When fragmented coral spawn? Effect of size and timing on survivorship and fecundity of fragmentation in <Emphasis Type="Italic">Acropora formosa</Emphasis>

In order to determine competency of sexual reproduction and survival rate after fragmentation, the branching coral Acropora formosa was fragmented and fragments in three different sizes (ca. 5, 10 and 20 cm long) and three different stages of gametogenesis were transplanted on coral pavement. Their oocyte development and fecundity, as well as spawning were monitored for a 3-year period. The oocyte development was affected by both fragment size and by the developmental stage of oocytes when fragmented. In small fragments, the oocytes were resorbed while in large fragments they continued development. Oocytes in the early vitellogenic stage at the time of fragmentation were resorbed, whereas those in the late stage continued developing. Smaller fragments showed a lower survival rate and histological observations of their gonads revealed resorption of oocytes, suggesting that there was a trade-off of energy between reproduction and survival. Transplanted fragments often spawned one month earlier than the donor colonies in the first year, but spawning occurred in the same month as the donors or did not occur at all in the second year and none spawned in the third year. The risk of colony death may cause the fragments to re-allocate energy for sexual reproduction.     

Impurities in industrial grade 4,4'-isopropylidene diphenol (bisphenol A): possible implications for estrogenic activity

Fifteen trace impurities, including a novel cyclohexene derivative, have been identified and quantified in samples of an industrial grade of the oestrogen-active compound 4,4'-isopropylidene diphenol (bisphenol A). All of these compounds, like bisphenol A itself, possess phenolic hydroxyl groups para to other substituents and all thus might also have oestrogenic properties. Published studies on the endocrine disrupting properties of bisphenol A have not considered potentially active impurities but full assessment of the oestrogenicity of bisphenol A, as it is used commercially, will become possible when adequate supplies of these compounds are available through synthesis.     

The effect of feeding behavior of the gastropods<Emphasis Type="Italic"> Batillaria zonalis</Emphasis> and<Emphasis Type="Italic"> Cerithideopsilla cingulata</Emphasis> on their ambient environment

Feeding behaviors of the gastropods Batillaria zonalis, a suspension and deposit feeder, and Cerithideopsilla cingulata, an obligate deposit feeder, were studied to examine their effect on dynamics of suspended materials, total nitrogen (TN) and total organic carbon (TOC) in sediments. Suspension feeding in B. zonalis was observed in detail visually, as it had been previously unreported. An experimental system where B. zonalis and C. cingulata were cultured for 10 weeks, using previously frozen microalgae Nannochloropsis oculata as food, was then constructed. During feeding observations, the suspension-feeding B. zonalis formed a mucus food cord to entangle particulate materials, which were subsequently ingested. The feeding mode of B. zonalis is hence categorized as ctenidial filter feeding. For the culture experiments, decreases in suspended materials were seen only in the B. zonalis cultures, while the control (no gastropods) and C. cingulata cultures remained nearly unchanged. Sediment TN and TOC showed no significant differences between B. zonalis (with mean TN at 0.0345% and mean TOC at 0.261%) and control cultures (with TN at 0.0389% and TOC at 0.331%), but the sediments in C. cingulata cultures had lower levels (with TN at 0.0204% and TOC at 0.156%). The C/N ratios were similar for both B. zonalis (7.55) and C. cingulata (7.68) cultures, and both were lower than the control cultures (8.55). The filtration rate for B. zonalis was lower than that previously observed in bivalves inhabiting the same intertidal flat (e.g. Cyclina sinensis, Grafrarium tumidum and Barbatia virescens). However, Batillaria zonalis occurs at higher abundances than these bivalves. Therefore, it is expected that this species has a large affect upon the transport of suspended materials to the sediments. The addition of TN and TOC to sediments in B. zonalis cultures was probably caused by biodeposition, but deposit feeding by B. zonalis may have restrained the accumulation of those components. The impact of deposit feeding in Cerithideopsilla cingulata cultures was most probably stronger than sedimentation and biodeposition, because of the lower sediment TN and TOC. Bioturbation by both B. zonalis and C. cingulata yields the same effect on sediment quality, as indicated by the low C/N in the culture sediment of both treatments, despite difference in feeding modes. This paper demonstrates, for the first time, the importance of gastropods in bioturbation and removal of suspended materials in subtropical tidal flat habitats.Communicated by T. Ikeda, Hakodate     

Endogenous formation of hydrogen cyanide during distillation for the determination of total cyanide

This paper describes how organic compounds and nitrogen compounds induce the formation of hydrogen cyanide during the distillation process. Hydrogen cyanide formation was confirmed by X‐ray diffraction. The formation scheme for hydrogen cyanide from organic compounds is proposed.     

Dose-response relationships in mutagenicity assays including an appropriate positive control group: a multiple testing approach

The objective of mutagenicity assays in regulatory toxicology is the decision on non-mutagenicity or mutagenicity. An inherent problem of statistical tests is the possibility of false decisions, i.e., a mutagenic substance will be falsely labeled as non-mutagenic or a non-mutagenic substance will be falsely labeled as mutagenic. These probabilities of false negative (consumer's risk=type II error) and/or false positive decision (producer's risk=type I error) can be limited by using suitable testing procedures as well as a design including an appropriate positive control. Using the proof of hazard concept the well-known many-to-one procedures with total order restriction for increasing effect differences are used, while using the proof of safety concept procedures on equivalence with total order restriction are discussed. Both approaches are demonstrated on a real data example.     

Removal of H2S using molten carbonate at high temperature

Gasification is considered to be an effective process for energy conversion from various sources such as coal, biomass, and waste. Cleanup of the hot syngas produced by such a process may improve the thermal efficiency of the overall gasification system. Therefore, the cleanup of hot syngas from biomass gasification using molten carbonate is investigated in bench-scale tests. Molten carbonate acts as an absorbent during desulfurization and dechlorination and as a thermal catalyst for tar cracking. In this study, the performance of molten carbonate for removing H₂S was evaluated. The temperature of the molten carbonate was set within the range from 800 to 1000 °C. It is found that the removal of H₂S is significantly affected by the concentration of CO₂ in the syngas. When only a small percentage of CO₂ is present, desulfurization using molten carbonate is inadequate. However, when carbon elements, such as char and tar, are continuously supplied, H₂S removal can be maintained at a high level.To confirm the performance of the molten carbonate gas-cleaning system, purified biogas was used as a fuel in power generation tests with a molten carbonate fuel cell (MCFC). The fuel cell is a high-performance sensor for detecting gaseous impurities. When purified gas from a gas-cleaning reactor was continuously supplied to the fuel cell, the cell voltage remained stable. Thus, the molten carbonate gas-cleaning reactor was found to afford good gas-cleaning performance.     

Congener profiles of PCDDs, PCDFs, and dioxin-like PCBs in the breast milk samples in Tokyo, Japan

Exposure to dioxins has raised much public concern recently. We determined the congeners' distribution of polychlorinated-dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and dioxin-like polychlorinated biphenyls (dl-PCBs) in the breast milk samples collected in Tokyo, Japan. Breast milk was taken from 240 mothers, 30 days after delivery in 1999 and 2000 in Tokyo, Japan. The actual concentration and TEQ concentration of PCDDs (14 congeners), PCDFs (15 congeners), and dl-PCBs (12 congeners), and each congener's contribution to the total TEQ level were calculated. Among all the samples, PCDDs accounted for 34.8%, PCDFs accounted for 23.5%, dl-PCBs accounted for 41.7%, which was also similar in the breast milk from the primiparae and secundiparae. The main contributors to the total TEQ with increasing percentages were 2,3,4,7,8-PeCDF, 1,2,3,7,8-PeCDD and 3,3',4,4',5-PCB (#126), and they accounted for more than 65% of the total TEQ. Detailed congener analysis in breast milk samples is effective to understand dioxin sources.     

Depolymerization of Waste PET with Phosphoric Acid–Modified Silica Gel Under Microwave Irradiation

Chemical recycling of waste poly(ethylene terephthalate) (PET) using phosphoric acid–modified silica gel as a solid catalyst is reported. Advantageously, microwave irradiation was used to progress the depolymerization of PET. In this study, depolymerization of PET with a small amount of water is suggested as a suitable method. The depolymerized product, terephthalic acid was obtained and assigned by ¹H NMR and FT-IR spectroscopy. Finally, over 90 % conversion to terephthalic acid was achieved when waste plastic bottles were treated with the method. This results confirm the importance of the microwave power technique as a promising recycling method for plastic bottles made from PET, resulting in monomer recovery in addition to substantial energy saving.     

Determination of adrenal steroids by microfluidic chip using micellar electrokinetic chromatography

This paper describes a sensitive and convenient method to separate progesterone, 17alpha-hydroxy progesterone, cortexolone, hydrocortisone and cortisone, all of which are steroids and have similar structures, using microfluidic chip-based technology with UV detection at 252 nm. We successfully obtained high-speed separation of the five steroids within 70 s in optimized microfluidic controls and micellar electrokinetic chromatography (MEKC) separation conditions. Fairly good linearity with correlation coefficient of over 0.98 from 10 or 20 to 100 mg/l steroid chemicals was obtained. The limits of detection obtained at a signal to noise ratio of 3 were from 3.89 to 7.80 mg/l. The values of the relative standard deviation (RSD) were 0.98-1.34% for repetitive injection (n = 12) and the intraday and interday RSDs were below 6%. The highly stable response reflected the feasibility of this method.