Two-site kinetic modeling of bacteriophages transport through columns of saturated dune sand

Breakthrough curves, on a semi-log scale, from tests in porous media with block-input of viruses, bacteria, protozoa and colloidal particles often exhibit a typical skewness: a rather slowly rising limb and a smooth transition of a declining limb to a very long tail. One-site kinetic models fail to fit the rising and declining limbs together with the tail satisfactorily. Inclusion of an equilibrium adsorption site does not seem to improve simulation results. This was encountered in the simulation of breakthrough curves from a recent field study on the removal of bacteriophages MS2 and PRD1 by passage through dune sand. In the present study, results of laboratory experiments for the study of this issue are presented. Breakthrough curves of salt and bacteriophages MS2, PRDI, and phiX174 in 1 D column experiments have been measured. One- and two-site kinetic models have been applied to fit and predict breakthrough curves from column experiments. The two-site model fitted all breakthrough curves very satisfactorily, accounting for the skewness of the rising limb as well as for the smooth transition of the declining limb to the tail of the breakthrough curve. The one-site model does not follow the curvature of the breakthrough tail, leading to an overestimation of the inactivation rate coefficient for attached viruses. Interaction with kinetic site 1 is characterized by relatively fast attachment and slow detachment, whereas attachment to and detachment from kinetic site 2 is fast. Inactivation of viruses and interaction with kinetic site 2 provide only a minor contribution to removal. Virus removal is mainly determined by the attachment to site 1. Bacteriophage phiX174 attached more than MS2 and PRD1, which can be explained by the greater electrostatic repulsion that MS2 and PRD1 experience compared to the less negatively charged phiX174.     

Using Design-Expert to Optimize the Properties of a Polyethersulfone Ultrafiltration Membrane Through the Incorporation of NH2-MIL-53(Fe) and PVP for Maximum Cr(VI) Removal and Flux

Journal of Polymers and the Environment - In this study, an NH2-MIL-53(Fe) functionalized membrane was fabricated for Cr(VI) removal from contaminated groundwater. Design-Expert was employed to...     

Tropospheric Ozone in Tehran,Iran, during the last 20 years

Environmental Geochemistry and Health - Air pollution and its effects on human health and the environment are one of the main concerns in urban areas. This study focuses on the distribution and...     

Temporal variation in leachate composition of a newly constructed landfill site in Lahore in context to environmental pollution and risks

Environmental Science and Pollution Research - This study investigated the seasonal and temporal variations in the extent and source of physiochemical and toxic trace elements in the Lakhodair...     

The detection of SARS-CoV-2 RNA in indoor air of dental clinics during the COVID-19 pandemic

Environmental Science and Pollution Research - In the indoor environment of dental clinics, dental personnel and patients are exposed to a risk of infection because of the transmission of...     

A multi-objective closed-loop supply chain network design problem under parameter uncertainty: comparison of exact methods

Environment, Development and Sustainability - Forward and reverse supply chains are one of the most important issues in supply chain management. These kinds of supply chain networks include a...     

High-risk behaviors while driving: A population-based study from Iran

Objective: Traffic injuries are becoming one of the most important challenges of public health systems. Because these injuries are mostly preventable, the aim of this study is to evaluate the four main high-risk behaviors while driving.

Methods: This cross-sectional study was conducted on a random sample from the population of Mashhad, Iran, in 2014. A checklist and a previously validated questionnaire for the transtheoretical stages of change model (TTM) were used for data collection. Statistical analyses were performed using SPSS 11.5 software with P <.05 statistically significant.

Results: Totally 431 individuals were included with a mean age of 30 ± 11.3 years. Forty-three percent (183) were male. The TTM model revealed that participants were mostly in pre-actional phases regarding not using a cell phone while driving (80%), fastening the driver's seat belt (66%), front seat belt (68%), and rear seat belt (85%) The penalty was a protective factor only for using cellphone (odd ratio [OR] = 0.82, 95% confidence interval [CI], 0.68–0.98). Lower education (OR = 0.12, 95% CI, 0.01–0.94) and male gender (OR = 0.35, 95% CI, 0.14–0.83) were indicative of lower rates of fastening the front and rear seat belts.

Conclusion: The stages of change model among study participants is a proper reflection of the effectiveness of the current policies. More serious actions regarding these high-risk behaviors should be considered in legislation.     

Options for sustainable development planning based on “GHGs emissions reduction allocation (GERA)” from a national perspective

Climate change phenomenon can be seen as a simple but daunting problem. The lack of equity in emission reduction burden sharing regime, will cause a need for a greater sacrifice for poor or less developed countries. Thus, the evaluation of different aspects of equity at a national scale and presenting a top–down model of equity for allocation of GHGs emission (such as GERA) in line with sustainable development is the main objective of this study. In this study, the five equity principles proposed in the literature namely (1) population distribution, (2) GHGs emissions, (3) GDP, (4) trend of economic growth and (5) per capita of carbon productivity as appropriate criteria of equity estimation. Due to the different decision makers' preferences, different weights are allocated to indicators and analyzed. Iran has been considered as a case study, and these criteria were applied at national level to propose an allowance allocation scheme. The result of applying GERA for Iran, at provincial level and under the five equity criteria, determines which provinces have to shoulder higher reduction burdens, and makes a room for less developed provinces for growth. Based on these results, this model demonstrated to be more sensitive to criteria selection rather than to the weight factors. In addition, shifting to low carbon technologies or renewables, careful evaluation of current emission–income pattern, improving of energy intensity and finally, adjustment of secondary industries (manufacturing) based on ecological and natural resources of each region are suggested as the most efficient approaches toward sustainability and green development for the case study.     

Magnetic Cr(VI) Ion Imprinted Polymer for the Fast Selective Adsorption of Cr(VI) from Aqueous Solution

In this study, a novel magnetic Cr(VI) ion imprinted polymer (Cr(VI)-MIIP) was successfully synthesized and used as a selective sorbent for the adsorption of Cr(VI) ions from aqueous solution. It can be synthesized through the combination of an imprinting polymer and magnetic nanoparticles. The high selectivity achieved using MIIP is due to the specific recognition cavities for Cr(VI) ions created in Cr(VI)-MIIP. Also, the magnetic properties that could be obtained using magnetic nanoparticles, helps to separate adsorbent with an external magnetic field without either additional centrifugation or filtration procedures. The magnetic Fe₃O₄ nanoparticles (MNPs) were synthesized using an improved co-precipitation method and modified with tetraethylorthosilicate (TEOS) before imprinting. The magnetic Cr(VI) ion imprinted polymer was prepared through precipitation copolymerization of 4-vinylpyridine as the complexing monomer, 2-hydroxyethyl methacrylate as a co-monomer, the Cr⁶⁺ anion as a template, and ethylene glycol dimethacrylate (EGDMA) as a cross-linker in the presence of modified magnetite nanoparticles. This novel synthesized sorbent was characterized using different techniques. Batch adsorption experiments were performed to evaluate the adsorption conditions, selectivity, and reusability. The results showed that the maximum adsorption capacity was 39.3 mg g^?1, which was observed at pH 3 and at 25?°C. The equilibrium time was 20 min, and the amount of adsorbent which gave the maximum adsorption capacity was 1.7 g L^?1. Isotherm studies showed that the adsorption equilibrium data were fitted well with the Langmuir adsorption isotherm model and the theoretical maximum adsorption capacity was 44.86 mg g^?1. The selectivity studies indicated that the synthesized sorbent had a high single selectivity sorption for the Cr(VI) ions in the presence of competing ions. Thermodynamic studies revealed that the adsorption process was exothermic (\(\Delta H\)?<?0) and spontaneous (\(\Delta G\)?<?0). In addition, the spent MIIP can be regenerated up to five cycles without a significant decrease in adsorption capacity.