on indoor air quality were carried out in Egypt, and the scarce data resulted from such studies do not allow accurate assessment of the current situation to take necessary preventive actions. The current research investigates indoor levels of PM_2.5 and CO₂ in a number of homes located in the city of Alexandria as well as the potential contribution from both indoor and outdoor sources. The study draws attention of policymakers to the importance of the establishment of national indoor air quality standards to protect human health and control air pollution in different indoor environments.     

Effect of Habitat Complexity on Richness, Abundance and Distributional Pattern of Forest Birds

Structurally complex forests provide more diverse conditions in comparison to homogenous forests because of greater variety of microhabitats and trees. This study assesses the association of bird species richness, abundance, and distributional pattern with habitat complexity (HC) in Kheyrud Forest in the north of Iran. Birds were surveyed during spring 2009 by 100 point counts. In each point count six habitat features related to the index of HC were computed and scored from 0 to 3. Then the scores were summed and divided into two groups of low and high complexity, HC ≤ 6 and HC > 6, respectively. To compare bird richness and abundance in different HCs, a two sample t-test was used. Presence and absence of bird species at each plot as a dependent variable were compared with the vegetation characteristics as an independent variable by means of the Canonical Correspondence Analysis. The results revealed bird species richness and abundance were significantly higher in more complex habitats. Bird species can be divided into two groups, the first group including species which associated with late successional stages and the second group, species belonging to early successional stages. Numbers of birds belonging to the first group declined in less complex forests, whereas the numbers of birds belonging to the second group increased. At the stand scale, our results reveal that bird abundance and richness are strongly associated with the complexity of vegetation structure in the study area.