Deficit Irrigation Management of Maize in the High Plains Aquifer Region: A Review

Irrigated agriculture is a major economic contributor of the High Plains Region and it primarily relies on the High Plains Aquifer as a source of water. Over time, areas of the High Plains Aquifer have experienced drawdowns limiting its ability to supply sufficient water to sustain fully irrigated crop production. This among other reasons, including variable climatic factors and differences in state water policy, has resulted in some areas adopting and practicing deficit irrigation management. Considerable research has been conducted across the High Plains Aquifer region to identify locally appropriate deficit irrigation strategies. This review summarizes and discusses research conducted in Nebraska, Colorado, Kansas, and Texas, as well as highlights areas for future research. Editor's note : This paper is part of the featured series on Optimizing Ogallala Aquifer Water Use to Sustain Food Systems. See the February 2019 issue for the introduction and background to the series.     

State-space dynamic model for estimation of radon entry rate, based on Kalman filtering

To predict the radon concentration in a house environment and to understand the role of all factors affecting its behavior, it is necessary to recognize time variation in both air exchange rate and radon entry rate into a house. This paper describes a new approach to the separation of their effects, which effectively allows continuous estimation of both radon entry rate and air exchange rate from simultaneous tracer gas (carbon monoxide) and radon gas measurement data. It is based on a state-space statistical model which permits quick and efficient calculations. Underlying computations are based on (extended) Kalman filtering, whose practical software implementation is easy. Key property is the model's flexibility, so that it can be easily adjusted to handle various artificial regimens of both radon gas and CO gas level manipulation. After introducing the statistical model formally, its performance will be demonstrated on real data from measurements conducted in our experimental, naturally ventilated and unoccupied room. To verify our method, radon entry rate calculated via proposed statistical model was compared with its known reference value. The results from several days of measurement indicated fairly good agreement (up to 5% between reference value radon entry rate and its value calculated continuously via proposed method, in average). Measured radon concentration moved around the level approximately 600 Bq m(-3), whereas the range of air exchange rate was 0.3-0.8 (h(-1)).     

Organic acid profile and phenolic and sugar content in Salix purpurea × viminalis L. cultivated with different spent mushroom substrate and copper additions

The aim of the study was to determine the response of Salix purpurea?×?viminalis L. growing on Pleurotus ostreatus spent mushroom substrate (SMS) with different copper (Cu) addition. The content of Cu in roots, leaves and shoots was reduced by SMS addition. A decrease of biomass was observed with simultaneous Cu concentration increase. SMS induced leaf and root elongation of Cu-treated plants. Variation in the profile of low molecular weight organic acids with the domination of oxalic and acetic acids was observed. The total phenolic content significantly increased for plants cultivated with SMS, while the biosynthesis of salicylic acid was considerably weakened. The content of sugars was generally reduced by SMS. Alteration in the level of the stress-related molecules suggests mitigation of the harmful effect of Cu on Salix hybrid metabolism by SMS addition. This pointed to the possibility of using SMS in contaminated soil to reduce the toxic effect of metals on plants used in phytoextraction.     

Behavioural,emotional, and cognitive responses in European disasters: results of survivor interviews

In the European multi‐centre study BeSeCu (Behaviour, Security, Culture), interviews were conducted in seven countries to explore survivors’ emotional, behavioural, and cognitive responses during disasters. Interviews, either in groups or one‐to‐one, were convened according to type of event: collapse of a building; earthquake; fire; flood; and terror attack. The content analysis of interviews resulted in a theoretical framework, describing the course of the events, behavioural responses, and the emotional and cognitive processing of survivors. While the environmental cues and the ability to recognise what was happening varied in different disasters, survivors’ responses tended to be more universal across events, and most often were adaptive and non‐selfish. Several peri‐traumatic factors related to current levels of post‐traumatic stress were identified, while memory quantity did not differ as a function of event type or post‐traumatic stress. Time since the event had a minor effect on recall. Based on the findings, several suggestions for emergency training are made.     

An analysis of the dust deposition on solar photovoltaic modules

Environmental Science and Pollution Research - Solid particles impair the performance of the photovoltaic (PV) modules. This results in power losses which lower the efficiency of the system as well...     

Adsorptive micellar flocculation as an efficient method for processing soil extracts containing both surfactant and polychlorinated biphenyls: practical demonstration.

The main purpose of the paper is to share the results and experience from processing soil extracts containing a high concentration of both anionic surfactant and polychlorinated biphenyls (PCBs) by use of method the called adsorptive micellar flocculation. The method is similar to coagulation, but the mechanism is more complicated. The flocculants examined in the laboratory section involved ferric chloride, aluminium chloride, ferric sulfate, and aluminum sulfate. It was observed that ferric chloride provides the best PCB removal efficiency from the extract. Subsequently, two extracts obtained from the pilot-scale demonstration of the PCBs leaching from the soils by the surfactant solution were processed by this method. The volume of the extracts processed was several hundred liters. The method proved it can remove PCBs from all extracts with a very high efficiency (greater than 99.99%). The residual PCB concentrations in solution were less than 1 microg/L.     

Anaerobic Biodegradation of Polymer Composites Filled with Natural Fibers

Polymer composites with natural fibers prepared by melt blending were investigated. Synthetic and natural macromolecules were used, including poly(lactic acid), polyhydroxybutyrate-co-polyhydroxyvalerate and low density polyethylene. These polymers were filled with flax fibers. Mechanical properties of the composites, biogas production and mass loss under anaerobic digestion have been presented. It has been shown that the mechanical properties sustain after 28 days of biodegradation. Such materials can be found in applications as packaging, as well as in medicine as polymeric scaffolds, and drug delivery systems etc.     

Feedstock recycling of waste polymers by thermal cracking in molten metal: thermodynamic analysis

Waste plastics contribute to serious environmental and social problems, such as the loss of natural resources, environmental pollution, and depletion of landfill space, but they also create demands on the environmentally-oriented part of the society. Feedstock recycling of scrap polymers by thermal and chemical methods is well known and environmentally accepted. The paper presents the results of thermodynamic analysis of the conversion of polyolefins in a fuel-like mixture of hydrocarbons using thermal cracking in a new type of tubular reactor with molten metal. Evaluation of the efficiency of the process was based on exergy calculations. Calculated exergy efficiency was ca. 79.5 %. It means that feedstock recycling of waste is better from an energetic and environmental point of view than other processes, particularly incineration.     

Application of various methods to determine the lipophilicity parameters of the selected urea pesticides as predictors of their bioaccumulation

Different lipophilicity procedures including a newly developed (based on O?cik's equation) was applied in order to compare various urea pesticides with herbicidal and also insecticidal activity, such as monolinuron, chlorotoluron, diuron, isoproturon, linuron, dimefuron, diflubenzuron, teflubenzuron and lufenuron. Lipophilicity parameters (R_MWS and R_MW0) of nine examined pesticides were determined on the chromatographic plates RP-8F₂₅₄ with the use of methanol–water as a mobile phase_. Similarity analysis enabled to group all examined pesticides depending on their lipophilic character and allowed to perform a more objective comparison of different lipophilicity parameters obtained for investigated compounds by means of thin-layer chromatography and by the use of computational methods. It was stated that with the number of fluorine in examined pesticides, the lipophilic character of insecticides and also their tendency to bioaccumulation in the living systems increases noticeably. The results of this work confirmed that a new procedure for determining the lipophilicity parameter (R_MW0) by O?cik's equation could be a suitable tool in the prediction of pesticide bioaccumulation in living system and may be used as an indicator in design of new urea pesticides, which will be safe for humans and the environment.