Individual variation in pheromone emission and termination patterns in female Anomala cuprea

Summary. Individual variations in pheromone emission patterns were examined in a scarab beetle, Anomala cuprea Hope (Coleoptera: Scarabaeidae), by headspace collection of airborne volatiles from individual females. The amount of pheromone obtained varied among virgin females, and about 16% of these females (“silent” females) did not emit detectable amount of pheromone throughout the experimental period. There was no clear temporal pattern of peak pheromone emission for 19 days after the onset. More than half of the laboratory mated females completely stopped releasing pheromone after the first mating, while the rest of them continued releasing pheromone, frequently followed by additional mating. Received 26 March 2001; accepted 28 January 2002.     

Decolorization of oxygen-delignified bleaching effluent and biobleaching of oxygen-delignified kraft pulp by non-white-rot fungus Geotrichum candidum Dec 1

Decolorization of oxygen-delignified bleaching effluent (abbreviated as OBE) and biobleaching of oxygen-delignified kraft pulp (OKP) were conducted using a non-white rot fungus Geotrichum candidum Dec 1 (abbreviated as Dec 1) which has ability to decolorize various synthetic dyes and molasses. Dec 1 decolorized up to 77% of OBE for 6 days. In addition, Dec 1 increased the brightness of OKP from 47.8% to 51.2% and decreased the kappa value of OKP from 12.4 to 10.4 points during a 6-day incubation period at a 25% of pulpconcentration. At 2% pulp-concentration, the brightness of OKP increased by 13% and the kappa value of OKP decreased by 4 points only for a 3-day incubation period. When the decolorized OBE was used for bleaching of OKP, the brightness of OKP increased to 62.7% under the shaking culture to a 2% pulp-concentration using culture fluid of decolorized OBE. It was revealed that Dec 1 is a potential to apply for decolorization of wastewater and biobleaching of pulp in paper-mills.     

Creating an academic landscape of sustainability science: an analysis of the citation network

Sustainability is an important concept for society, economics, and the environment, with thousands of research papers published on the subject annually. As sustainability science becomes a distinctive research field, it is important to define sustainability clearly and grasp the entire structure, current status, and future directions of sustainability science. This paper provides an academic landscape of sustainability science by analyzing the citation network of papers published in academic journals. A topological clustering method is used to detect the sub-domains of sustainability science. Results show the existence of 15 main research clusters: Agriculture, Fisheries, Ecological Economics, Forestry (agroforestry), Forestry (tropical rain forest), Business, Tourism, Water, Forestry (biodiversity), Urban Planning, Rural Sociology, Energy, Health, Soil, and Wildlife. Agriculture, Fisheries, Ecological Economics, and Forestry (agroforestry) clusters are predominant among these. The Energy cluster is currently developing, as indicated by the age of papers in the cluster, although it has a relatively small number of papers. These results are compared with those obtained by natural language processing. Education, Biotechnology, Medical, Livestock, Climate Change, Welfare, and Livelihood clusters are uniquely extracted by natural language processing, because they are common topics across clusters in the citation network.     

Neonatal outcomes of congenital diaphragmatic hernia in full term versus early term deliveries: A systematic review and meta-analysis

This systematic review and meta-analysis aimed to review the optimal timing of delivery at term for neonates with prenatally diagnosed congenital diaphragmatic hernia (CDH). We reviewed the literature up to December 19, 2022 using MEDLINE and the Cochrane Library databases. The inclusion criteria were original articles, comparative studies of CDH neonates delivered at an early term (37–38 weeks of gestation) and at full term (39 weeks of gestation or later), and comparative studies investigating outcomes of CDH neonates. Six studies met the inclusion criteria, including 985 neonates delivered at an early term and 629 delivered at full term. The cumulative rate of survival to discharge showed no significant difference between CDH neonates delivered at an early term (395/515; 76.7%) or at full term (345/467; 73.9%) (risk ratio [RR] 1.01; 95% confidence interval [CI], 0.89–1.16; p = 0.85). Furthermore, the number of neonates requiring oxygen therapy at discharge was not significantly different between CDH neonates delivered at an early term (32/370; 8.6%) and at full term (14/154; 9.1%) (RR, 0.99; 95% CI, 0.36–2.70; p = 0.99). Therefore, the optimal timing of delivery at term for neonates with CDH remains unclear.     

Ocean fertilization for geoengineering: A review of effectiveness,environmental impacts and emerging governance

Dangerous climate change is best avoided by drastically and rapidly reducing greenhouse gas emissions. Nevertheless, geoengineering options are receiving attention on the basis that additional approaches may also be necessary. Here we review the state of knowledge on large-scale ocean fertilization by adding iron or other nutrients, either from external sources or via enhanced ocean mixing. On the basis of small-scale field experiments carried out to date and associated modelling, the maximum benefits of ocean fertilization as a negative emissions technique are likely to be modest in relation to anthropogenic climate forcing. Furthermore, it would be extremely challenging to quantify with acceptable accuracy the carbon removed from circulation on a long term basis, and to adequately monitor unintended impacts over large space and time-scales. These and other technical issues are particularly problematic for the region with greatest theoretical potential for the application of ocean fertilization, the Southern Ocean. Arrangements for the international governance of further field-based research on ocean fertilization are currently being developed, primarily under the London Convention/London Protocol.     

Mercury emission from sewage sludge incineration in Japan

Sewage sludge contains trace amounts of mercury, and sewage sludge incineration is a major source of mercury emissions. However, relatively few studies have reported on mercury emissions from sewage sludge incineration. Consequently, data on emissions from sewage sludge incinerators must be updated to estimate current emissions of mercury. In this study, we examined mercury emissions and speciation using continuous mercury analyzers in two incinerators. The mercury concentrations in stack gas from facilities A and B were 36.6 and 21.1???g/Nm³, respectively. As a result, the emission rate was calculated to be 0.282?C0.750?g/ton-dry sludge. Considering the total amount of sewage sludge incinerated in Japan, the mercury emissions from sewage sludge incinerators were estimated to be 0.49?C1.31?tons/year.     

Effects of Nitrogen Supply on the Sensitivity to O3 of Growth and Photosynthesis of Japanese Beech (Fagus crenata) Seedlings

To obtain basic information for evaluating critical levels of O₃ under different nitrogen loads for protecting Japanese beech forests, two-year-old seedlings of Fagus crenata Blume were grown in potted andisol supplied with N as NH₄NO₃ solution at 0, 20 or 50 kg ha⁻¹ year⁻¹ and exposed to charcoal-filtered air or O₃ at 1.0, 1.5 and 2.0 times the ambient concentration from 16 April to 22 September 2004. The O₃ induced significant reductions in the whole-plant dry mass, net photosynthetic rate at 380 μmol mol⁻¹ CO₂ (A ₃₈₀), carboxylation efficiency (CE) and concentrations of ribulose-1,5-bisphosphate carboxylase/oxygenase (Rubisco) and total soluble protein (TSP) in the leaves. The concentrations of Rubisco and TSP were negatively correlated with the concentration of leaf acidic amino acid, suggesting that O₃ enhanced the degradation of protein such as Rubisco. The N supply to the soil did not significantly change the whole-plant dry mass and A ₃₈₀, whereas it significantly increased the CE and concentrations of Rubisco and total amino acid. No significant interactive effects of O₃ and N supply to the soil were detected on the growth, photosynthetic parameters and concentrations of protein and amino acid in the leaves. In conclusion, N supply to the soil at ≤50 kg ha⁻¹ year⁻¹ does not significantly change the sensitivity to O₃ of growth and net photosynthesis of Fagus crenata seedlings.     

PCDDs/DFs emissions from crematories in Japan

Concentrations of PCDDs and PCDFs in emission gases from 10 crematories were measured. The relationship between PCDDs/DFs and several factors such as structure, equipment and operational state of the crematory is discussed. Furthermore, emission of PCDDs/DFs from all crematories in Japan is estimated. The following results are obtained: (1) total concentration of PCDDs/DFs was 2.2-290 ng/N m3, whose TEQ concentration was 0.0099-6.5 ng TEQ/N m3; (2) total concentration of PCDFs was higher than that of PCDDs; (3) T4CDFs was the highest in the homologue pattern and 2,3,7,8-T4CDF was the highest in the isomer pattern; (4) emission of PCDDs/DFs was the largest in the first 20 min of cremation; (5) concentration of PCDDs/DFs was related to the existence of a secondary combustion chamber and a dust collector, and the ratio of the numbers of main and secondary combustion chambers; (6) total emission of PCDDs/DFs from crematories in Japan was estimated to be 8.9 g TEQ/yr.     

Feasibility Study of Airbag Concept Applicable to Motorcycles Without Sufficient Reaction Structure

Objectives: An airbag system for motorcycle applications was developed and marketed in 2006 followed by many research projects on the system. In the airbag system, the bag should be supported during the kinetic energy–absorbing period of a rider in a collision. The previously developed system employed a configuration in which motorcycle structures support the airbag, such as a gauge unit and/or a steering structure. The supporting structure functions to receive the reaction force to hold the airbag during a crash to properly absorb the rider's kinetic energy. However, the previous system requires a larger area for this reaction structure and is applicable only to the motorcycles that can provide that area. To overcome this limitation, we propose an airbag system employing another concept. In this concept, the airbag does not use its vehicle structures as a reaction structure but uses the structures of an opposing vehicle, such as doors and/or pillars of an opposing vehicle. In this project, we aim to verify the effectiveness of the proposed system when installed in a motorcycle that cannot provide a larger area for the reaction structure.

Methods: In the system with this concept, it is assumed that the occupant protection performance is largely affected depending on impact configurations. Accordingly, full-scale motorcycle-to-car crash tests using 125 cm³ scooter-type models with and without the proposed system were conducted in various impact configurations. The 7 impact configurations specified in ISO 13232 were selected as the test configurations. Injury variables and injury indices of head, neck, chest, and abdomen were evaluated with the motorcyclist dummy.

Results: Injury variables and indices obtained from the crash tests with the airbag were compared to those of the baseline tests. In 2 impact configurations, the airbags were supported by the side structures of the opposing vehicle and performed to reduce the injury variable of head and/or chest compared to that of the baseline test.

Conclusion: Through the crash tests, beneficial protection effects of the airbag system were confirmed in particular impact configurations. No significant risk for the occupant due to the airbag was observed in the conducted crash tests. It was concluded that the proposed airbag system has feasibility to reduce rider injury in a collision of a motorcycle without sufficient reaction structure.     

Validation of diffusive mini-samplers for aldehyde and VOC and its feasibility for measuring the exposure levels of elementary school children

Exposure to various chemicals can cause adverse effects to health, such as asthma and allergies, especially in children. Data on personal exposure levels in children are scarce, thus small lightweight diffusive mini-samplers for aldehydes and volatile organic compounds (VOCs) were designed to measure the exposure level of children to these chemicals. The aim of the study was to validate and examine the applicability of these mini-samplers for measuring daily chemical exposure. The diffusive mini-samplers are 20 mm in length, 11 mm in diameter, and 1.67 g in weight. The devices are cylindrically shaped with polytetrafluoroethylene membrane filters placed at each end. To measure aldehydes and acetone, 20 mg of 2,4-dinitrophenylhydrazine was used as an absorbent. To measure VOCs, a carbon molecular sieve was used. The sampling rate for each chemical was determined by parallel sampling with active samplers in a closed exposure bag. The blank levels of the chemicals and the storage stability of the device were tested. The mini-samplers were compared to commercially available diffusive samplers. To examine the applicability of the samplers, 65 elementary school children carried them for 24 h. The sampling rates for formaldehyde, acetaldehyde, and acetone were 20.9, 22.9, and 19.7 mL min(-1), respectively. The limits of quantification (LOQ) for the 24-hour sampling by high-performance liquid chromatography/ultraviolet (HPLC/UV) analysis were 8.3, 7.6, and 8.8 μg m(-3) for formaldehyde, acetaldehyde, and acetone, respectively. The sampling rates for the 11 VOCs were determined and ranged from 3.3 mL min(-1) for styrene and 2-ethyl-1-hexanol to 11.7 mL min(-1) for benzene. The LOQ for the 24-hour sampling by gas chromatography-mass spectrometry (GC-MS) analysis ranged from 5.9-105.2 μg m(-3), 1.1-24.7 parts per billion. The storage stability after 5 days ranged from 94.8 to 118.2%. Formaldehyde, acetone, benzene, and toluene were detected above the LOQ in more than 90% of the children, and the median concentrations were 21.7, 20.9, 10.1, and 21.5 μg m(-3), respectively. This study shows that the diffusive samplers developed were suitable for children to carry and were capable of measuring the children's daily chemical exposure.