Kelp gulls attack Southern right whales: a conservation concern?

Kelp gulls (Larus dominicanus) feed on pieces of skin and blubber they rip from Southern right whales’ (Eubalaena australis) backs in their breeding areas at Península Valdés, Argentina, producing injuries. This behavior has increased since the first record in 1972, and some authors have suggested that constant gull harassment could have a negative effect on right whale population. The main goal of this study is to assess the variables that most affect the gull attacks. We analyzed 5359 whale-watching sightings made during trips from Puerto Pirámides (42o34′S, 64o16′W) along the whale breeding seasons (June–December) 2005 to 2007. The most important factors affecting the attacks include the presence of a mother–calf pair, the time within the season, the distance to the coast and the wind velocity. There is also concern of possible transmission of infectious diseases in the attacks since increasing number of whales with different patterns of skin lesions have been observed.     

Expanding the limits of the pollen-limitation concept: effects of pollen quantity and quality

Pollination commonly limits seed production, as addition of pollen to stigmas often increases fecundity. This response is usually interpreted as evidence that plants' stigmas receive too few pollen grains to maximize ovule fertilization (quantity limitation); however, many genetic studies demonstrate that poor-quality pollen can also reduce seed production (quality limitation). We explore both aspects of pollen limitation theoretically with a dose-response model that incorporates a saturating negative-exponential relation of seed production to pollen receipt. This relation depends on aspects of ovule production, pollen import, pollen-pistil interactions and seed development, all of which can contribute to pollen limitation. Our model reveals that quantity limitation is restricted to the lowest range of pollen receipt, for which siring success per pollen grain is high, whereas quality limitation acts throughout the range of pollen receipt if plants do not import the highest-quality pollen. In addition to pollinator availability and efficiency, quantity limitation is governed by all post-pollination aspects of seed production. In contrast, quality limitation depends on the difference in survival of embryos sired by naturally delivered pollen vs. by pollen of maximal quality. We briefly illustrate the distinction between these two components of pollen limitation with results from the mistletoe Tristerix corymbosus. Our model also shows that the standard pollen-supplementation technique neither estimates the total intensity of pollen limitation nor distinguishes between its quantity and quality components. As an alternative, we propose a methodological protocol that requires both measurement of seed production following excess pollination with only outcross pollen and quantification of the dose-response relation of seed output to pollen receipt. This method estimates both the total extent of pollen limitation and its two components. Finally, we consider the influences on quantity and quality limitation, which reveals that quantity limitation probably occurs much less often than has been inferred from pollen-supplementation experiments. These interpretations suggest that an expanded perspective that recognizes the fecundity consequences of pollination with poor-quality pollen would promote ecological understanding of pollen limitation.     

Analysis of environmental correlates of sexual segregation in northern elephant seals using species distribution models

Elephant seals are among the most sexually dimorphic and polygynous species of all mammals. Their foraging grounds occupy a wide area of the world oceans, where they show spatial segregation between males and females. The objective of this paper was to correlate female and male foraging distributions of Mirounga angustirostris with main climatic variables at a biogeographical scale. We used website and bibliographical sources to obtain information on adult elephant seal distribution and environmental predictors (surface and bottom sea temperatures, productivity and bathymetry) and three species distribution models [maximum entropy model, environmental niche factor analysis and based on climatic envelopes (BIOCLIM)] to predict the habitat suitability of ocean regions. BIOCLIM provided the best fit. Sea surface and bottom temperatures were the variables with the highest explanatory power for females, while bathymetry was for males. Predictive maps suggest that low temperatures constrain female, but not male, distribution at high latitudes. We suggest that large size increases foraging efficiency of males because, among other benefits, it augments thermal insulation, improving the use of cold, rich sectors of the ocean. Different thermoregulatory abilities between sexes due to size dimorphism should be a complementary explanation of sexual segregation in elephant seals.     

Anaerobic whey treatment by a stirred sequencing batch reactor (ASBR): effects of organic loading and supplemented alkalinity

An assessment was made of cheese whey treatment in a mechanically stirred anaerobic sequencing batch reactor (ASBR) containing granular biomass. The effect of increasing organic load and decreasing influent alkalinity supplementation (as sodium bicarbonate) was analyzed. The reactor operated on 8-h cycles with influent COD concentrations of 500, 1000, 2000 and 4000 mg/L, corresponding to volumetric organic loads of 0.6 to 4.8 mgCOD/L.d. Organic COD removal efficiencies were always above 90% for filtered samples. These results were obtained with an optimized alkalinity supplementation of 50% (ratio between mass of NaHCO3 added and mass of influent mgNaHCO3/mgCOD) in the assays with 500 and 1000 mgCOD/L and of 25% in the assays with 2000 and 4000 mgCOD/L. Initial alkalinity supplementation was equal to the mass of influent COD (100%). The system showed formation of viscous polymer-like substances. These were probably of microbiological origin occurring mainly at influent CODs of 2000 and 4000 mg/L and caused some biomass flotation. This could, however be controlled to enable efficient and stable reactor operation.     

Comparison of the Effect of Plasticizers on PHBV—and Organoclay—Based Biodegradable Polymer Nanocomposites

The aim of this work was to evaluate the effect of different plasticizers on the morphology, crystallization, and mechanical properties of poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV)/organomodified montmorillonite (OMt) nanocomposites. We investigated three different plasticizers: dioctyl phthalate (DOP), a commonly used additive in the polymer industry, and two natural and biodegradable plasticizers: epoxidized soybean oil (ESO) and triethyl citrate (TEC). The nanocomposites with 3 wt% OMt were obtained by melt processing in an internal mixer. The plasticizers were used alone or in combination with clay in a concentration of 10 wt%. X-ray diffraction and scanning electron microscopy results revealed a partially intercalated structure. The degree of crystallinity was higher for all of the samples compared to neat PHBV, although the melting temperature decreased with the use of plasticizers combined with OMt. The impact strength results were dependent on the interaction between the components of the system. Triethyl citrate was the most effective plasticizer due to its more pronounced interaction with the PHBV matrix, which yielded improvements in processing conditions and PHBV’s flexibility and impact properties.     

Addition of Saturated Fatty Acids to Biodegradable Films: Effect on the Crystallinity and Viscoelastic Characteristics

Biodegradable films were produced by extrusion from blends of starch, glycerol and poly(butylene adipate co-terephthalate), a biodegradable polyester, with the addition of 1.5 % (wt/wt) saturated fatty acids (caproic, lauric or stearic). Films containing fatty acids had higher crystallinity than control films and the longer the carbon chain of the acid was, the more crystalline the film. Fatty acids with up to 12 carbon atoms did not alter the viscoelastic characteristic of the films. Further, the incorporation of fatty acids did not decrease the hydrophilicity of the films in comparison with the control film without a fatty acid.     

“Return” and Extension Actions After Ethnobotanical Research: The Perceptions and Expectations of a Rural Community in Semi-arid Northeastern Brazil

The scientific community has debated the importance of “return” activities after ethnobiological studies. This issue has provoked debate because it touches on the ethics of research and the relationships with the people involved in these studies. This case study aimed to investigate community perception of an ethnobotany research project that was carried out in the semi-arid region of northeastern Brazil. Furthermore, we reported how the residents of this rural community felt about participating in the activities of “return” that arose from the projects. Our findings demonstrate that “return” activities should be planned from the design phase of the research until its closure as a lifelong process that allows the communities involved to gradually take ownership of the information and actions that are being generated. Similarly, we argue that such activities must be negotiated with the people of the community so that they have decision-making power and autonomy to decide what is most relevant to their lives.     

Evaluation of a low-cost adsorbent for removal of toxic metal ions from wastewater of an electroplating factory

In this study, sugar cane residue or bagasse was used for removal of toxic metal ions from wastewater of an electroplating factory located in northeast Brazil. Prior acid treatment increased the adsorption efficacies in batch wise experiments. The microstructure of the material before and after the treatment was investigated by X-ray diffraction, infrared spectroscopy and scanning electron microscopy. Column operations showed that removals of Cu²⁺, Ni²⁺ and Zn²⁺ from wastewater (in the absence of cyanide) were 95.5%, 96.3.0%, and 97.1%, respectively. Regeneration of the adsorbent obtained in acid indicated that the efficiencies decreased only after the fourth cycle of re-use. Acid-treated sugar cane bagasse can be considered a viable alternative to common methods to remove toxic metal ions from aqueous effluents of electroplating industries.     

Modelling Escherichia coli concentration in a wastewater reservoir using an operational parameter MRT%FE and first order kinetics

The operational parameter MRT%FE, representing the mean residence time of different ages fractions of effluent within a completely mixed reactor, was evaluated and integrated with first order kinetics. The parameter was used to model Escherichia coli concentrations in a municipal wastewater reservoir managed under different operating conditions (continuous and discontinuous). The study was conducted during 2004-2005 in a reservoir receiving effluents from the activated sludge treatment plant of Caltagirone (Eastern Sicily - Italy). The analytical approach is applied to the hydraulic state variables of the system (daily stored volumes, inlet and outlet flows), and the physical-chemical (pH, temperature, EC, TSS, BOD(5), COD) and bacteriological wastewater parameters (E. coli, FC, FS). In order to evaluate the reliability of the proposed approach, predicted E. coli concentrations within the reservoir were compared with measured ones by the correlation coefficient, F-test and Sperman's index. The study included the evaluation of die-off coefficient K(T) (d(-1)), light extinction coefficient K (m(-1)) and their relationships with climatic factors. Results of the study confirm that E. coli removal is related to the fractions of fresh effluent remaining each day within the reservoir with MRT%FE of about 5-8d, significantly lower than the nominal detention time (about 27d). The E. coli die-off coefficient (K(T)) was higher during system discontinuous operations and correlated with incident solar radiation and water temperature.