Comparative analysis for the production of fatty acid alkyl esterase using whole cell biocatalyst and purified enzyme from Rhizopus oryzae on waste cooking oil (sunflower oil)

The petroleum fuel is nearing the line of extinction. Recent research and technology have provided promising outcomes to rely on biodiesel as the alternative and conventional source of fuel. The use of renewable source - vegetable oil constitutes the main stream of research. In this preliminary study, Waste Cooking Oil (WCO) was used as the substrate for biodiesel production. Lipase enzyme producing fungi Rhizopus oryzae 262 and commercially available pure lipase enzyme were used for comparative study in the production of Fatty Acid Alkyl Esters (FAAE). The whole cell (RO 262) and pure lipase enzyme (PE) were immobilized using calcium alginate beads. Calcium alginate was prepared by optimizing with different molar ratios of calcium chloride and different per cent sodium alginate. Entrapment immobilization was done for whole cell biocatalyst (WCB). PE was also immobilized by entrapment for the transesterification reaction. Seven different solvents - methanol, ethanol, n-propanol, n-butanol, iso-propanol, iso-butanol and iso-amyl alcohol were used as the acyl acceptors. The reaction parameters like temperature (30°C), molar ratio (1:3 - oil:solvent), reaction time (24 h), and amount of enzyme (10% mass ratio to oil) were also optimized for methanol alone. The same parameters were adopted for the other acyl acceptors too. Among the different acyl acceptors - methanol, whose reaction parameters were optimized showed maximum conversion of triglycerides to FAAE-94% with PE and 84% with WCB. On the whole, PE showed better catalytic converting ability with all the acyl acceptor compared to WCB. Gas chromatography analysis (GC) was done to determine the fatty acid composition of WCO (sunflower oil) and FAAE production with different acyl acceptors.     

Removal of congo red from aqueous solution by bagasse fly ash and activated carbon: kinetic study and equilibrium isotherm analyses

Present investigation deals with the utilisation of bagasse fly ash (BFA) (generated as a waste material from bagasse fired boilers) and the use of activated carbons-commercial grade (ACC) and laboratory grade (ACL), as adsorbents for the removal of congo red (CR) from aqueous solutions. Batch studies were conducted to evaluate the adsorption capacity of BFA, ACC and ACL and the effects of initial pH (pH(0)), contact time and initial dye concentration on adsorption. The pH(0) of the dye solution strongly affected the chemistry of both the dye molecules and BFA in an aqueous solution. The effective pH(0) was 7.0 for adsorption on BFA. Kinetic studies showed that the adsorption of CR on all the adsorbents was a gradual process. Equilibrium reached in about 4h contact time. Optimum BFA, ACC and ACL dosages were found to be 1, 20 and 2 g l(-1), respectively. CR uptake by the adsorbents followed pseudo-second-order kinetics. Equilibrium isotherms for the adsorption of CR on BFA, ACC and ACL were analysed by the Freundlich, Langmuir, Redlich-Peterson, and Temkin isotherm equations. Error analysis showed that the R-P isotherm best-fits the CR adsorption isotherm data on all adsorbents. The Freundlich isotherm also shows comparable fit. Thermodynamics showed that the adsorption of CR on BFA was most favourable in comparison to activated carbons.     

Effect of rubber factory effluent on seed germination and seedling growth of Vigna radiatus L

Physico-chemical analysis of the rubber factory effluents revealed high amounts of total suspended and dissolved solids. Sulphate, phosphate, total nitrogen were also present in significant amounts. At higher concentration (above 50%) of effluent, the seed germination percentage was retarded. Diluted effluent (upto 50%) favoured seedling growth. Length of root system, shoot system and number of lateral roots were increased by low concentrations of effluent.     

Alpha-tocopherol supplementation on chromium toxicity: a study on rat liver and kidney cell membrane

Membrane damage is one of the important consequence of chromium,an environmental toxicant,to produce cytotoxicity.α-tocopherol,a membrane protectant can be used to reduce the chromium-induced membrane damage.In the present study,the impact of chromium in presence and absence of α-tocopherol was studied on plasma membrane of live and kidney in male Wistar rats(80-100g body weight).Significant increase in membrane cholesterol level as well as significant decrease in membrane phospholipid level in chromium exposed(0.8mg/100g body weight/d,i.p.,for 4 weeks)animals suggest structural alteration of both liver and kidney plasma memebrane.The alkaline phosphatase,total ATPase and Na^ -K^ -ATPase activities of plasma membrane were significantly decreased in both liver and kidney after chromium treatment.However,α-tocopherol (30mg/100g diet)supplementation can restrict the changes in these membrane-bound enzyme activities.Thus,the usefulness of dietary supplementation of α-tocopherol to restrain the chromium-induced membrane damage is suggested.     

Bioaccumulation of organochlorine pollutants in the fish community in Lake Årungen,Norway

Organochlorine pollutants in the major fish species (pike Esox lucius, perch Perca fluviatilis, and roach Rutilus rutilus) of Lake Årungen, Norway, were investigated after an extensive removal of large pike in 2004. The organochlorine pollutants detected in fish liver samples in 2005 were dichlorodiphenyltrichloroethane (DDTs), polychlorinated biphenyls (PCBs), hexachlorobenzene (HCB), and heptachlor epoxide (HCE). DDTs were the dominant among all analyzed OCs. ΣPCB and HCB, detected in fish from two clearly distinct trophic levels (prey and predators), give an indication of biomagnification. All OC concentrations in female pike were significantly lower compared to males, which might be due to the removal of high concentrations of pollutants in roe during spawning.     

Engineering of mono-dispersed mesoporous TiO2 over 1-D nanorods for water purification under visible light irradiation

Environmental Science and Pollution Research - Herein we synthesized a novel structure of mesoporous TiO2 decorated on 1D ZnO nanorods for environmental remediation. The effect of mesoporous TiO2...     

Innovative models of power generation: the captive-collective experience of consumer participation in power development in India

While the need for power increases, and costs of generation are on the rise, developing nations face the particular challenge of developing power systems despite a lack of national and local government funds. In this paper, it is suggested that consumer participation, technical innovation, and managerial flexibility may provide the answers, and the Andhra Pradesh Gas Power Corporation Limited in India is offered as a model venture which successfully responds to the region's power and resource specifications. Through the formation of a 'captive-collective' and 'capital-cooperative' plant, a joint venture of the Andhra Pradesh State Electricity Board and some bulk industrial consumers, the respective needs of all parties were met with great success. Such large-scale power projects, set up and managed by consumers with the technical assistance of State Electricity Boards, can substantially reduce costs for consumers while engaging in technologies that reduce environmental pollution and resource degradation. Consumer participation is highlighted as the key element for positive power development, and it is argued that the success of projects such as the one undertaken in Andhra Pradesh illustrate the possibility and necessity for consumer-initiated and consumer-managed power ventures.     

Dominance based fuzzy decision support framework for g-resilient (ecosilient) supplier selection: an empirical modelling

A novel decision support framework has been proposed herein to solve supplier selection problems by considering green as well as resiliency criteria, simultaneously. An expert team involving a finite number of Decision-Makers (DMs) is to be employed to obtain degree of importance of each of the evaluation criteria and also to assign an appropriate rating for each supplier alternative with respect to the criteria. Since subjective human judgment often bears some sort of ambiguity as well as vagueness, application of fuzzy set theory can be recommended in this context. The present work represents a dominance based decision support system in the light of fuzzy set theory which is basically a simplified version of TODIM and PROMETHEE. It explores dominance between two alternatives with respect to a particular criterion, based on which a global dominance measure is computed to facilitate ranking order of candidate suppliers. The approach proposed in this research seems straightforward which can exclude complex and tedious computational steps of TODIM as well as PROMETHEE. Application potential of the proposed dominance based fuzzy decision-making approach has been compared to that of Fuzzy-TOPSIS and Fuzzy-VIKOR. Good agreement has been observed. In addition to this, the concept of a unique performance index i.e. ‘g-resilient’ (also called ‘ecosilient’) index has been introduced to help in assessing suppliers’ overall performance extent. The work has also been extended to identify the ill (poor)-performing areas in which suppliers are lagging and seek further improvement towards enhancing g-resilient performance level.     

Preparation of Alginic Acid and Metal Alginate from Algae and their Comparative Study

Alginic acid and metal alginates are prepared from fresh algae using extraction method. A FTIR spectrum indicates that alginic acid is converted into the metal alginate. Comparing calcium and cobalt alginates, asymmetric stretching of free carboxyl group of calcium alginate at 1630 cm⁻¹ is shifted to 1585 cm⁻¹ in cobalt alginate, due to the change of charge density, radius and atomic weight of the cation, creating a new environment around the carbonyl group. The strong exothermic peak of alginic acid in DSC thermogram indicates the decomposition of biopolymer, whereas strong exothermic peak of metal alginate in DSC thermogram attributed to the decomposition of biopolymer and formation of respective carbonate. Based on DSC study, the decomposition of cobalt alginate occurs at higher temperature comparing to those of sodium and calcium alginate, which may conclude into the higher stability of cobalt alginate. TGA results reveal that, cobalt alginate is more stable than calcium and sodium alginate at 300 °C temperature. Surface morphology (at same magnification), as well as porosity (%) and pore size distribution results change with metals present in different metal alginates.     

The Accuracy of Mortality Reporting in Displaced Persons Camps During the Post-emergency Phase

For humanitarian organisations, accurate data are essential to identify emerging health problems and determine programme needs. We visited 45 post-emergency phase displaced persons camps and collected three months' mortality data which we compared with organisations' routine mortality reports. Organisations reported 612 deaths and we identified 741 deaths, for a mortality-reporting ratio, defined as the number of organisation-reported deaths divided by the number of investigator-identified deaths, of 83 per cent. For the majority of camps which under-reported deaths, mortality reporting ratios were significantly higher for women than men, and for camps with central mortality registers rather than those without. In the few camps which over-reported deaths, these occurred primarily among children younger than five years of age, probably due to the inclusion of abortions and stillbirths. Despite the overall under-reporting of deaths by humanitarian organisations, the existing health information systems appear to estimate mortality rates adequately in these post-emergency camps. However, organisations should improve the precision and completeness with which they report the characteristics of deaths in order to provide valuable data to target their programmes at the most vulnerable people.