Small drinking water systems under spatiotemporal water quality variability: a risk-based performance benchmarking framework

Traditional approaches for benchmarking drinking water systems are binary, based solely on the compliance and/or non-compliance of one or more water quality performance indicators against defined regulatory guidelines/standards. The consequence of water quality failure is dependent on location within a water supply system as well as time of the year (i.e., season) with varying levels of water consumption. Conventional approaches used for water quality comparison purposes fail to incorporate spatiotemporal variability and degrees of compliance and/or non-compliance. This can lead to misleading or inaccurate performance assessment data used in the performance benchmarking process. In this research, a hierarchical risk-based water quality performance benchmarking framework is proposed to evaluate small drinking water systems (SDWSs) through cross-comparison amongst similar systems. The proposed framework (R _WQI framework) is designed to quantify consequence associated with seasonal and location-specific water quality issues in a given drinking water supply system to facilitate more efficient decision-making for SDWSs striving for continuous performance improvement. Fuzzy rule-based modelling is used to address imprecision associated with measuring performance based on singular water quality guidelines/standards and the uncertainties present in SDWS operations and monitoring. This proposed R _WQI framework has been demonstrated using data collected from 16 SDWSs in Newfoundland and Labrador and Quebec, Canada, and compared to the Canadian Council of Ministers of the Environment WQI, a traditional, guidelines/standard-based approach. The study found that the R _WQI framework provides an in-depth state of water quality and benchmarks SDWSs more rationally based on the frequency of occurrence and consequence of failure events.     

Assessment of irrigation water quality. A proposal of a quality profile

Water quality indices provide a simple and understandable tool for managers on the quality and possible uses for irrigation water, however an individual quality factor alone is not enough to evaluate the irrigation water quality because it could be restrictive and sometime it could give an unfavorable qualification. The aim of this paper was propose a quality profile of irrigation water using the preexisting water quality indices to be applied to arid and semi-arid regions. As a case studied, the water of the Del Molle River (Nogolí, San Luis, Argentina) was researched. Samples were collected during the period October 2005-May 2006. Conductivity, pH, total hardness, sulphate, nitrate, nitrite, alkalinity, chloride, sodium, potassium, TDS, DO and phosphate were analyzed. The irrigation water quality, according to Riverside Norm, belongs to C(2)-S(1) class, according to Wilcox Norm as excellent to good, according to Scott quality factor it is good and according to SAR < 10 and according to RCS it is recommendable. From the obtained data, it can be concluded that the water quality profile was good, so it is useful for normal irrigation agriculture.     

Water quality assessment, by statistical analysis, on rural and urban areas of Chocancharava River (Río Cuarto), Córdoba, Argentina

Water quality has degraded dramatically in the Chocancharava River (Río Cuarto, Córdoba, Argentina) due to point and non-point sources. This paper aims to assess spatial and temporal variations of physical and chemical parameters of the river. Six sampling sites and six sampling campaigns were developed. During the period 2007–2008, wet and dry seasons were included. A statistical analysis was carried out with 23 physical and chemical variables. Then, a new statistical analysis was carried out including the Riparian Corridors Quality Index and the physical and chemical variables (24 variables). Considering a multivariate system, analysis of variance, principal component analysis and cluster analysis were used. From the statistical analysis, the river was divided into two zones with different degrees of contamination. The most polluted zone is due to pollution inputs of urban, industrial and agricultural sources. This area showed a remarkable deterioration in water quality, mainly due to wastewater discharges. According to Riparian Quality, better results were found in sections of poor water quality, due to the fact that the river bank forest was less degraded downstream of the sewage discharge.     

Butyltin compounds and their relation with organic matter in marine sediments from San Vicente Bay—Chile

Tributyltin and its degradation products, mono-and dibutyltin have been determined in sediments collected in some representative sites in San Vicente Bay, Chile. The organic matter contents of sediments and water collected simultaneously from the same sampling sites were also determined. High levels of total organic carbon were found in sediments, especially in those from the northern part of the bay (1.80-8.87%). Good correlations were found between total organic carbon and the oxidizable and refractory carbon fractions. Among the butyltin species determined, TBT presented the highest levels, ranging from 14 to 1,560 ng Sn g(-1) dry weight. Concentration ratios of TBT to DBT ranged between 1.33 and 3.10, showing a high degree of contamination in sediments of this Chilean bay. All data obtained were analysed by the chemometric method of principal components analysis. A strong correlation was found between TBT and DBT concentrations in sediments, the different organic matter contents in sediments and water. In marine organisms only TBT was detected, containing the filterer organism Semele solida higher level than Perumytilus purpuratus and Pyura chilensis (220, 150 and 120 ng Sn g(-1) dry weight, respectively). For the alga Rodoficea iridae the TBT concentration was 60 ng Sn g(-1) dw. Comparatively, these values are higher than those reported for the same kind of marine organisms worldwide. The different samples from San Vicente Bay were found to be contaminated by TBT. This contamination can be attributed to the different anthropogenic activities taking place in the bay.     

Spatial and seasonal distribution of 17 endocrine disruptor compounds in an urban estuary (Mondego River,Portugal): evaluation of the estrogenic load of the area

The Mondego River estuary demonstrates signs of pollution, but the levels of endocrine disrupting compounds (EDCs), such as the natural (17β-estradiol and estrone) and pharmaceutical (17α-ethynylestradiol) estrogens, xenoestrogenic industrial pollutants (4-octylphenol, 4-nonylphenol, and their mono- and diethoxylates and bisphenol A), phytoestrogens (formononetin, biochanin A, daidzein, and genistein), and sitosterol were either poorly or never measured in this area. Thus, to conclude about the influx of EDCs in this estuary, water samples were taken every 2 months, during 1 year (2010) in low tide, at eight sites distributed along the estuary. Water samples (1 L) were preconcentrated in the Oasis HLB cartridges and cleaned in silica cartridges before their analysis by GC-MS. In summer, potentially hazardous amounts of estrogens (≈26 ng L^?1), alkylphenols (≈11.5 μg L^?1), alkylphenolethoxylates (≈13 μg L^?1), and phytoestrogens (≈5.6 μg L^?1) were measured. These data suggest that changes in the hydrodynamics of the estuary coupled with the increase of water temperatures interfere with the amount of EDCs in the water. Complementary physicochemical parameters also point to high levels of anthropogenic pollution in this area. Globally, the estrogenic load, expressed in ethynylestradiol equivalents, attained 71.8 ng L^?1 demonstrating that, all together, the measured EDCs pose important health risks for both biota and humans.     

Dividivi tannins: an ecological product for water-based drilling fluids

Modified tannins are used as deflocculant additives in the formulation of water-based drilling fluids (WBDF) for drilling operations in any scenario. Due to their high heavy metals content, these additives are toxic and hazardous for any environmental scenario. Deflocculant efficiency of unmodified tannins (UDT) extracted from fruit pods of “dividivi” (Caesalpinia coriaria) as an additive for WBDF was assessed. Raw materials for UDT elaboration come from the rural and sustainable exploitation of natural occurring dividivi trees, growing in dry tropical forests in Anzoátegui state (Orinoco Oil Belt, eastern Venezuela). The tannins extract, in the form of dividivi fruit powder, contains 47.0 % of total tannins (hydrolyzable tannins plus condensed tannins), of which 67.4 % corresponds to hydrolyzable tannins. Dividivi tannins in WBDF showed nine (9) times deflocculant efficiency than heavy metals commercial modified tannins. Moreover, commercial modified tannins do not improve their deflocculant efficiency with increased tannin content. Ecotoxicological studies were carried out for WBDF formulations with UDT, using freshwater microalgae Scenedesmus dimorphus as chronic toxicity bioindicator. Toxicity bioassays performed with these microalgae did not show significant effects on its population growth. The EC₅₀ values resulted in over 100,000 mg L^?1, and these formulations were therefore considered non-toxic. Values of LC₅₀ obtained this time with Poecilia reticulata, as acute toxicity bioindicator are around 100,000 mg L^?1, with no significant effects on population mortality. Thus, WBDF formulated with UDT can be considered non-toxic formulations for populations of this freshwater fish. From the social perspective, the use of UDT in WBDF fosters organized communities economical activities based on the maintenance of a sustainable supply chain for processing fruits in a quantity enough to obtain three thousand seven hundred fifty kilograms (3750 Kg). The UDT so obtained was used as deflocculant in four (4) oil wells producing excellent performance and relevant savings compared with commercial modified tannin.     

Real-world emissions of in-use off-road vehicles in Mexico

Off-road vehicles used in construction and agricultural activities can contribute substantially to emissions of gaseous pollutants and can be a major source of submicrometer carbonaceous particles in many parts of the world. However, there have been relatively few efforts in quantifying the emission factors (EFs) and for estimating the potential emission reduction benefits using emission control technologies for these vehicles. This study characterized the black carbon (BC) component of particulate matter and NOx, CO, and CO₂ EFs of selected diesel-powered off-road mobile sources in Mexico under real-world operating conditions using on-board portable emissions measurements systems (PEMS). The vehicles sampled included two backhoes, one tractor, a crane, an excavator, two front loaders, two bulldozers, an air compressor, and a power generator used in the construction and agricultural activities. For a selected number of these vehicles the emissions were further characterized with wall-flow diesel particle filters (DPFs) and partial-flow DPFs (p-DPFs) installed. Fuel-based EFs presented less variability than time-based emission rates, particularly for the BC. Average baseline EFs in working conditions for BC, NOx, and CO ranged from 0.04 to 5.7, from 12.6 to 81.8, and from 7.9 to 285.7 g/kg-fuel, respectively, and a high dependency by operation mode and by vehicle type was observed. Measurement-base frequency distributions of EFs by operation mode are proposed as an alternative method for characterizing the variability of off-road vehicles emissions under real-world conditions. Mass-based reductions for black carbon EFs were substantially large (above 99%) when DPFs were installed and the vehicles were idling, and the reductions were moderate (in the 20–60% range) for p-DPFs in working operating conditions. The observed high variability in measured EFs also indicates the need for detailed vehicle operation data for accurately estimating emissions from off-road vehicles in emissions inventories.

Implications: Measurements of off-road vehicles used in construction and agricultural activities in Mexico using on-board portable emissions measurements systems (PEMS) showed that these vehicles can be major sources of black carbon and NO_X. Emission factors varied significantly under real-world operating conditions, suggesting the need for detailed vehicle operation data for accurately estimating emissions inventories. Tests conducted in a selected number of sampled vehicles indicated that diesel particle filters (DPFs) are an effective technology for control of diesel particulate emissions and can provide potentially large emissions reduction in Mexico if widely implemented.     

Bacterial Cellulose from Simple and Low Cost Production Media by Gluconacetobacter xylinus

Bacterial cellulose pellicles were produced by Gluconacetobacter xylinus using non conventional low-cost carbon sources, such as glycerol remaining from biodiesel production and grape bagasse, a residue of wine production. The carbon sources assayed showed their suitability for microbial cellulose production, with relatively high production values such as 10.0 g/l for the culture medium with glycerol from biodiesel as carbon source and corn steep liquor as nitrogen source; and 8.0 g/l for the culture medium containing grape bagasse and corn steep liquor. Glucose, commercial glycerol and cane molasses were also assayed as carbon sources for comparison. The bacterial celluloses produced were characterized by means of scanning electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy and thermogravimetric analysis. Morphological analysis showed that bacterial cellulose microfibrils produced from the non-conventional media used were several micrometers long and had rectangular cross-sections with widths and thicknesses in the range of 35–70 and 13–24 nm, respectively. X-ray patterns showed crystallinity levels in the range of 74–79 % (area method), whereas both X-ray patterns and infrared spectroscopy evidenced the presence of peaks characteristic of Cellulose I polymorph. Besides thermal properties were similar to those found for the pellicle obtained from glucose. The study performed showed the suitability of using wine residues or glycerol remaining from increasing biodiesel production as cheap carbon sources for production of bacterial cellulose microfibrils, with similar characteristics as those obtained by use of more expensive carbon sources such as glucose or commercial glycerol. On the other hand, the low cost nitrogen sources used (corn steep liquor or diammonium phosphate) also contributed to the economy of the bioprocess.     

The use of a lacertid lizard as a model for reptile ecotoxicology studies: part 2--biomarkers of exposure and toxicity among pesticide exposed lizards

As part of a wider study examining the impacts of corn pesticides on lacertid lizards in north-western Portugal, we examined various physiological, biochemical, and histological biomarkers of exposure and effect among field populations of Podarcis bocagei. Biomarkers included body condition index, standard metabolic rate, locomotor performance, parasitization, glutathione oxidative pathways and related enzyme activity, lipid peroxidation and liver and testis histology. Few of the various biomarkers investigated provided statistically significant evidence of toxic effect. However, using a weight of evidence approach, we conclude that pesticides are affecting lizards living in the vicinity of pesticide exposed corn agriculture sites. Lizards from these locations present a profile of animals under metabolic stress with reduced condition indices, increased standard metabolic rate, lower incidence of hepatocyte vacuolation, altered iron metabolism, increased activation of GSH oxidation pathways, and even increased prevalence of hemoparasites.