Reproductive toxicity of lead,cadmium, and phthalate exposure in men

Environmental toxicants viz lead or cadmium and phthalate esters (di(2-ethylhexyl) phthalate [DEHP], dibutyl phthalate [DBP], and diethyl phthalate [DEP]) widely found in different environmental strata are linked to deteriorating male reproductive health. The objective was to assess the relationships between the seminal lead, cadmium, and phthalate (DEHP, DBP, DEP) concentrations at environmental level and serum hormone levels and semen quality in non-occupationally exposed men and specify the effect of individual and combined exposure of toxicants on semen quality. A study of 60 male partners of couples attending the Andrology Laboratory of the Reproductive Biology Department, All India Institute of Medical Sciences (AIIMS), New Delhi, India for semen analysis to assess their inability to achieve a pregnancy was selected for the study. The results of univariate and stepwise multiple regression analysis in the unadjusted model showed a significant correlation between lead or cadmium and phthalates DEHP/DBP/DEP and sperm motility, sperm concentration, and DNA damage. After adjusting for potential confounders, an association with lead or DEHP was only observed. The present data shows that lead (Pb) or cadmium (Cd) or phthalates might independently contribute to decline in semen quality and induce DNA damage. Phthalates might influence reproductive hormone testosterone. These findings are significant in light of the fact that men are exposed to a volley of chemicals; however, due to the small sample size, our finding needs to be confirmed in a larger population.     

Environmental effects of soil contamination by shale fuel oils

Estonia is currently one of the leading producers of shale oils in the world. Increased production, transportation and use of shale oils entail risks of environmental contamination. This paper studies the behaviour of two shale fuel oils (SFOs)—‘VKG D’ and ‘VKG sweet’—in different soil matrices under natural climatic conditions. Dynamics of SFOs’ hydrocarbons (C10–C40), 16 PAHs, and a number of soil heterotrophic bacteria in oil-spiked soils was investigated during the long-term (1 year) outdoor experiment. In parallel, toxicity of aqueous leachates of oil-spiked soils to aquatic organisms (crustaceans Daphnia magna and Thamnocephalus platyurus and marine bacteria Vibrio fischeri) and terrestrial plants (Sinapis alba and Hordeum vulgare) was evaluated. Our data showed that in temperate climate conditions, the degradation of SFOs in the oil-contaminated soils was very slow: after 1 year of treatment, the decrease of total hydrocarbons’ content in the soil did not exceed 25 %. In spite of the comparable chemical composition of the two studied SFOs, the VKG sweet posed higher hazard to the environment than the heavier fraction (VKG D) due to its higher mobility in the soil as well as higher toxicity to aquatic and terrestrial species. Our study demonstrated that the correlation between chemical parameters (such as total hydrocarbons or total PAHs) widely used for the evaluation of the soil pollution levels and corresponding toxicity to aquatic and terrestrial organisms was weak.     

Biodegradability of Epoxidized Soybean Oil Based Thermosets in Compost Soil Environment

In this study, bio-thermoset from epoxidized soybean oil (ESO) was prepared in the presence of methylhexahydrophthalic anhydride curing agent and 2-ethyl-4-methylimidazole catalyst. The crosslink densities of the synthesized ESO are ranged from 0.109 × 10^?3 to 0.308 × 10^?3 mol/cm³. The ESO bio-thermosets were exposed to the soil-burial test for 8 months. Weight change and morphology of the degraded ESO specimens were assessed. It was found that the weight loss of ESO was governed by the materials compositions, crosslink density and the soil-burial exposure time. The 3 mm thickness ESO bio-thermosets with crosslink density of 0.109 × 10^?3 mol/cm³ had fully biodegraded after soil-burial for 6 months. In addition, 16S rDNA sequencing was carried out to identify the soil microorganisms. It was suggested that Comamonas sp., Bacillus sp., Streptomyces sp. and Acinetobacter sp. are the possible soil microbes that degrade the ESO bio-thermosets in the compost soil environment.     

Effect of pressure and temperature on the hydropyrolysis of cotton residue

With growing concerns of fossil fuel resources availability and the volatility of crude oil price, it is becoming imperative day by day to utilize the renewable sources of energy in a sustainable, environment friendly and energy efficient manner. India is the world’s second largest producer of cotton after China. India also has several agricultural and forest residues, and cotton residue is one of the most abundant agricultural residues after rice and wheat residues. The hydropyrolysis of cotton residues has been carried out at various pressures (1, 20 and 40 bar) and temperatures (300, 350, 400 and 450 °C). The effects of temperature and pressure have been studied to understand their yield patterns, and it has been observed that 20 bar pressure and 400 °C are the optimum conditions. The thermogravimetric analysis shows that cotton residue has two significant decomposition temperatures. The SEM, XRD patterns and FT-IR spectra clearly indicate the decomposition of the macromolecular structure of the cotton residue and formation of low molecular weight hydrocarbons suitable for various applications.     

Evaluation of different isotherm models,kinetic, thermodynamic,and copper biosorption efficiency of Lobaria pulmonaria (L.) Hoffm.

The biosorption characteristics of Cu(II) ions from aqueous solution using Lobaria pulmonaria (L.) Hoffm. biomass were investigated. The biosorption efficiency of Cu(II) onto biomass was significantly influenced by the operating parameters. The maximum biosorption efficiency of L. pulmonaria was 65.3% at 10 mg/L initial metal concentration for 5 g/L lichen biomass dosage. The biosorption of Cu(II) ions onto biomass fits the Langmuir isotherm model and the pseudo-second-order kinetic model well. The thermodynamic parameters indicate the feasibility and exothermic and spontaneous nature of the biosorption. The effective desorption achieved with HCl was 96%. Information on the nature of possible interactions between the functional groups of the L. pulmonaria biomass and Cu(II) ions was obtained via Fourier transform infrared (FTIR) spectroscopy. The results indicated that the carboxyl (–COOH) and hydroxyl (–OH) groups of the biomass were mainly involved in the biosorption of Cu(II) onto L. pulmonaria biomass. The L. pulmonaria is a promising biosorbent for Cu(II) ions because of its availability, low cost, and high metal biosorption and desorption capacities.

Implications: Lobaria pulmonaria is a promising biosorbent for Cu(II) ions because of its availability, low cost, and high metal biosorption and desorption capacities. To the best of our knowledge, this is the first paper on the biosorption Cu by L. pulmonaria.     

Effect of ozonization in degradation of trifluralin residues in aqueous and food matrices

Abstract

This study investigates the oxidation of trifluralin residues during ozonation in aqueous and food matrices (tomato). Domestic ozonation equipment with average production of 23.9?mg O₃ L^?1 h^?1 was used in the tests. Modern chromatographic systems (SPME-GC-IT/MS/MS and QuEChERS-GC-IT/MS/MS) were applied for extraction and detection of trifluralin residue in fortified samples of ultrapure water, tap water, superficial water and tomato fruit. The samples were submitted to the ozonation process during 0, 5, 10 and 20?min. Treatment at 5?min was able to degrade 71.5% of herbicide trifluralin in surface water. The removal (%) in ultrapure water reached 83.4% after 20?min of ozonation. The degradation of trifluralin in fortified tomato samples (0.025–0.1?mg kg^?1) were conducted with ozonation at 20?min, and it ranged from 84.4 to 92.7%. After treatment, levels of trifluralin in tomato remained within the established MRLs to EU, USEPA and ANVISA (Brazil). The data provided evidence that ozone is effective for removing trace trifluralin from water and foods.     

Clinical effects and cholinesterase activity changes in workers exposed to phorate (Thimet)

Abstract

Phorate (Thimet), an aliphatic derivative of phospnorus is a hignly toxic insecticide. In order to implement the safety measures, the clinical manifestations and cholinesterase (ChE) activity were evaluated before and after 2 weeks of exposure to this insecticide in 40 male tormulators.

The 2 week's exposure reveal signs and symptoms of toxicity in 60% of the formulators. Gastrointestinal symptoms and lowering of heart rate (bradycardia) were more prominent as compared to the neurological symptoms. A significant depression in plasma ChE activity was observed at the end of 1st week (55%) and 2nd week (71%) as compared to the respective pre‐exposure values. A recovery up to 79% of the pre‐exposure activity of this enzyme was noticed 10 days after cessation of the above exposure.     

Deposition of aerially sprayed mexacarbate on balsam fir canopy and the forest floor: Relevance to ULV applications

Abstract

Spray deposit patterns were measured on aluminum coils and live balsam fir needles at different canopy heights, following aerial application of mexacarbate (4‐dimethylamino‐3,5‐xylyl N‐methylcarbamate) over a conifer forest in New Brunswick. Droplet size spectra of the spray cloud were determined on cylindrical Kromekote® cards placed at the corresponding crown heights. Ground deposits were collected on cylindrical Kromekote cards, aluminum coils and natural balsam fir foliage placed In forest clearings and under different types of vegetation.

Canopy deposits decreased progressively from the top to the bottom level of the tree crown. This trend was observed on aluminum coils, live fir foliage, and Kromekote cards. Droplet size spectra were similar at all sampling heights of the tree crown, and were comparable to those obtained on the ground cards placed in the forest clearings. Deposits of mexacarbate obtained on ground samplers on the open forest floor were markedly lower than those found at the top canopy but were similar to those at the mid or bottom canopy level. Droplet size spectra and mexacarbate deposits obtained on samplers placed under different types of forest vegetation indicated a selective filtration of the large droplets present in the spray cloud by plant canopies.     

Persistence and biodegradation of carbaryl in soils

Abstract

The persistence of the methylcarbamate pesticide carbaryl was studied in four soils under flooded conditions. A substantial portion of the pesticide was recovered from all soils even after 15 days of its application, with the recovery ranging from 37% in an alluvial soil to 73% in an acid sulfate soil. The degradation of carbaryl was more rapid under flooded conditions than under nonflooded conditions. A bacterium, Pseudomonas cepacia, isolated from a flooded soil amended with a related methylcarbamate pesticide carbofuran, degraded carbaryl in a mineral medium supplemented with yeast extract.     

Measurements of surface contamination of spray equipment with pesticides after various methods of application

Abstract

A traditional method to determine operator dermal exposure is to quantify the amount of pesticide coming into contact with specific body regions and then to integrate the deposition density values with the total body surface. It is known that extremely high deposition values may occur in the hand region; however, the source of contamination is generally assumed to be direct splash or contact with the pesticide container. One of the parameters affecting operator/pilot exposure could be the transfer of pesticide residue, particularly in the case of pesticides with a longer half‐life, from contaminated surfaces of spray equipment by direct contact over extended periods. If the rate of skin absorption of pesticide is readily known, the expected values of daily dose for an operator or pilot may significantly rise due to the extended contact period. This study produced field data on the surface contamination of spray equipment used for ground and aerial applications. If field data on precise work practice (time‐motion) observations are incorporated, it may be possible to estimate the potential exposure of operator/pilot due to hand contact with contaminated surfaces.