Heavy metal contamination from mining sites in South Morocco: 1. Use of a biotest to assess metal toxicity of tailings and soils

Our work was conducted to investigate the heavy metal toxicity of tailings and soils collected from five metal mines located in the south of Morocco. We used the MetPAD biotest Kit which detects the toxicity specifically due to the heavy metals in environmental samples. This biotest initially developed to assess the toxicity of aquatic samples was adapted to the heterogeneous physico-chemical conditions of anthropogenic soils. Contrasted industrial soils were collected from four abandoned mines (A, B, C and E) and one mine (D) still active. The toxicity test was run concurrently with chemical analyses on the aqueous extracts of tailings materials and soils in order to assess the potential availability of heavy metals. Soil pH was variable, ranging from very acidic (pH 2.6) to alkaline values (pH 8.0-8.8). The tailings from polymetallic mines (B and D) contained very high concentrations of Zn (38,000-108,000 mg kg(-1)), Pb (20,412-30,100 mg kg(-1)), Cu (2,019-8,635 mg kg(-1)) and Cd (148-228 mg kg(-1)). Water-extractable metal concentrations (i.e., soil extracts) were much lower but were highly toxic as shown by the MetPAD test, except for soils from mines A, E and site C3 from mine C. The soil extracts from mine D were the most toxic amongst all the soils tested. On this site, the toxicity of soil water extracts was mainly due to high concentrations of Zn (785-1,753 mg l(-1)), Cu (1.8-82 mg l(-1)) and Cd (2.0-2.7 mg l(-1)). The general trend observed was an increase in metal toxicity measured by the biotest with increasing available metal contents in tailings materials and soils. Therefore, the MetPAD test can be used as a rapid and sensitive predictive tool to assess the heavy metal availability in soils highly contaminated by mining activities.     

Application of life cycle assessment for hospital solid waste management: A case study

This study was meant to determine environmental aspects of hospital waste management scenarios using a life cycle analysis approach. The survey for this study was conducted at the largest hospital in a major city of Pakistan. The hospital was thoroughly analyzed from November 2014 to January 2015 to quantify its wastes by category. The functional unit of the study was selected as 1 tonne of disposable solid hospital waste. System boundaries included transportation of hospital solid waste and its treatment and disposal by landfilling, incineration, composting, and material recycling methods. These methods were evaluated based on their greenhouse gas emissions. Landfilling and incineration turned out to be the worst final disposal alternatives, whereas composting and material recovery displayed savings in emissions. An integrated system (composting, incineration, and material recycling) was found as the best solution among the evaluated scenarios. This study can be used by policymakers for the formulation of an integrated hospital waste management plan.

Implications: This study deals with environmental aspects of hospital waste management scenarios. It is an increasing area of concern in many developing and resource-constrained countries of the world. The life cycle analysis (LCA) approach is a useful tool for estimation of greenhouse gas emissions from different waste management activities. There is a shortage of information in existing literature regarding LCA of hospital wastes. To the best knowledge of the authors this work is the first attempt at quantifying the environmental footprint of hospital waste in Pakistan.     

Wetting mechanism and morphological adaptation; leaf rolling enhancing atmospheric water acquisition in wheat crop—a review

Environmental Science and Pollution Research - Several plant species such as grasses are dominant in many habitats including arid and semi-arid areas. These species survive in these regions by...     

Evaluation of Different Scales for Measurement of Perceived Physical Strain During Performance of Manual Tasks

The main objective of this study was to evaluate different scales of perceived strain during the performance of various physical tasks. A total of 52 male and female participants took part in 4 experiments to achieve the study objective. The results suggest that a bipolar comfort-discomfort scale is a more appropriate instrument than a discomfort scale for assessing cumulative physical stresses at work, especially at the beginning of the shift. For assessing discomfort at the end of the work shift, a unipolar scale may also be used. On the basis of the obtained results, red, green, and yellow zones are suggested to establish priorities for work redesign efforts in ergonomic control programs.     

Multiple dimensions of work-related risk factors and their relationship to work ability among industrial workers in Iran

Objectives. The present study was designed to investigate the simultaneous effects of physical, psychosocial and other work-related risk factors on the work ability index (WAI) score among industrial workers. Methods. This study used a cross-sectional design with a questionnaire survey. A total of 280 workers were included in the study. Data were collected using three questionnaires including the Persian version of the WAI, the Persian version of the job content questionnaire and an author-developed measure (to assess work-related factors, health-related factors and socio-demographic characteristics). Results. The majority of the participants were young, but they had poor WAI scores (mean 37.3?±?6.4) and 44.3% of them had poor or moderate work ability. Occupational accidents and injuries were found to be the strongest predictors of WAI scores. Additionally, there was a strong association between WAI scores and supervisor support, skill discretion, occupational training, sleep quality, work nature and educational level. Conclusions. Intervention programs should focus on improving supervisor support, sleep quality, job skills and knowledge and on decreasing physical and mental work demands. Additionally, implementing a comprehensive occupational health and ergonomics program for controlling and reducing hazardous working environments and occupational injury rates should be considered.     

Optimizing safety-constrained solvent selection for process systems with economic uncertainties

Solvents are very commonly used in industrial facilities for a multitude of reasons. Traditionally, solvent selection has been based on minimizing the process operating cost while satisfying a set of operational requirements. Regrettably, safety considerations have typically been overlooked during the design phase. In this paper, a systematic approach is introduced to integrate safety issues into solvent selection and provides a computationally effective method for establishing tradeoffs between the economic and safety objectives. In order to quantify the risk associated with the solvent, we focus on the potential spillage of the solvent and introduce a risk index that is a function of the amount of solvent used and stored, as well as the Permissible Exposure Limit (PEL) dictated by regulatory directives. An optimization formulation is developed and the associated mathematical program solved to select optimal solvents and blends while incorporating economic, technical, and safety considerations. Tradeoff (Pareto) curves are developed to represent the multi-objective optimization results and tradeoffs. Furthermore, economic-data uncertainty and variability over expected ranges are included in the optimization formulation to conduct an insightful sensitivity analysis. Finally, an illustrative case study is considered via increasing levels of complexity in order to evaluate the proposed optimization method which considers both operating cost and safety risk implications in the presence of economic uncertainties.     

Ingestion and egestion of microplastic by aquatic insects in Egypt wastewater

Microplastics (MPs) are frequently regarded as environmental and biota contaminants. Yet, research on the accumulation of MPs in living entities, particularly aquatic insects that serve as food resources in the aquatic food chain, is limited. This study to investigate the accumulation of MPs in aquatic insects from water and sediment in an Egyptian wastewater basin. Four typical freshwater insect groups were used. The highest MP load per gram wet weight was reported by collector-gatherers (Chironomus sp. and Hydrophilus sp.), followed by collector-filterers (Culex sp.) with the second highest MP load. However, Predators (Aeshna sp.) had the lowest values. Also, the present results showed a reduction in the number of MPs in all insect taxa tested after a 24 h depuration time, with differences in the observed egestion ability. The mean number of MPs per individual significantly reduced after 24 h in both Chironomus sp. and Culex sp. larvae, where 53% and 40% of MPs particles were ejected from them, respectively. However, the ability of MP egestion decreases in Aeshna sp. nymph (25%), and the lowest proportion of ejection was observed in Hydrophilus sp. adults (9%). Polyethylene terephthalate fibers were the most abundant type of MP in both sediment and water, followed by fragments (polyethylene and polypropylene). Yet, only polyester fibers were detected in the various insect species. The average length of fibers in the various insects was somewhat shorter than in the surrounding environment. The current study reveals that MP ingestion by aquatic insects is not always related to levels of pollution in the environment, since other factors such as feeding strategies may play a role in MP ingestion. Based on these observations, further studies should be carried out on studies on toxicological impacts of MPs on freshwater/aquatic biota.     

Does Wetland Location Matter When Managing Wetlands for Watershed‐Scale Flood and Drought Resilience?

Wetland protection and restoration strategies that are designed to promote hydrologic resilience do not incorporate the location of wetlands relative to the main stream network. This is primarily attributed to the lack of knowledge on the effects of wetland location on wetland hydrologic function (e.g., flood and drought mitigation). Here, we combined a watershed‐scale, surface–subsurface, fully distributed, physically based hydrologic model with historical, existing, and lost (drained) wetland maps in the Nose Creek watershed in the Prairie Pothole Region of North America to (1) estimate the hydrologic functions of lost wetlands and (2) estimate the hydrologic functions of wetlands located at different distances from the main stream network. Modeling results showed wetland loss altered streamflow, decreasing baseflow and increasing stream peakflow during the period of the precipitation events that led to major flooding in the watershed and downstream cities. In addition, we found that wetlands closer to the main stream network played a disproportionately important role in attenuating peakflow, while wetland location was not important for regulating baseflow. The findings of this study provide information for watershed managers that can help to prioritize wetland restoration efforts for flood or drought risk mitigation.     

ModelOps for enhanced decision-making and governance in emergency control rooms

Environment Systems and Decisions - For mission critical (MC) applications such as bushfire emergency management systems (EMS), understanding the current situation as a disaster unfolds is critical...