Mineralization of integrated gasification combined-cycle power-station wastewater effluent by a photo-fenton process

The aim of this work was to study the mineralization of wastewater effluent from an integrated-gasification combined-cycle (IGCC) power station sited in Spain to meet the requirements of future environmental legislation. This study was done in a pilot plant using a homogeneous photo-Fenton oxidation process with continuous addition of H₂O₂ and air to the system.The mineralization process was found to follow pseudo-first-order kinetics. Experimental kinetic constants were fitted using neural networks (NNs). The NNs model reproduced the experimental data to within a 90% confidence level and allowed the simulation of the process for any values of the parameters within the experimental range studied. At the optimum conditions (H₂O₂ flow rate = 120 mL/h, [Fe(II)] = 7.6 mg/L, pH = 3.75 and air flow rate = 1 m³/h), a 90% mineralization was achieved in 150 min.Determination of the hydrogen peroxide consumed and remaining in the water revealed that 1.2 mol of H₂O₂ was consumed per each mol of total organic carbon removed from solution. This result confirmed that an excess of dissolved H₂O₂ was needed to achieve high mineralization rates, so continuous addition of peroxide is recommended for industrial application of this process.Air flow slightly improved the mineralization rate due to the formation of peroxo-organic radicals which enhanced the oxidation process.     

Use of coatings to minimise acid emissions during ceramic tile firing

The manufacture of traditional ceramic products (ceramic tiles, roof tiles, and bricks) is often associated with the emission of F, Cl, and S compounds during the firing stage. According to the literature, fluorine emissions can be reduced by adding CaCO₃ to the raw materials mixture used in fabricating these products. However, data available to the authors indicate that this procedure, which has been successfully applied in manufacturing structural ceramics (roof tiles and bricks), is ineffective in ceramic tile manufacture and modifies tile end properties.This paper examines the possibility of reducing such emissions by applying coatings of alkaline-earth carbonates on to the ceramic tile bottom surface to retain the acid compounds emitted during tile firing. The effectiveness of MgCO₃, CaCO₃, SrCO₃, and BaCO₃ coatings for retaining these acid emissions was studied, using the evolved gas analysis (EGA) technique with a TG-DSC-FTIR-QM instrument.The SrCO₃ coating was found to provide the greatest retention, showing that SO₂ and HCl were retained more efficiently than HF. The presence of fluorides, chlorides, and sulphates of Ca, Sr, and Ba was verified in the respective fired coatings, confirming the existence of chemical reactions between the emitted acid compounds and the coating materials at high temperature.     

Environmental assessment of dehydrated alfalfa production in Spain

Alfalfa is the major forage crop produced in temperate regions worlwide. Although this crop is currently used mainly for producing high-value livestock feed, its application for bioenergy production is a recent focus of interest. Even though it is not mandatory, alfalfa is normally dried in order to improve the quality of the final product. In this study, Life Cycle Assessment (LCA) was used to quantify the environmental impacts linked to alfalfa production in the major cultivation zone in Spain (Ebro Valley), including field activities, dehydration and transport to farms for livestock feeding. In addition, the identification of the most relevant processes contributing to the environmental impact and the potential improvements actions were also defined as objectives. Inventory data were obtained mainly from interviews with farmers complemented with published literature and comments from experts.LCA results were obtained for global warming, acidification, eutrophication, photochemical oxidant formation, land use, non-renewable cumulative energy demand and human, terrestrial and aquatic ecotoxicities. Within the life cycle of alfalfa, the dehydration process, production of phosphate fertilizer, application of nitrogen fertilizers and pesticides, water consumption and final transport to the consumer (by road and ship) were identified as hot spots. Based on these, some improvement measures were proposed and evaluated: (i) reduction of the moisture content of alfalfa and the use of a higher percentage of biomass for combustion in the dehydration process, (ii) no application of nitrogen fertilizer in maintenance years and (iii) use of more efficient trucks for transport. Their implementation would produce significant reduction of eutrophication, global warming, acidification, non-renewable cumulative energy demand and, to a lesser extent, photochemical oxidation formation and human toxicity impacts.     

Leaching of mecoprop and dichlorprop in calcareous soil. Effect of the exogen organic matter addition in this process

Abstract

Leaching studies of mecorprop (R,S)‐2‐(4‐chloro‐2‐methylphenoxy)propanoic acid, and dichlorprop, (R,S)‐2‐(4‐chloro‐2,4‐dichlorophenoxy) propanoic acid, under saturated conditions were conducted in unamended and amended soil columns. The purpose of the study was to investigate the leaching of these herbicides in three type of soils and the exogen organic matter effect on this process. The leaching patterns could be related to variation in the soil texture and diffusion processes of the herbicides into micropores within the walls of conducting pore. The leaching rate in the amended soil columns decreased with the addition of organic matter. The breakthrough curves (BTC) of these herbicides in the leachates of the amended soil columns were wider and more diffused than the BTC obtained for the corresponding unamended soil. The theoretical BTC overestimated the pore volume required for the displacement of these pesticides from the soil column. This may be due to the differences in the adsorption process between the bacth and soil columns methods     

The role of wax and resin in the nestmate recognition system of a stingless bee, Tetragonisca angustula

Recent research has shown that entrance guards of the stingless bee Tetragonisca angustula make less errors in distinguishing nestmates from non-nestmates than all other bee species studied to date, but how they achieve this is unknown. We performed four experiments to investigate nestmate recognition by entrance guards in T. angustula. We first investigated the effect of colony odours on acceptance. Nestmates that acquired odour from non-nestmate workers were 63% more likely to be rejected while the acceptance rate of non-nestmates treated with nestmate odour increased by only 7%. We further hypothesised that guards standing on the wax entrance tube might use the tube as an odour referent. However, our findings showed that there was no difference in the acceptance of non-nestmates by guards standing on their own colony’s entrance tube versus the non-nestmate’s entrance tube. Moreover, treatment of bees with nestmate and non-nestmate resin or wax had a negative effect on acceptance rates of up to 65%, regardless of the origin of the wax or resin. The role of resin as a source of recognition cues was further investigated by unidirectionally transferring resin stores between colonies. Acceptance rates of nestmates declined by 37% for hives that donated resin, contrasting with resin donor hives where acceptance of non-nestmates increased by 21%. Overall, our results confirm the accuracy of nestmate recognition in T. angustula and reject the hypothesis that this high level of accuracy is due to the use of the wax entrance tubes as a referent for colony odour. Our findings also suggest that odours directly acquired from resin serve no primary function as nestmate recognition cues. The lack of consistency among colonies plus the complex results of the third and fourth experiments highlight the need for further research on the role of nest materials and cuticular profiles in understanding nestmate recognition in T. angustula.     

Atmospherically deposited major and trace elements in the winter snowpack along a gradient of altitude in the Central Pyrenees: The seasonal record of long-range fluxes over SW Europe

The chemistry of high mountain snowpacks is a result of the long-range atmospheric transport and deposition of elements. Pyrenean snowpacks contain information about the fluxes of elements over SW Europe in winter. Here we analysed Al, Ti, Mn, Fe, Ni, Cu, Zn, As, Se, Cd and Pb in the 2004–05 winter snowpack in the Central Pyrenees, at an altitude range of 1820–3200 m a.s.l. Ni, As, Se and Cd were not detected in most cases. The concentrations of the remaining elements were comparable to those found in other high mountain areas in Europe and North America considered representative of regional background of atmospheric deposition in populated areas. In contrast, our measurements were higher than those of polar areas, which represent the global background. Single measurements of concentrations and snow accumulation were subject to considerable spatial variability, which may be attributable to strong wind drift and other post-depositional processes. The major ions chemistry of the snow indicated three possible origins for the solutes: terrigenous dust, sea salt spray and polluting S and N aerosols. We found no association between Cu, Zn and Pb and any of these possible sources. This observation therefore indicates that these elements were not preferentially bound to any particular kind of aerosol. Snow collected at altitudes of up to 2050 m a.s.l. presented higher concentrations of several elements than snow above this altitude, thereby indicating a local influence. Snow collected above 2300 m a.s.l. was therefore more representative of broad regional inputs. At these higher altitudes, snow was not enriched in Al, Ti, Mn, Fe or As compared with the composition of the upper continental crust and the local lithology, and these elements (except Mn) appeared almost exclusively in the particulate fraction. This observation indicates that Al, Ti, Mn, Fe and As were present mainly as part of dust particles of terrigenous origin. In contrast, Cu, Zn, and Pb presented medium to high enrichment factors and showed a higher proportion of soluble forms, thereby indicating their polluting character.